ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-30 02:29:01 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
d73a66be61
openwrt/target/linux/bcm53xx/patches-5.15/036-v6.5-0001-ARM-dts-BCM5301X-Relicense-Rafa-s-code-to-the-GPL-2..patch
John Audia 8590531048 kernel: bump 5.15 to 5.15.123 
Manually rebased:
	bcm4908/patches-5.15/071-v6.1-0001-net-broadcom-bcm4908_enet-handle-EPROBE_DEFER-when-g.patch
	bcm53xx/patches-5.15/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
	ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch[*]

Removed upstreamed:
	backport-5.15/735-v6.5-net-bgmac-postpone-turning-IRQs-off-to-avoid-SoC-han.patch[1]
	backport-5.15/817-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch[2]
	pending-5.15/143-jffs2-reduce-stack-usage-in-jffs2_build_xattr_subsys.patch[3]
	pending-5.15/160-workqueue-fix-enum-type-for-gcc-13.patch[4]
	bcm53xx/patches-5.15/036-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch[5]
	bcm53xx/patches-5.15/036-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch[6]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=02474292a44205c1eb5a03634ead155a3c9134f4
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=86b93cbfe104e99fd3d25a49748b99fb88101573
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=79b9ab357b6f5675007f4c02ff8765cbd8dc06a2
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=d528faa9e828b9fc46dfb684a2a9fd8c2e860ed8
5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=5899bc4058e89d5110a23797ff94439c53b77c25
6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=95afd2c7c7d26087730dc938709e025a303e5499

Build system: x86/64
Build-tested: ramips/tplink_archer-a6-v3
Run-tested: ramips/tplink_archer-a6-v3

Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John Audia <therealgraysky@proton.me>
[rebased ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch ]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2023-07-30 18:02:47 +02:00

488 lines
10 KiB
Diff
Raw Blame History

From 915fac07f053418d0ab9075af64da2872ca8a7f8 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Date: Wed, 3 May 2023 14:16:10 +0200
Subject: [PATCH] =?UTF-8?q?ARM:=20dts:=20BCM5301X:=20Relicense=20Rafa?=
=?UTF-8?q?=C5=82's=20code=20to=20the=20GPL=202.0+=20/=20MIT?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
All BCM5301X device DTS files use dual licensing. Try the same for SoC.
Introduce a new .dtsi file with a proper SPDX tag.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230503121611.1629-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
MAINTAINERS | 1 +
arch/arm/boot/dts/bcm-ns.dtsi | 202 ++++++++++++++++++++++++++++++++
arch/arm/boot/dts/bcm5301x.dtsi | 192 +-----------------------------
3 files changed, 205 insertions(+), 190 deletions(-)
create mode 100644 arch/arm/boot/dts/bcm-ns.dtsi
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3579,6 +3579,7 @@ M: Rafał Miłecki <zajec5@gmail.com>
M: bcm-kernel-feedback-list@broadcom.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
+F: arch/arm/boot/dts/bcm-ns.dtsi
F: arch/arm/boot/dts/bcm470*
F: arch/arm/boot/dts/bcm5301*
F: arch/arm/boot/dts/bcm953012*
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-ns.dtsi
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/clock/bcm-nsp.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ axi@18000000 {
+ compatible = "brcm,bus-axi";
+ reg = <0x18000000 0x1000>;
+ ranges = <0x00000000 0x18000000 0x00100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chipcommon: chipcommon@0 {
+ reg = <0x00000000 0x1000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pcie0: pcie@12000 {
+ reg = <0x00012000 0x1000>;
+ };
+
+ pcie1: pcie@13000 {
+ reg = <0x00013000 0x1000>;
+ };
+
+ usb2: usb2@21000 {
+ reg = <0x00021000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ interrupt-parent = <&gic>;
+
+ ehci: usb@21000 {
+ #usb-cells = <0>;
+
+ compatible = "generic-ehci";
+ reg = <0x00021000 0x1000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb2_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ehci_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ ehci_port2: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
+ };
+
+ ohci: usb@22000 {
+ #usb-cells = <0>;
+
+ compatible = "generic-ohci";
+ reg = <0x00022000 0x1000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ohci_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ ohci_port2: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
+ };
+ };
+
+ usb3: usb3@23000 {
+ reg = <0x00023000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ interrupt-parent = <&gic>;
+
+ xhci: usb@23000 {
+ #usb-cells = <0>;
+
+ compatible = "generic-xhci";
+ reg = <0x00023000 0x1000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb3_phy>;
+ phy-names = "usb";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ xhci_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+ };
+ };
+ };
+
+ mdio: mdio@18003000 {
+ compatible = "brcm,iproc-mdio";
+ reg = <0x18003000 0x8>;
+ #size-cells = <0>;
+ #address-cells = <1>;
+ };
+
+ dmu-bus@1800c000 {
+ compatible = "simple-bus";
+ ranges = <0 0x1800c000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cru-bus@100 {
+ compatible = "brcm,ns-cru", "simple-mfd";
+ reg = <0x100 0x1a4>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ usb2_phy: phy@164 {
+ compatible = "brcm,ns-usb2-phy";
+ reg = <0x164 0x4>;
+ brcm,syscon-clkset = <&cru_clkset>;
+ clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+ clock-names = "phy-ref-clk";
+ #phy-cells = <0>;
+ };
+
+ cru_clkset: syscon@180 {
+ compatible = "brcm,cru-clkset", "syscon";
+ reg = <0x180 0x4>;
+ };
+
+ pinctrl: pinctrl@1c0 {
+ compatible = "brcm,bcm4708-pinmux";
+ reg = <0x1c0 0x24>;
+ reg-names = "cru_gpio_control";
+
+ spi-pins {
+ groups = "spi_grp";
+ function = "spi";
+ };
+
+ pinmux_i2c: i2c-pins {
+ groups = "i2c_grp";
+ function = "i2c";
+ };
+
+ pinmux_pwm: pwm-pins {
+ groups = "pwm0_grp", "pwm1_grp",
+ "pwm2_grp", "pwm3_grp";
+ function = "pwm";
+ };
+
+ pinmux_uart1: uart1-pins {
+ groups = "uart1_grp";
+ function = "uart1";
+ };
+ };
+
+ thermal: thermal@2c0 {
+ compatible = "brcm,ns-thermal";
+ reg = <0x2c0 0x10>;
+ #thermal-sensor-cells = <0>;
+ };
+ };
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ coefficients = <(-556) 418000>;
+ thermal-sensors = <&thermal>;
+
+ trips {
+ cpu-crit {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ };
+ };
+ };
+};
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -8,11 +8,7 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
-#include <dt-bindings/clock/bcm-nsp.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "bcm-ns.dtsi"
/ {
#address-cells = <1>;
@@ -149,12 +145,6 @@
};
axi@18000000 {
- compatible = "brcm,bus-axi";
- reg = <0x18000000 0x1000>;
- ranges = <0x00000000 0x18000000 0x00100000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
#interrupt-cells = <1>;
interrupt-map-mask = <0x000fffff 0xffff>;
interrupt-map =
@@ -228,108 +218,15 @@
<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- chipcommon: chipcommon@0 {
- reg = <0x00000000 0x1000>;
-
- gpio-controller;
- #gpio-cells = <2>;
+ chipcommon@0 {
interrupt-controller;
#interrupt-cells = <2>;
};
- pcie0: pcie@12000 {
- reg = <0x00012000 0x1000>;
- };
-
- pcie1: pcie@13000 {
- reg = <0x00013000 0x1000>;
- };
-
pcie2: pcie@14000 {
reg = <0x00014000 0x1000>;
};
- usb2: usb2@21000 {
- reg = <0x00021000 0x1000>;
-
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- interrupt-parent = <&gic>;
-
- ehci: usb@21000 {
- #usb-cells = <0>;
-
- compatible = "generic-ehci";
- reg = <0x00021000 0x1000>;
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usb2_phy>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- ehci_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- ehci_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
-
- ohci: usb@22000 {
- #usb-cells = <0>;
-
- compatible = "generic-ohci";
- reg = <0x00022000 0x1000>;
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- ohci_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- ohci_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- usb3: usb3@23000 {
- reg = <0x00023000 0x1000>;
-
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- interrupt-parent = <&gic>;
-
- xhci: usb@23000 {
- #usb-cells = <0>;
-
- compatible = "generic-xhci";
- reg = <0x00023000 0x1000>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usb3_phy>;
- phy-names = "usb";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- xhci_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
gmac0: ethernet@24000 {
reg = <0x24000 0x800>;
};
@@ -355,13 +252,6 @@
status = "disabled";
};
- mdio: mdio@18003000 {
- compatible = "brcm,iproc-mdio";
- reg = <0x18003000 0x8>;
- #size-cells = <0>;
- #address-cells = <1>;
- };
-
mdio-mux@18003000 {
compatible = "mdio-mux-mmioreg", "mdio-mux";
mdio-parent-bus = <&mdio>;
@@ -409,18 +299,7 @@
};
dmu-bus@1800c000 {
- compatible = "simple-bus";
- ranges = <0 0x1800c000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
cru-bus@100 {
- compatible = "brcm,ns-cru", "simple-mfd";
- reg = <0x100 0x1a4>;
- ranges;
- #address-cells = <1>;
- #size-cells = <1>;
-
lcpll0: clock-controller@100 {
#clock-cells = <1>;
compatible = "brcm,nsp-lcpll0";
@@ -440,53 +319,6 @@
"usbclk", "iprocfast",
"sata1", "sata2";
};
-
- usb2_phy: phy@164 {
- compatible = "brcm,ns-usb2-phy";
- reg = <0x164 0x4>;
- brcm,syscon-clkset = <&cru_clkset>;
- clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
- clock-names = "phy-ref-clk";
- #phy-cells = <0>;
- };
-
- cru_clkset: syscon@180 {
- compatible = "brcm,cru-clkset", "syscon";
- reg = <0x180 0x4>;
- };
-
- pinctrl: pinctrl@1c0 {
- compatible = "brcm,bcm4708-pinmux";
- reg = <0x1c0 0x24>;
- reg-names = "cru_gpio_control";
-
- spi-pins {
- groups = "spi_grp";
- function = "spi";
- };
-
- pinmux_i2c: i2c-pins {
- groups = "i2c_grp";
- function = "i2c";
- };
-
- pinmux_pwm: pwm-pins {
- groups = "pwm0_grp", "pwm1_grp",
- "pwm2_grp", "pwm3_grp";
- function = "pwm";
- };
-
- pinmux_uart1: uart1-pins {
- groups = "uart1_grp";
- function = "uart1";
- };
- };
-
- thermal: thermal@2c0 {
- compatible = "brcm,ns-thermal";
- reg = <0x2c0 0x10>;
- #thermal-sensor-cells = <0>;
- };
};
};
@@ -557,24 +389,4 @@
};
};
};
-
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <0>;
- polling-delay = <1000>;
- coefficients = <(-556) 418000>;
- thermal-sensors = <&thermal>;
-
- trips {
- cpu-crit {
- temperature = <125000>;
- hysteresis = <0>;
- type = "critical";
- };
- };
-
- cooling-maps {
- };
- };
- };
};
Reference in New Issue View Git Blame Copy Permalink