mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 17:48:58 +00:00
d8e6c3f6d9
WHQX E1700AC v2 is based on Qualcomm QCA9563 + QCA9880 + QCA8334. Specification: - 750/400/250 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz (QCA9563) with external FEM (SKY85309-11) - 3T3R 5 GHz (QCA9880) with external FEM (SKY85728-11) - 2x 10/100/1000 Mbps Ethernet (one port with PoE support) - 1x miniPCIe slot (USB 2.0 bus only) - 1x microSIM slot - 1x USB 2.0 - 5x LED (4 driven by GPIO) - 1x button (reset) - 1x 2-pos switch - 1x DC jack for main power input (9-48 V) - UART (J5) and LEDs (J13) headers on PCB WHQX E600G is based on Qualcomm QCA9531. Specification: - 650/391/216 MHz (CPU/DDR/AHB) - 64/128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz (QCA9531) with external PA (LXK-6601) - 2x 10/100 Mbps Ethernet (one port with PoE support) - 1x miniPCIe slot (with PCIe and USB 2.0 buses) - 1x microSIM slot - 5x LED (4 driven by GPIO) - 1x button (reset) - 1x DC jack for main power input (9-48 V) - UART (J100), SIM (J34), JTAG (J5) and LEDs (J7) headers on PCB WHQX E600GAC is based on Qualcomm QCA9531 + QCA9887. Specification: - 650/391/216 MHz (CPU/DDR/AHB) - 64/128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz (QCA9531) - 1T1R 5 GHz (QCA9887) with external FEM (SKY85703-11) - 2x 10/100 Mbps Ethernet - 6x LED (1x RGB, 5 driven by GPIO) - 1x button (reset) - 1x DC jack for main power input (9-12 V) - UART (J100), USB (J102), JTAG (J5) and LEDs (J7) header on PCB Important notice: First version of these boards are using different mtd layout, with ART data at the end. You should not use v2 images on v1 board because it will result in lost of ART data! Flash instruction (using U-Boot CLI and tftp server): 1. Configure PC with static IP 192.168.1.10 and tftp server. 2. Rename "sysupgrade" filename to "firmware.bin" and place it in tftp server directory. 3. Connect PC with one of RJ45 ports, power up the board and press "enter" key to access U-Boot CLI. 4. Use the following command to update the device to OpenWrt: "run lfw". Flash instruction (using U-Boot web-based recovery): 1. Configure PC with static IP 192.168.1.xxx(2-254)/24. 2. Connect PC with one of RJ45 ports, press the reset button, power up the board and keep button pressed for around 6-7 seconds, until LEDs start flashing. 3. Open your browser and enter 192.168.1.1, select "sysupgrade" image and click the upgrade button. Signed-off-by: Peng Zhang <sd20@qxwlan.com> [reworked: image generation code, mach-* files, commit description, fixed minor code style issues, rebased on master] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
185 lines
4.6 KiB
C
185 lines
4.6 KiB
C
/*
|
|
* WHQX E600G/E600GAC v2 board support
|
|
*
|
|
* Copyright (C) 2017 Peng Zhang <sd20@qxwlan.com>
|
|
* Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include "common.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
#include "pci.h"
|
|
|
|
#define E600G_V2_GPIO_LED_LAN 16
|
|
#define E600G_V2_GPIO_LED_SYS 13
|
|
#define E600G_V2_GPIO_LED_WAN_B 4
|
|
#define E600G_V2_GPIO_LED_WAN_G 15
|
|
|
|
#define E600GAC_V2_GPIO_LED_CTRL_B 14
|
|
#define E600GAC_V2_GPIO_LED_CTRL_G 11
|
|
#define E600GAC_V2_GPIO_LED_CTRL_R 12
|
|
#define E600GAC_V2_GPIO_LED_LAN 16
|
|
#define E600GAC_V2_GPIO_LED_SYS 13
|
|
#define E600GAC_V2_GPIO_LED_WAN_G 15
|
|
#define E600GAC_V2_GPIO_LED_WAN_O 4
|
|
|
|
#define E600G_V2_GPIO_BTN_RESET 17
|
|
#define E600GAC_V2_GPIO_BTN_WPS 1
|
|
|
|
#define E600G_V2_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define E600G_V2_KEYS_DEBOUNCE_INTERVAL (3 * E600G_V2_KEYS_POLL_INTERVAL)
|
|
|
|
static struct gpio_led e600g_v2_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "e600g-v2:blue:system",
|
|
.gpio = E600G_V2_GPIO_LED_SYS,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "e600g-v2:blue:wan",
|
|
.gpio = E600G_V2_GPIO_LED_WAN_B,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "e600g-v2:green:lan",
|
|
.gpio = E600G_V2_GPIO_LED_LAN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "e600g-v2:green:wan",
|
|
.gpio = E600G_V2_GPIO_LED_WAN_G,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_led e600gac_v2_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "e600gac-v2:blue:control",
|
|
.gpio = E600GAC_V2_GPIO_LED_CTRL_B,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "e600gac-v2:green:control",
|
|
.gpio = E600GAC_V2_GPIO_LED_CTRL_G,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "e600gac-v2:red:control",
|
|
.gpio = E600GAC_V2_GPIO_LED_CTRL_R,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "e600gac-v2:green:system",
|
|
.gpio = E600GAC_V2_GPIO_LED_SYS,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "e600gac-v2:orange:wan",
|
|
.gpio = E600GAC_V2_GPIO_LED_WAN_O,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "e600gac-v2:green:lan",
|
|
.gpio = E600GAC_V2_GPIO_LED_LAN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "e600gac-v2:green:wan",
|
|
.gpio = E600GAC_V2_GPIO_LED_WAN_G,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button e600g_v2_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = E600G_V2_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = E600G_V2_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button e600gac_v2_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = E600G_V2_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = E600G_V2_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
}, {
|
|
.desc = "wps",
|
|
.type = EV_KEY,
|
|
.code = KEY_WPS_BUTTON,
|
|
.debounce_interval = E600G_V2_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = E600GAC_V2_GPIO_BTN_WPS,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static void __init e600g_v2_common_setup(void)
|
|
{
|
|
u8 *mac = (u8 *) KSEG1ADDR(0x1f050400);
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1f061000);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
ath79_setup_ar933x_phy4_switch(false, false);
|
|
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
ath79_switch_data.phy4_mii_en = 1;
|
|
ath79_switch_data.phy_poll_mask = 0xfe;
|
|
|
|
/* LAN */
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
|
ath79_eth0_data.phy_mask = BIT(4);
|
|
ath79_eth0_data.speed = SPEED_100;
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
|
|
ath79_register_eth(0);
|
|
|
|
/* WAN */
|
|
ath79_eth1_data.duplex = DUPLEX_FULL;
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
|
ath79_eth1_data.phy_mask = BIT(0);
|
|
ath79_eth1_data.speed = SPEED_1000;
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
|
|
ath79_register_eth(1);
|
|
|
|
ath79_register_pci();
|
|
ath79_register_usb();
|
|
ath79_register_wmac(art, NULL);
|
|
}
|
|
|
|
static void __init e600g_v2_setup(void)
|
|
{
|
|
e600g_v2_common_setup();
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(e600g_v2_leds_gpio),
|
|
e600g_v2_leds_gpio);
|
|
|
|
ath79_register_gpio_keys_polled(-1, E600G_V2_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(e600g_v2_gpio_keys),
|
|
e600g_v2_gpio_keys);
|
|
}
|
|
|
|
static void __init e600gac_v2_setup(void)
|
|
{
|
|
e600g_v2_common_setup();
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(e600gac_v2_leds_gpio),
|
|
e600gac_v2_leds_gpio);
|
|
|
|
ath79_register_gpio_keys_polled(-1, E600G_V2_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(e600gac_v2_gpio_keys),
|
|
e600gac_v2_gpio_keys);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_E600G_V2, "E600G-V2", "WHQX E600G v2",
|
|
e600g_v2_setup);
|
|
|
|
MIPS_MACHINE(ATH79_MACH_E600GAC_V2, "E600GAC-V2", "WHQX E600GAC v2",
|
|
e600gac_v2_setup);
|