mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 23:42:43 +00:00
525 lines
13 KiB
C
525 lines
13 KiB
C
/*
|
|
* Serial driver for ADM5120 SoC
|
|
*
|
|
* Derived from drivers/serial/uart00.c
|
|
* Copyright 2001 Altera Corporation
|
|
*
|
|
* Some pieces are derived from the ADMtek 2.4 serial driver.
|
|
* Copyright (C) ADMtek Incorporated, 2003
|
|
* daniell@admtek.com.tw
|
|
* Which again was derived from drivers/char/serial.c
|
|
* Copyright (C) Linus Torvalds et al.
|
|
*
|
|
* Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
|
|
*/
|
|
|
|
#include <linux/autoconf.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/console.h>
|
|
|
|
#define ADM5120_UART_BASE0 0x12600000
|
|
#define ADM5120_UART_BASE1 0x12800000
|
|
#define ADM5120_UART_SIZE 0x20
|
|
|
|
#define ADM5120_UART_IRQ0 1
|
|
#define ADM5120_UART_IRQ1 2
|
|
|
|
#define ADM5120_UART_REG(base, reg) \
|
|
(*(volatile u32 *)KSEG1ADDR((base)+(reg)))
|
|
|
|
#define ADM5120_UARTCLK_FREQ 62500000
|
|
#define ADM5120_UART_BAUDDIV(rate) ((unsigned long)(ADM5120_UARTCLK_FREQ/(16*(_rate)) - 1))
|
|
|
|
#define ADM5120_UART_BAUD115200 ADM5120_UART_BAUDDIV(115200)
|
|
|
|
#define ADM5120_UART_DATA 0x00
|
|
#define ADM5120_UART_RS 0x04
|
|
#define ADM5120_UART_LCR_H 0x08
|
|
#define ADM5120_UART_LCR_M 0x0c
|
|
#define ADM5120_UART_LCR_L 0x10
|
|
#define ADM5120_UART_CR 0x14
|
|
#define ADM5120_UART_FR 0x18
|
|
#define ADM5120_UART_IR 0x1c
|
|
|
|
#define ADM5120_UART_FE 0x01
|
|
#define ADM5120_UART_PE 0x02
|
|
#define ADM5120_UART_BE 0x04
|
|
#define ADM5120_UART_OE 0x08
|
|
#define ADM5120_UART_ERR 0x0f
|
|
#define ADM5120_UART_FIFO_EN 0x10
|
|
#define ADM5120_UART_EN 0x01
|
|
#define ADM5120_UART_TIE 0x20
|
|
#define ADM5120_UART_RIE 0x50
|
|
#define ADM5120_UART_IE 0x78
|
|
#define ADM5120_UART_CTS 0x01
|
|
#define ADM5120_UART_DSR 0x02
|
|
#define ADM5120_UART_DCD 0x04
|
|
#define ADM5120_UART_TXFF 0x20
|
|
#define ADM5120_UART_TXFE 0x80
|
|
#define ADM5120_UART_RXFE 0x10
|
|
#define ADM5120_UART_BRK 0x01
|
|
#define ADM5120_UART_PEN 0x02
|
|
#define ADM5120_UART_EPS 0x04
|
|
#define ADM5120_UART_STP2 0x08
|
|
#define ADM5120_UART_W5 0x00
|
|
#define ADM5120_UART_W6 0x20
|
|
#define ADM5120_UART_W7 0x40
|
|
#define ADM5120_UART_W8 0x60
|
|
#define ADM5120_UART_MIS 0x01
|
|
#define ADM5120_UART_RIS 0x02
|
|
#define ADM5120_UART_TIS 0x04
|
|
#define ADM5120_UART_RTIS 0x08
|
|
|
|
static void adm5120ser_stop_tx(struct uart_port *port)
|
|
{
|
|
ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_TIE;
|
|
}
|
|
|
|
static void adm5120ser_irq_rx(struct uart_port *port)
|
|
{
|
|
struct tty_struct *tty = port->info->tty;
|
|
unsigned int status, ch, rds, flg, ignored = 0;
|
|
|
|
status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
|
|
while (!(status & ADM5120_UART_RXFE)) {
|
|
/*
|
|
* We need to read rds before reading the
|
|
* character from the fifo
|
|
*/
|
|
rds = ADM5120_UART_REG(port->iobase, ADM5120_UART_RS);
|
|
ch = ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA);
|
|
port->icount.rx++;
|
|
|
|
if (tty->low_latency)
|
|
tty_flip_buffer_push(tty);
|
|
|
|
flg = TTY_NORMAL;
|
|
|
|
/*
|
|
* Note that the error handling code is
|
|
* out of the main execution path
|
|
*/
|
|
if (rds & ADM5120_UART_ERR)
|
|
goto handle_error;
|
|
if (uart_handle_sysrq_char(port, ch))
|
|
goto ignore_char;
|
|
|
|
error_return:
|
|
tty_insert_flip_char(tty, ch, flg);
|
|
|
|
ignore_char:
|
|
status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
|
|
}
|
|
out:
|
|
tty_flip_buffer_push(tty);
|
|
return;
|
|
|
|
handle_error:
|
|
ADM5120_UART_REG(port->iobase, ADM5120_UART_RS) = 0xff;
|
|
if (rds & ADM5120_UART_BE) {
|
|
port->icount.brk++;
|
|
if (uart_handle_break(port))
|
|
goto ignore_char;
|
|
} else if (rds & ADM5120_UART_PE)
|
|
port->icount.parity++;
|
|
else if (rds & ADM5120_UART_FE)
|
|
port->icount.frame++;
|
|
if (rds & ADM5120_UART_OE)
|
|
port->icount.overrun++;
|
|
|
|
if (rds & port->ignore_status_mask) {
|
|
if (++ignored > 100)
|
|
goto out;
|
|
goto ignore_char;
|
|
}
|
|
rds &= port->read_status_mask;
|
|
|
|
if (rds & ADM5120_UART_BE)
|
|
flg = TTY_BREAK;
|
|
else if (rds & ADM5120_UART_PE)
|
|
flg = TTY_PARITY;
|
|
else if (rds & ADM5120_UART_FE)
|
|
flg = TTY_FRAME;
|
|
|
|
if (rds & ADM5120_UART_OE) {
|
|
/*
|
|
* CHECK: does overrun affect the current character?
|
|
* ASSUMPTION: it does not.
|
|
*/
|
|
tty_insert_flip_char(tty, ch, flg);
|
|
ch = 0;
|
|
flg = TTY_OVERRUN;
|
|
}
|
|
#ifdef CONFIG_MAGIC_SYSRQ
|
|
port->sysrq = 0;
|
|
#endif
|
|
goto error_return;
|
|
}
|
|
|
|
static void adm5120ser_irq_tx(struct uart_port *port)
|
|
{
|
|
struct circ_buf *xmit = &port->info->xmit;
|
|
int count;
|
|
|
|
if (port->x_char) {
|
|
ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA) =
|
|
port->x_char;
|
|
port->icount.tx++;
|
|
port->x_char = 0;
|
|
return;
|
|
}
|
|
if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
|
|
adm5120ser_stop_tx(port);
|
|
return;
|
|
}
|
|
|
|
count = port->fifosize >> 1;
|
|
do {
|
|
ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA) =
|
|
xmit->buf[xmit->tail];
|
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
|
port->icount.tx++;
|
|
if (uart_circ_empty(xmit))
|
|
break;
|
|
} while (--count > 0);
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(port);
|
|
|
|
if (uart_circ_empty(xmit))
|
|
adm5120ser_stop_tx(port);
|
|
}
|
|
|
|
static void adm5120ser_irq_modem(struct uart_port *port)
|
|
{
|
|
unsigned int status;
|
|
|
|
status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
|
|
|
|
if (status & ADM5120_UART_DCD)
|
|
uart_handle_dcd_change(port, status & ADM5120_UART_DCD);
|
|
|
|
if (status & ADM5120_UART_DSR)
|
|
port->icount.dsr++;
|
|
|
|
if (status & ADM5120_UART_CTS)
|
|
uart_handle_cts_change(port, status & ADM5120_UART_CTS);
|
|
|
|
wake_up_interruptible(&port->info->delta_msr_wait);
|
|
}
|
|
|
|
static irqreturn_t adm5120ser_irq(int irq, void *dev_id)
|
|
{
|
|
struct uart_port *port = dev_id;
|
|
unsigned long ir = ADM5120_UART_REG(port->iobase, ADM5120_UART_IR);
|
|
|
|
if (ir & (ADM5120_UART_RIS | ADM5120_UART_RTIS))
|
|
adm5120ser_irq_rx(port);
|
|
if (ir & ADM5120_UART_TIS)
|
|
adm5120ser_irq_tx(port);
|
|
if (ir & ADM5120_UART_MIS) {
|
|
adm5120ser_irq_modem(port);
|
|
ADM5120_UART_REG(port->iobase, ADM5120_UART_IR) = 0xff;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static unsigned int adm5120ser_tx_empty(struct uart_port *port)
|
|
{
|
|
unsigned int fr = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
|
|
return (fr & ADM5120_UART_TXFE) ? TIOCSER_TEMT : 0;
|
|
}
|
|
|
|
static void adm5120ser_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
{
|
|
}
|
|
|
|
static unsigned int adm5120ser_get_mctrl(struct uart_port *port)
|
|
{
|
|
unsigned int result = 0;
|
|
unsigned int fr = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
|
|
|
|
if (fr & ADM5120_UART_CTS)
|
|
result |= TIOCM_CTS;
|
|
if (fr & ADM5120_UART_DSR)
|
|
result |= TIOCM_DSR;
|
|
if (fr & ADM5120_UART_DCD)
|
|
result |= TIOCM_CAR;
|
|
return result;
|
|
}
|
|
|
|
static void adm5120ser_start_tx(struct uart_port *port)
|
|
{
|
|
ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) |= ADM5120_UART_TIE;
|
|
}
|
|
|
|
static void adm5120ser_stop_rx(struct uart_port *port)
|
|
{
|
|
ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_RIE;
|
|
}
|
|
|
|
static void adm5120ser_enable_ms(struct uart_port *port)
|
|
{
|
|
}
|
|
|
|
static void adm5120ser_break_ctl(struct uart_port *port, int break_state)
|
|
{
|
|
unsigned long flags;
|
|
unsigned long lcrh;
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
lcrh = ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H);
|
|
if (break_state == -1)
|
|
lcrh |= ADM5120_UART_BRK;
|
|
else
|
|
lcrh &= ~ADM5120_UART_BRK;
|
|
ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) = lcrh;
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
}
|
|
|
|
static int adm5120ser_startup(struct uart_port *port)
|
|
{
|
|
int ret;
|
|
|
|
ret = request_irq(port->irq, adm5120ser_irq, 0, "ADM5120 UART", port);
|
|
if (ret) {
|
|
printk(KERN_ERR "Couldn't get irq %d\n", port->irq);
|
|
return ret;
|
|
}
|
|
ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) |=
|
|
ADM5120_UART_FIFO_EN;
|
|
ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) |=
|
|
ADM5120_UART_EN | ADM5120_UART_IE;
|
|
return 0;
|
|
}
|
|
|
|
static void adm5120ser_shutdown(struct uart_port *port)
|
|
{
|
|
ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_IE;
|
|
free_irq(port->irq, port);
|
|
}
|
|
|
|
static void adm5120ser_set_termios(struct uart_port *port,
|
|
struct termios *termios, struct termios *old)
|
|
{
|
|
unsigned int baud, quot, lcrh;
|
|
unsigned long flags;
|
|
|
|
termios->c_cflag |= CREAD;
|
|
|
|
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
|
|
quot = uart_get_divisor(port, baud);
|
|
|
|
lcrh = ADM5120_UART_FIFO_EN;
|
|
switch (termios->c_cflag & CSIZE) {
|
|
case CS5:
|
|
lcrh |= ADM5120_UART_W5;
|
|
break;
|
|
case CS6:
|
|
lcrh |= ADM5120_UART_W6;
|
|
break;
|
|
case CS7:
|
|
lcrh |= ADM5120_UART_W7;
|
|
break;
|
|
default:
|
|
lcrh |= ADM5120_UART_W8;
|
|
break;
|
|
}
|
|
if (termios->c_cflag & CSTOPB)
|
|
lcrh |= ADM5120_UART_STP2;
|
|
if (termios->c_cflag & PARENB) {
|
|
lcrh |= ADM5120_UART_PEN;
|
|
if (!(termios->c_cflag & PARODD))
|
|
lcrh |= ADM5120_UART_EPS;
|
|
}
|
|
|
|
spin_lock_irqsave(port->lock, flags);
|
|
|
|
ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) = lcrh;
|
|
|
|
/*
|
|
* Update the per-port timeout.
|
|
*/
|
|
uart_update_timeout(port, termios->c_cflag, baud);
|
|
|
|
port->read_status_mask = ADM5120_UART_OE;
|
|
if (termios->c_iflag & INPCK)
|
|
port->read_status_mask |= ADM5120_UART_FE | ADM5120_UART_PE;
|
|
if (termios->c_iflag & (BRKINT | PARMRK))
|
|
port->read_status_mask |= ADM5120_UART_BE;
|
|
|
|
/*
|
|
* Characters to ignore
|
|
*/
|
|
port->ignore_status_mask = 0;
|
|
if (termios->c_iflag & IGNPAR)
|
|
port->ignore_status_mask |= ADM5120_UART_FE | ADM5120_UART_PE;
|
|
if (termios->c_iflag & IGNBRK) {
|
|
port->ignore_status_mask |= ADM5120_UART_BE;
|
|
/*
|
|
* If we're ignoring parity and break indicators,
|
|
* ignore overruns to (for real raw support).
|
|
*/
|
|
if (termios->c_iflag & IGNPAR)
|
|
port->ignore_status_mask |= ADM5120_UART_OE;
|
|
}
|
|
|
|
quot = ADM5120_UART_BAUD115200;
|
|
ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_L) = quot & 0xff;
|
|
ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_M) = quot >> 8;
|
|
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
}
|
|
|
|
static const char *adm5120ser_type(struct uart_port *port)
|
|
{
|
|
return port->type == PORT_ADM5120 ? "ADM5120" : NULL;
|
|
}
|
|
|
|
static void adm5120ser_config_port(struct uart_port *port, int flags)
|
|
{
|
|
if (flags & UART_CONFIG_TYPE)
|
|
port->type = PORT_ADM5120;
|
|
}
|
|
|
|
static void adm5120ser_release_port(struct uart_port *port)
|
|
{
|
|
release_mem_region(port->iobase, ADM5120_UART_SIZE);
|
|
}
|
|
|
|
static int adm5120ser_request_port(struct uart_port *port)
|
|
{
|
|
return request_mem_region(port->iobase, ADM5120_UART_SIZE,
|
|
"adm5120-uart") != NULL ? 0 : -EBUSY;
|
|
}
|
|
|
|
static struct uart_ops adm5120ser_ops = {
|
|
.tx_empty = adm5120ser_tx_empty,
|
|
.set_mctrl = adm5120ser_set_mctrl,
|
|
.get_mctrl = adm5120ser_get_mctrl,
|
|
.stop_tx = adm5120ser_stop_tx,
|
|
.start_tx = adm5120ser_start_tx,
|
|
.stop_rx = adm5120ser_stop_rx,
|
|
.enable_ms = adm5120ser_enable_ms,
|
|
.break_ctl = adm5120ser_break_ctl,
|
|
.startup = adm5120ser_startup,
|
|
.shutdown = adm5120ser_shutdown,
|
|
.set_termios = adm5120ser_set_termios,
|
|
.type = adm5120ser_type,
|
|
.config_port = adm5120ser_config_port,
|
|
.release_port = adm5120ser_release_port,
|
|
.request_port = adm5120ser_request_port,
|
|
};
|
|
|
|
static void adm5120console_put(const char c)
|
|
{
|
|
while ((ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_FR) &
|
|
ADM5120_UART_TXFF) != 0);
|
|
ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_DATA) = c;
|
|
}
|
|
|
|
static void adm5120console_write(struct console *con, const char *s,
|
|
unsigned int count)
|
|
{
|
|
while (count--) {
|
|
if (*s == '\n')
|
|
adm5120console_put('\r');
|
|
adm5120console_put(*s);
|
|
s++;
|
|
}
|
|
}
|
|
|
|
static int __init adm5120console_setup(struct console *con, char *options)
|
|
{
|
|
/* Set to 115200 baud, 8N1 and enable FIFO */
|
|
ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_LCR_L) =
|
|
ADM5120_UART_BAUD115200 & 0xff;
|
|
ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_LCR_M) =
|
|
ADM5120_UART_BAUD115200 >> 8;
|
|
ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_LCR_H) =
|
|
ADM5120_UART_W8 | ADM5120_UART_FIFO_EN;
|
|
/* Enable port */
|
|
ADM5120_UART_REG(ADM5120_UART_BASE0, ADM5120_UART_CR) =
|
|
ADM5120_UART_EN;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct uart_driver adm5120ser_reg;
|
|
|
|
static struct console adm5120_serconsole = {
|
|
.name = "ttyS",
|
|
.write = adm5120console_write,
|
|
.device = uart_console_device,
|
|
.setup = adm5120console_setup,
|
|
.flags = CON_PRINTBUFFER,
|
|
.cflag = B115200 | CS8 | CREAD,
|
|
.index = 0,
|
|
.data = &adm5120ser_reg,
|
|
};
|
|
|
|
static int __init adm5120console_init(void)
|
|
{
|
|
register_console(&adm5120_serconsole);
|
|
return 0;
|
|
}
|
|
|
|
console_initcall(adm5120console_init);
|
|
|
|
|
|
static struct uart_port adm5120ser_ports[] = {
|
|
{
|
|
.iobase = ADM5120_UART_BASE0,
|
|
.irq = ADM5120_UART_IRQ0,
|
|
.uartclk = ADM5120_UARTCLK_FREQ,
|
|
.fifosize = 16,
|
|
.ops = &adm5120ser_ops,
|
|
.line = 0,
|
|
.flags = ASYNC_BOOT_AUTOCONF,
|
|
},
|
|
#if (CONFIG_ADM5120_NR_UARTS > 1)
|
|
{
|
|
.iobase = ADM5120_UART_BASE1,
|
|
.irq = ADM5120_UART_IRQ1,
|
|
.uartclk = ADM5120_UARTCLK_FREQ,
|
|
.fifosize = 16,
|
|
.ops = &adm5120ser_ops,
|
|
.line = 1,
|
|
.flags = ASYNC_BOOT_AUTOCONF,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
static struct uart_driver adm5120ser_reg = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = "ttyS",
|
|
.dev_name = "ttyS",
|
|
.major = TTY_MAJOR,
|
|
.minor = 64,
|
|
.nr = CONFIG_ADM5120_NR_UARTS,
|
|
.cons = &adm5120_serconsole,
|
|
};
|
|
|
|
static int __init adm5120ser_init(void)
|
|
{
|
|
int ret, i;
|
|
|
|
ret = uart_register_driver(&adm5120ser_reg);
|
|
if (!ret) {
|
|
for (i = 0; i < CONFIG_ADM5120_NR_UARTS; i++)
|
|
uart_add_one_port(&adm5120ser_reg, &adm5120ser_ports[i]);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
__initcall(adm5120ser_init);
|