mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 01:28:59 +00:00
d4c999bb89
backport from wireless-drivers-next, replacing some existing patches in our tree (marked with '=' are those which were already present): f483039cf51a rt2x00: use simple_read_from_buffer() =5c656c71b1bf rt2800: move usb specific txdone/txstatus routines to rt2800lib =0b0d556e0ebb rt2800mmio: use txdone/txstatus routines from lib =5022efb50f62 rt2x00: do not check for txstatus timeout every time on tasklet =adf26a356f13 rt2x00: use different txstatus timeouts when flushing =0240564430c0 rt2800: flush and txstatus rework for rt2800mmio 6eba8fd22352 rt2x00: rt2400pci: mark expected switch fall-through 10bb92217747 rt2x00: rt2500pci: mark expected switch fall-through 916e6bbcfcff rt2x00: rt2800lib: mark expected switch fall-throughs 641dd8068ecb rt2x00: rt61pci: mark expected switch fall-through 750afb08ca71 cross-tree: phase out dma_zalloc_coherent() =c2e28ef7711f rt2x00: reduce tx power to nominal level on RT6352 a4296994eb80 rt2x00: Work around a firmware bug with shared keys 2587791d5758 rt2x00: no need to check return value of debugfs_create functions pending on linux-wireless: rt2x00: remove unneeded check rt2x00: remove confusing AGC register rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band rt2800: enable TX_PIN_CFG_RFRX_EN only for MT7620 rt2800: comment and simplify AGC init for RT6352 rt2x00: do not print error when queue is full rt2800: partially restore old mmio txstatus behaviour rt2800: new flush implementation for SoC devices rt2800: move txstatus pending routine rt2800mmio: fetch tx status changes rt2800mmio: use timer and work for handling tx statuses timeouts rt2x00: remove last_nostatus_check rt2x00: remove not used entry field rt2x00mmio: remove legacy comment While at it also rename some existing patches now that there are separate folders with patches for each driver to make things a bit nicer to handle. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
45 lines
1.5 KiB
Diff
45 lines
1.5 KiB
Diff
From 916e6bbcfcff6cc5d7d33bba8557a30f3af50326 Mon Sep 17 00:00:00 2001
|
|
From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
|
|
Date: Mon, 22 Oct 2018 22:46:03 +0200
|
|
Subject: [PATCH 09/28] rt2x00: rt2800lib: mark expected switch fall-throughs
|
|
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
|
|
where we are expecting to fall through.
|
|
|
|
Addresses-Coverity-ID: 145198 ("Missing break in switch")
|
|
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
---
|
|
drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 4 ++++
|
|
1 file changed, 4 insertions(+)
|
|
|
|
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
|
|
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
|
|
@@ -2482,6 +2482,7 @@ static void rt2800_config_channel_rf3052
|
|
switch (rt2x00dev->default_ant.tx_chain_num) {
|
|
case 1:
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
|
|
+ /* fall through */
|
|
case 2:
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
|
|
break;
|
|
@@ -2490,6 +2491,7 @@ static void rt2800_config_channel_rf3052
|
|
switch (rt2x00dev->default_ant.rx_chain_num) {
|
|
case 1:
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
|
|
+ /* fall through */
|
|
case 2:
|
|
rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
|
|
break;
|
|
@@ -9457,8 +9459,10 @@ static int rt2800_probe_hw_mode(struct r
|
|
switch (rx_chains) {
|
|
case 3:
|
|
spec->ht.mcs.rx_mask[2] = 0xff;
|
|
+ /* fall through */
|
|
case 2:
|
|
spec->ht.mcs.rx_mask[1] = 0xff;
|
|
+ /* fall through */
|
|
case 1:
|
|
spec->ht.mcs.rx_mask[0] = 0xff;
|
|
spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */
|