mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 23:12:32 +00:00
07723492e9
Some boards with firmware made with Senao SDK based on Linux 3.3
have the following lines in the OEM upgrade script at
/etc/fwupgrade.sh
local append=""
local CONF_TAR="/tmp/sysupgrade.tgz"
[ -f "$CONF_TAR" ] && append="-j $CONF_TAR"
and
\# check FWINFO filename
[ -z $(ls FWINFO* | grep -i ${modelname}) ] && errcode="1"
This addition also prevents needing to factory reset after flashing
for some boards that also have these lines in the script
\# Support downgrade but do default (Smart v2.x.x.x -> senaowrt v1.x.x.x)
[ $(ls FWINFO* | grep -i ${modelname} | cut -d "-" -f4 | cut -c 2) -lt 2 ] && append=""
Signed-off-by: Michael Pratt <mcpratt@pm.me>
39 lines
1.8 KiB
Makefile
39 lines
1.8 KiB
Makefile
DEVICE_VARS += SENAO_IMGNAME
|
|
|
|
# This needs to make OEM config archive 'sysupgrade.tgz' an empty file prior to OEM
|
|
# sysupgrade, as otherwise it will implant the old configuration from
|
|
# OEM firmware when writing rootfs from factory.bin
|
|
# rootfs size and checksum is taken from a squashfs header
|
|
# the header does not exist, therefore, supply the size and md5
|
|
define Build/senao-tar-gz
|
|
-[ -f "$@" ] && \
|
|
mkdir -p $@.tmp && \
|
|
touch $@.tmp/failsafe.bin && \
|
|
touch $@.tmp/FWINFO-$(word 1,$(1))-$(REVISION) && \
|
|
echo '#!/bin/sh' > $@.tmp/before-upgrade.sh && \
|
|
echo ': > /tmp/sysupgrade.tgz' >> $@.tmp/before-upgrade.sh && \
|
|
echo ': > /tmp/_sys/sysupgrade.tgz' >> $@.tmp/before-upgrade.sh && \
|
|
echo -n $$(( $$(cat $@ | wc -c) / 4096 * 4096 )) > $@.len && \
|
|
dd if=$@ bs=$$(cat $@.len) count=1 | md5sum - | cut -d ' ' -f 1 > $@.md5 && \
|
|
echo '#!/bin/sh' > $@.tmp/after-upgrade.sh && \
|
|
printf 'fw_setenv rootfs_size 0x%08x\n' $$(cat $@.len) >> $@.tmp/after-upgrade.sh && \
|
|
printf 'fw_setenv rootfs_checksum %s\n' $$(cat $@.md5) >> $@.tmp/after-upgrade.sh && \
|
|
$(CP) $(KDIR)/loader-$(DEVICE_NAME).uImage \
|
|
$@.tmp/openwrt-$(word 1,$(1))-uImage-lzma.bin && \
|
|
$(CP) $@ $@.tmp/openwrt-$(word 1,$(1))-root.squashfs && \
|
|
$(TAR) -cp --numeric-owner --owner=0 --group=0 --mode=a-s --sort=name \
|
|
$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
|
|
-C $@.tmp . | gzip -9n > $@ && \
|
|
rm -rf $@.tmp $@.len $@.md5
|
|
endef
|
|
|
|
define Device/senao_loader_okli
|
|
$(Device/loader-okli-uimage)
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x73714f4b
|
|
LOADER_KERNEL_MAGIC := 0x73714f4b
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \
|
|
check-size | senao-tar-gz $$$$(SENAO_IMGNAME)
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/factory.bin) | append-metadata
|
|
endef
|