mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 17:48:58 +00:00
dc7efaefb5
Hardware Highlights:
This patch adds support for Western Digital MyBook Live Series:
CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz)
32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory
Board: Apollo-3G - APM82181 Board, 1*SATA
DRAM: 256 MB (2x NT5TU64M16GG-AC)
FLASH: 512 kB (SST 39VF040)
Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610
WARNING: The serial port needs a TTL/RS-232 v3.3 level converter!
The MyBook Live Duo additionally features a 1x USB 2.0 host port
and can support a second hard-drive.
This target produces two images for a target.
1. ext4 image
The extracted/raw image can be directly installed on
the internal HDD via "dd if=img.ext4 of=/dev/sdX".
This can either be done in place with the stock MyBook Live
firmware via ssh. Or by removing the HDD and writing the image
with a different PC.
The the compressed images are useful for sysupgrade.
2. recovery.tar image for TFTP and Serial.
extract the recovery.tar to a TFTP server directory.
On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert:
# setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self
Where 192.168.1.254 is your TFTP server.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
96 lines
3.6 KiB
Diff
96 lines
3.6 KiB
Diff
From: Arnd Bergmann <arnd@arndb.de>
|
|
Subject: [PATCH v4] usb: dwc2: fix regression on big-endian PowerPC/ARM systems
|
|
Date: Fri, 13 May 2016 15:52:27 +0200
|
|
Message-Id: <1463147559-544140-1-git-send-email-arnd@arndb.de>
|
|
|
|
A patch that went into Linux-4.4 to fix big-endian mode on a Lantiq
|
|
MIPS system unfortunately broke big-endian operation on PowerPC
|
|
APM82181 as reported by Christian Lamparter, and likely other
|
|
systems.
|
|
|
|
It actually introduced multiple issues:
|
|
|
|
- it broke big-endian ARM kernels: any machine that was working
|
|
correctly with a little-endian kernel is no longer using byteswaps
|
|
on big-endian kernels, which clearly breaks them.
|
|
- On PowerPC the same thing must be true: if it was working before,
|
|
using big-endian kernels is now broken. Unlike ARM, 32-bit PowerPC
|
|
usually uses big-endian kernels, so they are likely all broken.
|
|
- The barrier for dwc2_writel is on the wrong side of the __raw_writel(),
|
|
so the MMIO no longer synchronizes with DMA operations.
|
|
- On architectures that require specific CPU instructions for MMIO
|
|
access, using the __raw_ variant may turn this into a pointer
|
|
dereference that does not have the same effect as the readl/writel.
|
|
|
|
This patch is a simple revert for all architectures other than MIPS,
|
|
in the hope that we can more easily backport it to fix the regression
|
|
on PowerPC and ARM systems without breaking the Lantiq system again.
|
|
|
|
We should follow this up with a more elaborate change to add runtime
|
|
detection of endianness, to make sure it also works on all other
|
|
combinations of architectures and implementations of the usb-dwc2
|
|
device. That patch however will be fairly large and not appropriate
|
|
for backports to stable kernels.
|
|
|
|
Felipe suggested a different approach, using an endianness switching
|
|
register to always put the device into LE mode, but unfortunately
|
|
the dwc2 hardware does not provide a generic way to do that. Also,
|
|
I see no practical way of addressing the problem more generally by
|
|
patching architecture specific code on MIPS.
|
|
|
|
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fixes: 95c8bc360944 ("usb: dwc2: Use platform endianness when accessing registers")
|
|
---
|
|
drivers/usb/dwc2/core.h | 27 +++++++++++++++++++++++++++
|
|
1 file changed, 27 insertions(+)
|
|
|
|
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
|
|
index 3c58d633ce80..dec0b21fc626 100644
|
|
--- a/drivers/usb/dwc2/core.h
|
|
+++ b/drivers/usb/dwc2/core.h
|
|
@@ -64,6 +64,17 @@
|
|
DWC2_TRACE_SCHEDULER_VB(pr_fmt("%s: SCH: " fmt), \
|
|
dev_name(hsotg->dev), ##__VA_ARGS__)
|
|
|
|
+#ifdef CONFIG_MIPS
|
|
+/*
|
|
+ * There are some MIPS machines that can run in either big-endian
|
|
+ * or little-endian mode and that use the dwc2 register without
|
|
+ * a byteswap in both ways.
|
|
+ * Unlike other architectures, MIPS apparently does not require a
|
|
+ * barrier before the __raw_writel() to synchronize with DMA but does
|
|
+ * require the barrier after the __raw_writel() to serialize a set of
|
|
+ * writes. This set of operations was added specifically for MIPS and
|
|
+ * should only be used there.
|
|
+ */
|
|
static inline u32 dwc2_readl(const void __iomem *addr)
|
|
{
|
|
u32 value = __raw_readl(addr);
|
|
@@ -90,6 +101,22 @@ static inline void dwc2_writel(u32 value, void __iomem *addr)
|
|
pr_info("INFO:: wrote %08x to %p\n", value, addr);
|
|
#endif
|
|
}
|
|
+#else
|
|
+/* Normal architectures just use readl/write */
|
|
+static inline u32 dwc2_readl(const void __iomem *addr)
|
|
+{
|
|
+ return readl(addr);
|
|
+}
|
|
+
|
|
+static inline void dwc2_writel(u32 value, void __iomem *addr)
|
|
+{
|
|
+ writel(value, addr);
|
|
+
|
|
+#ifdef DWC2_LOG_WRITES
|
|
+ pr_info("info:: wrote %08x to %p\n", value, addr);
|
|
+#endif
|
|
+}
|
|
+#endif
|
|
|
|
/* Maximum number of Endpoints/HostChannels */
|
|
#define MAX_EPS_CHANNELS 16
|
|
--
|
|
2.7.0
|
|
|
|
|