mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 08:21:14 +00:00
c6aac196b8
The pinctrl initialization fails with the MSM pinctrl code and gpio-hogs because either the gpio ranges are not yet initialized (missing gpio-range in DT) or that the msm driver unconditionally tries to re-initializes the ranges (gpio-range in DT). To allow gpio-hogs and similar early-boot gpio code, the gpio-ranges must be in the device tree and the pinctrl-msm code must check whether the range was already initialized by the DT. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [drop changes to unrelated dtsi files, refresh patches] Signed-off-by: Mathias Kresin <dev@kresin.me>
53 lines
1.1 KiB
Diff
53 lines
1.1 KiB
Diff
From 09ed737593f71bcca08a537a6c15264a1a6add08 Mon Sep 17 00:00:00 2001
|
|
From: Christian Lamparter <chunkeey@gmail.com>
|
|
Date: Sun, 20 Nov 2016 01:10:33 +0100
|
|
Subject: [PATCH] dts: ipq4019: add mdio node for ethernet
|
|
|
|
This patch adds the mdio device-tree node.
|
|
This is where the switch is connected to, so it's needed
|
|
for the ethernet interfaces.
|
|
|
|
Note: The driver isn't anywhere close to be upstream,
|
|
so the info might change.
|
|
---
|
|
arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++
|
|
1 file changed, 28 insertions(+)
|
|
|
|
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
|
|
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
|
|
@@ -540,6 +540,34 @@
|
|
status = "disabled";
|
|
};
|
|
|
|
+ mdio@90000 {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ compatible = "qcom,ipq4019-mdio";
|
|
+ reg = <0x90000 0x64>;
|
|
+ status = "disabled";
|
|
+
|
|
+ ethernet-phy@0 {
|
|
+ reg = <0>;
|
|
+ };
|
|
+
|
|
+ ethernet-phy@1 {
|
|
+ reg = <1>;
|
|
+ };
|
|
+
|
|
+ ethernet-phy@2 {
|
|
+ reg = <2>;
|
|
+ };
|
|
+
|
|
+ ethernet-phy@3 {
|
|
+ reg = <3>;
|
|
+ };
|
|
+
|
|
+ ethernet-phy@4 {
|
|
+ reg = <4>;
|
|
+ };
|
|
+ };
|
|
+
|
|
usb3_ss_phy: ssphy@9a000 {
|
|
compatible = "qca,uni-ssphy";
|
|
reg = <0x9a000 0x800>;
|