openwrt/target/linux/ipq40xx/base-files/etc
Nicholas Smith 7ea2f3d6e2 ipq40xx: add support for Telco X1 Pro
Telco X1 Pro is a Cat12 LTE-A Pro modem router.
Vendor firmware is based on a recent version of OpenWrt.
Flashing is possible via CLI using sysupgrade -F -n
The serial headers allow bootloader and console access
Serial setting: 115200  8N1

Brief Specifications:
IPQ4019 SoC
32MB flash
512MB RAM
4x gigabit LAN
1x gigabit WAN
Dual-band Wave-2 wifi
2x SMA LTE antenna connectors
2x RP-SMA wifi antennas
1x USB 2.0 port
1x Reset button
Serial headers installed
1x Nano SIM tray
1x Quectel EM-12G LTE-A Pro modem
1x M.2 slot attached to USB 3.0
1x internal micro SD card slot

Signed-off-by: Nicholas Smith <nicholas@nbembedded.com>
2022-03-19 20:05:00 +01:00
..
board.d ipq40xx: add support for Telco X1 Pro 2022-03-19 20:05:00 +01:00
hotplug.d/firmware ipq40xx: add MikroTik cAP ac support 2022-02-01 23:18:58 +01:00
init.d ipq40xx: add netgear wac510 support 2021-06-05 23:29:46 +02:00
uci-defaults ipq40xx: unbreak EZVIZ CS-W3-WD1200G EUP on 5.10 2021-12-04 00:36:47 +01:00
inittab ipq40xx: add support for Aruba AP-303 2019-12-20 17:48:52 +01:00