openwrt/target/linux/lantiq/dts/ARV452CQW.dts
Mathias Kresin 259fc1e778 lantiq: show xdsl line init status on shared dsl/internet led
On boards which don't have a distinct internet and dsl led, use the
shared LED to indicate the xdsl line state and any traffic that is
send/received via the netdev. This traffic doesn't necessarily need to
be internet traffic.

Rename the shared LED of existing configs to "dsl", to match the new
defaults. The configuration of the to be renamed LED is identical with
the new defaults.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-06-17 15:38:18 +02:00

237 lines
4.5 KiB
Plaintext

/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "ARV452CQW - Arcor 801";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_blue;
led-failsafe = &power_red;
led-running = &power_blue;
led-dsl = &dsl_blue;
led-usb = &usb;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x2000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 GPIO_ACTIVE_HIGH
&gpiomm 7 GPIO_ACTIVE_HIGH>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>;
read-only;
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x3d0000>;
};
boardconfig: partition@3f0000 {
label = "boardconfig";
reg = <0x3f0000 0x10000>;
read-only;
};
};
};
ath5k_eep {
compatible = "ath5k,eeprom";
ath,eep-flash = <&boardconfig 0x400>;
ath,mac-offset = <0x0>;
ath,eep-swap;
};
gpiomm: gpiomm@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10>;
#address-cells = <1>;
#size-cells = <1>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0x77f>;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu cs1";
lantiq,function = "ebu";
};
pci_in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,open-drain = <1>;
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <0>;
lantiq,output = <1>;
};
leds {
lantiq,pins = "io3", "io5", "io6", "io7", "io9";
lantiq,output = <1>;
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
};
etop@E180000 {
phy-mode = "rmii";
mtd-mac-address = <&boardconfig 0x16>;
};
pci@E105400 {
status = "okay";
lantiq,external-clock;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
/*
#define ARV452CPW_SWITCH_RESET 110
*/
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
wps {
label = "wps";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_blue: power0 {
label = "arv452cqw:blue:power";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
dsl_blue: dsl {
label = "arv452cqw:blue:dsl";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
isdn {
label = "arv452cqw:blue:isdn";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
power_red: power1 {
label = "arv452cqw:red:power";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
wps {
label = "arv452cqw:blue:wps";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
wps1 {
label = "arv452cqw:yellow:wps";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
fxs1 {
label = "arv452cqw:blue:telefon1";
gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
};
fxs2 {
label = "arv452cqw:blue:telefon2";
gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
};
wps2 {
label = "arv452cqw:red:wps";
gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
};
fxo {
label = "arv452cqw:blue:line";
gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
};
voice {
label = "arv452cqw:blue:sprache";
gpios = <&gpiomm 4 1>;
};
usb: usb {
label = "arv452cqw:blue:usb";
gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "arv452cqw:blue:wlan";
gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
};
/*
internet blue and internet red are missing
dsl2 and dsl3 are not referenced in manual
*/
dsl2 {
label = "arv452cqw:yellow:dsl";
gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
};
dsl3 {
label = "arv452cqw:red:dsl";
gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
};
};
};