openwrt/target/linux
Rafał Miłecki d92a9c97bf bcm4908: enable Netgear R8000P bootloader image
This enables building BCM4908 "raw" image that can be flashed using
bootloader web UI. It requires serial console access & stopping booting
by the "Press any key to stop auto run".

It's easy to build vendor like CHK image but it can't be safely flashed
using vendor UI at this point. Netgear implements method called "NAND
incremental flashing" that doesn't seem to flash bootfs partition as
provided.

Above method seems to update vmlinux.lz without updating 94908.dtb. It
prevents OpenWrt kernel from booting due to incomplete DTB file. Full
Netgear R8000P support can be enabled after finding a way to make vendor
firmware flash OpenWrt firmware including the 94908.dtb update.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-04-08 10:50:59 +02:00
..
apm821xx kernel: bump 5.10 to 5.10.24 2021-03-24 11:36:31 +00:00
arc770 treewide: remove execute bit and shebang from board.d files 2021-03-06 11:30:06 +01:00
archs38 archs38: Add CONFIG_HZ=100 2021-03-19 18:00:22 +01:00
armvirt armvirt: add 5.10 testing kernel 2021-04-03 18:56:02 +02:00
at91 treewide: make AddDepends/usb-serial selective 2021-03-06 12:38:38 +01:00
ath25 treewide: remove execute bit and shebang from board.d files 2021-03-06 11:30:06 +01:00
ath79 ath79: move pcie node to DTSI for qca955x Senao APs 2021-04-08 09:20:59 +02:00
bcm27xx kernel: bump 5.4 to 5.4.108 2021-03-27 16:39:31 +01:00
bcm47xx bcm47xx: make WGT634U NVRAM patch apply again 2021-03-12 21:09:11 +01:00
bcm53xx bcm53xx: enhance support for Linksys EA9500 2021-04-01 08:58:14 +02:00
bcm63xx kernel: bump 5.10 to 5.10.26 2021-03-26 08:19:11 +00:00
bcm4908 bcm4908: enable Netgear R8000P bootloader image 2021-04-08 10:50:59 +02:00
bmips kernel: bump 5.10 to 5.10.27 2021-04-03 21:07:22 +01:00
gemini kernel: Move CONFIG_USERIO to generic config 2021-03-27 14:34:22 +01:00
generic kernel: bump 5.10 to 5.10.27 2021-04-03 21:07:22 +01:00
imx6 kernel: move some disabled symbols to generic 2021-03-19 00:59:22 +01:00
ipq40xx ipq40xx: add MikroTik hAP ac2 support 2021-04-05 04:13:28 +02:00
ipq806x kernel: bump 5.4 to 5.4.109 2021-04-02 16:45:28 +02:00
ipq807x kernel: move some disabled symbols to generic 2021-03-19 00:59:22 +01:00
kirkwood kernel: backport 5.13 mtd partitioning changes 2021-03-29 08:46:17 +02:00
lantiq lantiq: add basic support for AVM FRITZ!Box 3390 2021-04-03 18:56:51 +02:00
layerscape kernel: bump 5.4 to 5.4.109 2021-04-02 16:45:28 +02:00
malta kernel: Move CONFIG_USERIO to generic config 2021-03-27 14:34:22 +01:00
mediatek kernel: bump 5.4 to 5.4.109 2021-04-02 16:45:28 +02:00
mpc85xx treewide: remove execute bit and shebang from board.d files 2021-03-06 11:30:06 +01:00
mvebu kernel: backport 5.13 mtd partitioning changes 2021-03-29 08:46:17 +02:00
mxs treewide: remove execute bit and shebang from board.d files 2021-03-06 11:30:06 +01:00
octeon kernel: move some disabled symbols to generic 2021-03-19 00:59:22 +01:00
octeontx kernel: move some disabled symbols to generic 2021-03-19 00:59:22 +01:00
omap kernel: Move CONFIG_USERIO to generic config 2021-03-27 14:34:22 +01:00
oxnas kernel: Move CONFIG_USERIO to generic config 2021-03-27 14:34:22 +01:00
pistachio kernel: add pending mtd patches adding NVMEM support 2021-03-12 18:49:46 +01:00
ramips ramips: rt305x: use lzma-loader for ZyXEL Keenetic Lite rev.B 2021-04-08 09:20:59 +02:00
realtek realtek: allow writing to "u-boot-env2" 2021-04-08 09:20:59 +02:00
rockchip kernel: bump 5.10 to 5.10.27 2021-04-03 21:07:22 +01:00
sunxi sunxi: enable wifi module on Pine64 boards 2021-03-29 21:44:34 +02:00
tegra kernel: Move CONFIG_USERIO to generic config 2021-03-27 14:34:22 +01:00
uml target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00
x86 kernel: Move CONFIG_USERIO to generic config 2021-03-27 14:34:22 +01:00
zynq kernel: Move CONFIG_USERIO to generic config 2021-03-27 14:34:22 +01:00
Makefile target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00