ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-01-11 15:33:03 +00:00
Code Issues Actions 1 Packages Projects Releases Wiki Activity
d9a00c5e2d
openwrt/target/linux/ath79/image
History
Tomasz Maciej Nowak 43c7132bf8 ath79: add support for MikroTik RouterBOARD 911 Lite2/Lite5 
Forward-port from ar71xx target the board introduced in commit
eb9e3651dd (" ar71xx: add support for the MikroTik RB911-2Hn/5Hn
boards"). Citing:

The patch adds support for the MikroTik RB911-2Hn (911 Lite2)
and the RB911-5Hn (911 Lite5) boards:

  https://mikrotik.com/product/RB911-2Hn
  https://mikrotik.com/product/RB911-5Hn

The two boards are using the same hardware design, the only difference
between the two is the supported wireless band.

Specifications:
  * SoC: Atheros AR9344 (600MHz)
  * RAM: 64MiB
  * Storage: 16 MiB SPI NOR flash
  * Ethernet: 1x100M (Passive PoE in)
  * Wireless: AR9344 built-in wireless MAC, single chain
              802.11b/g/n (911-2Hn) or 802.11a/g/n (911-5Hn)

Notes:
  * Older versions of these boards might be equipped with a NAND
    flash chip instead of the SPI NOR device. Those boards are not
    supported (yet).[1]
  * The MikroTik RB911-5HnD (911 Lite5 Dual) board also uses the
    same hardware. Support for that can be added later with little
    effort probably.[2]

End of citation.

Follow intallation instruction from that commit message, using
openwrt-ath79-mikrotik-mikrotik_routerboard-911-lite-initramfs-kernel.bin
and
openwrt-ath79-mikrotik-mikrotik_routerboard-911-lite-squashfs-sysupgrade.bin
images found in ath79/mikrotik directory. Be advised that the board
accepts 10-30 V on PoE input.

Known issues
Compared to ar71xx target image, there is still small leak of current to
user LED, which makes it lit, although weaker, even if brightness is set
to 0. The cause of that is still unknown.

1. https://github.com/openwrt/openwrt/pull/3652
2. RB911-5HnD should work with this commit or with [1], depending on
   what flash topology was used.

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2023-02-26 22:22:48 +01:00
..
bin
lzma-loader ath79: lzma-loader: allow setting custom kernel magic 2021-04-08 09:20:59 +02:00
common-buffalo.mk
common-mikrotik.mk ath79: mikrotik: use OpenWrt loader for initram image 2022-09-11 01:30:11 +02:00
common-netgear.mk tools/squashfs: rename to squashfs3-lzma 2023-02-18 21:11:36 +01:00
common-senao.mk ath79: use lzma-loader for Senao initramfs images 2023-01-06 15:34:07 +01:00
common-tp-link.mk treewide: call check-size before append-metadata 2021-07-10 19:40:10 +02:00
common-ubnt.mk ath79: switch some RedBoot based devices to OKLI loader 2022-06-24 17:09:54 +02:00
common-yuncore.mk
generic-tp-link.mk ath79: add support for TP-Link CPE605-v1 2022-12-13 23:17:27 +01:00
generic-ubnt.mk treewide: replace wpad-basic-wolfssl default 2023-02-04 02:35:03 +01:00
generic.mk ath79: add support for Senao Engenius ESR1200 2023-02-12 18:07:31 +01:00
Makefile ath79: image: don't depend on other COMPILE targets 2022-12-19 12:27:35 +00:00
mikrotik.mk ath79: add support for MikroTik RouterBOARD 911 Lite2/Lite5 2023-02-26 22:22:48 +01:00
nand.mk ath79: add support for GL.iNet GL-X1200 2023-02-25 14:31:42 +01:00
tiny-netgear.mk
tiny-tp-link.mk ath79: tiny: Do not build TPLink WPA8630Pv2 by default 2023-01-06 18:52:01 +01:00
tiny-ubnt.mk ath79: move ubnt-xm to tiny 2022-06-11 21:22:58 +02:00
tiny.mk ath79: image: use 'kmod-usb-chipidea2' for AR933x devices 2022-02-21 22:22:30 +01:00