mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
f5919b65d4
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
86 lines
2.1 KiB
Diff
86 lines
2.1 KiB
Diff
From 62da6ec26e4e73c553dfadcd962b583af9975a39 Mon Sep 17 00:00:00 2001
|
|
From: Eric Anholt <eric@anholt.net>
|
|
Date: Fri, 9 Mar 2018 13:20:21 -0800
|
|
Subject: [PATCH 352/454] overlays: Add an overlay for the Adafruit Kippah with
|
|
their 7" panel
|
|
|
|
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
---
|
|
arch/arm/boot/dts/overlays/Makefile | 1 +
|
|
arch/arm/boot/dts/overlays/README | 6 +++
|
|
.../overlays/vc4-kms-kippah-7inch-overlay.dts | 43 +++++++++++++++++++
|
|
3 files changed, 50 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts
|
|
|
|
--- a/arch/arm/boot/dts/overlays/Makefile
|
|
+++ b/arch/arm/boot/dts/overlays/Makefile
|
|
@@ -137,6 +137,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
|
|
upstream.dtbo \
|
|
upstream-aux-interrupt.dtbo \
|
|
vc4-fkms-v3d.dtbo \
|
|
+ vc4-kms-kippah-7inch.dtbo \
|
|
vc4-kms-v3d.dtbo \
|
|
vga666.dtbo \
|
|
w1-gpio.dtbo \
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -1977,6 +1977,12 @@ Params: cma-256 CMA is 2
|
|
cma-64 CMA is 64MB, 64MB-aligned
|
|
|
|
|
|
+Name: vc4-kms-kippah-7inch
|
|
+Info: Enable the Adafruit DPI Kippah with the 7" Ontat panel attached.
|
|
+ Requires vc4-kms-v3d to be loaded.
|
|
+Load: dtoverlay=vc4-kms-kippah-7inch
|
|
+
|
|
+
|
|
Name: vga666
|
|
Info: Overlay for the Fen Logic VGA666 board
|
|
This uses GPIOs 2-21 (so no I2C), and activates the output 2-3 seconds
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts
|
|
@@ -0,0 +1,43 @@
|
|
+/*
|
|
+ * vc4-kms-v3d-overlay.dts
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+#include <dt-bindings/pinctrl/bcm2835.h>
|
|
+
|
|
+/ {
|
|
+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
|
|
+
|
|
+ fragment@0 {
|
|
+ target-path = "/";
|
|
+ __overlay__ {
|
|
+ panel: panel {
|
|
+ compatible = "ontat,yx700wv03", "simple-panel";
|
|
+
|
|
+ port {
|
|
+ panel_in: endpoint {
|
|
+ remote-endpoint = <&dpi_out>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@1 {
|
|
+ target = <&dpi>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&dpi_18bit_gpio0>;
|
|
+
|
|
+ port {
|
|
+ dpi_out: endpoint@0 {
|
|
+ remote-endpoint = <&panel_in>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+};
|