mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
f038c0c18f
Drop redundant label with new LED color/function format declared. This was needed previously when the new format wasn't supported by leds.sh functions script. Now that is supported this property can be removed in favor of the new format. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
192 lines
3.6 KiB
Plaintext
192 lines
3.6 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
/ {
|
|
chosen {
|
|
stdout-path = "serial0:9600n8";
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x8000000>;
|
|
};
|
|
|
|
leds: leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led-0 {
|
|
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
|
|
color = <LED_COLOR_ID_AMBER>;
|
|
function = LED_FUNCTION_FAULT;
|
|
};
|
|
|
|
led-1 {
|
|
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
function-enumerator = <1>;
|
|
};
|
|
|
|
led-2 {
|
|
gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
function-enumerator = <2>;
|
|
};
|
|
|
|
led-3 {
|
|
gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
function-enumerator = <3>;
|
|
};
|
|
|
|
led-4 {
|
|
gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_INDICATOR;
|
|
function-enumerator = <4>;
|
|
};
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
led_mode {
|
|
label = "led-mode";
|
|
gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
|
|
linux,code = <BTN_0>;
|
|
};
|
|
};
|
|
|
|
gpio-restart {
|
|
compatible = "gpio-restart";
|
|
gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
i2c_gpio_0: i2c-gpio-0 {
|
|
compatible = "i2c-gpio";
|
|
i2c-gpio,delay-us = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
gpio1: gpio@20 {
|
|
compatible = "nxp,pca9555";
|
|
reg = <0x20>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio@75 {
|
|
compatible = "nxp,pca9539";
|
|
reg = <0x75>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
/*
|
|
* GPIO14 (IO1_6): Shift Register RESET (port LED)
|
|
* - Switch-M8eG PN28080K: 3x 74HC164
|
|
* - Switch-M16eG PN28160K: 4x 74HC164
|
|
* - Switch-M24eG PN28240K: 6x 74HC164
|
|
* - Switch-M48eG PN28480K: 12x 74HC164
|
|
*/
|
|
portled_sregister_reset {
|
|
gpio-hog;
|
|
gpios = <14 GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
line-name = "portled-sregister-reset";
|
|
};
|
|
};
|
|
};
|
|
|
|
i2c_gpio_1: i2c-gpio-1 {
|
|
compatible = "i2c-gpio";
|
|
i2c-gpio,delay-us = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
i2c_switch: i2c-switch@70 {
|
|
compatible = "nxp,pca9545";
|
|
reset-gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
|
|
reg = <0x70>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <10000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@80000 {
|
|
label = "u-boot-env";
|
|
reg = <0x80000 0x10000>;
|
|
};
|
|
|
|
partition@90000 {
|
|
label = "u-boot-env2";
|
|
reg = <0x90000 0x10000>;
|
|
};
|
|
|
|
partition@a0000 {
|
|
label = "sysinfo";
|
|
reg = <0xa0000 0x60000>;
|
|
read-only;
|
|
};
|
|
|
|
/*
|
|
* Filesystem area in stock firmware
|
|
* (0x100000-0x1DFFFFF)
|
|
*
|
|
* stock firmware images are required to pass
|
|
* the checking by the U-Boot, also for OpenWrt
|
|
*
|
|
* in OpenWrt:
|
|
* - 0x100000-0xDFFFFF (13M): stock images
|
|
* - 0xE00000-0x1DFFFFF(16M): OpenWrt image
|
|
*/
|
|
partition@100000 {
|
|
label = "fs_reserved";
|
|
reg = <0x100000 0xd00000>;
|
|
};
|
|
|
|
partition@e00000 {
|
|
compatible = "denx,uimage";
|
|
label = "firmware";
|
|
reg = <0xe00000 0x1000000>;
|
|
};
|
|
|
|
partition@1e00000 {
|
|
label = "vlog_data";
|
|
reg = <0x1e00000 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1f00000 {
|
|
label = "elog_data";
|
|
reg = <0x1f00000 0x100000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
};
|