mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
f5919b65d4
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
42 lines
1.4 KiB
Diff
42 lines
1.4 KiB
Diff
From 38c886fdba43a119c7a28655e30c11fc77cdf814 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Thu, 19 Jul 2018 13:07:39 +0100
|
|
Subject: [PATCH 361/454] overlays: Fix vc4-kms-kippah-7inch
|
|
|
|
Add a Params: to the README entry and move it into alphabetical order.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
|
|
---
|
|
arch/arm/boot/dts/overlays/README | 13 +++++++------
|
|
1 file changed, 7 insertions(+), 6 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -1965,6 +1965,13 @@ Params: cma-256 CMA is 2
|
|
cma-64 CMA is 64MB
|
|
|
|
|
|
+Name: vc4-kms-kippah-7inch
|
|
+Info: Enable the Adafruit DPI Kippah with the 7" Ontat panel attached.
|
|
+ Requires vc4-kms-v3d to be loaded.
|
|
+Load: dtoverlay=vc4-kms-kippah-7inch
|
|
+Params: <None>
|
|
+
|
|
+
|
|
Name: vc4-kms-v3d
|
|
Info: Enable Eric Anholt's DRM VC4 HDMI/HVS/V3D driver. Running startx or
|
|
booting to GUI while this overlay is in use will cause interesting
|
|
@@ -1977,12 +1984,6 @@ Params: cma-256 CMA is 2
|
|
cma-64 CMA is 64MB
|
|
|
|
|
|
-Name: vc4-kms-kippah-7inch
|
|
-Info: Enable the Adafruit DPI Kippah with the 7" Ontat panel attached.
|
|
- Requires vc4-kms-v3d to be loaded.
|
|
-Load: dtoverlay=vc4-kms-kippah-7inch
|
|
-
|
|
-
|
|
Name: vga666
|
|
Info: Overlay for the Fen Logic VGA666 board
|
|
This uses GPIOs 2-21 (so no I2C), and activates the output 2-3 seconds
|