mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-03 12:34:19 +00:00
40530c8eb4
CPU: AR9342 SoC
RAM: 64 MB DDR2
Flash: 8 MB NOR SPI
Ports: 2x100 MBit (24V PoE in, 24V PoE out), AR8236 switch
WLAN: 2.4/5 GHz
UART: 1 UART
LEDs: Power, 2x Ethernet, 4x RSSI LEDs (orange, red, 2x green)
Buttons: Reset
Flashing instructions using recovery method over TFTP
1. Unplug the ethernet cable from the router.
2. Using paper clip press and hold the router's reset button. Make sure
you can feel it depressed by the paper clip. Do not release the button
until step 4.
3. While keeping the reset button pressed in, plug the ethernet cable
back into the AP. Keep the reset button depressed until you see the
device's LEDs flashing in upgrade mode (alternating LED1/LED3 and
LED2/LED4), this may take up to 25 seconds.
4. You may release the reset button, now the device should be in TFTP
transfer mode.
5. Set a static IP on your Computer's NIC. A static IP of 192.168.1.25/24
should work.
6. Plug the PoE injector's LAN cable directly to your computer.
7. Start tftp client and issue following commands:
tftp> binary
tftp> connect 192.168.1.20
tftp> put openwrt-ath79-generic-ubnt-nano-m-xw-squashfs-factory.bin
Tested-by: Joe Ayers <ae6xe@arrl.net>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
221 lines
5.9 KiB
Makefile
221 lines
5.9 KiB
Makefile
DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE UBNT_VERSION UBNT_REVISION
|
|
|
|
# On M (XW) devices the U-Boot as of version 1.1.4-s1039 doesn't like
|
|
# VERSION_DIST being on the place of major(?) version number, so we need to
|
|
# use some number.
|
|
UBNT_REVISION := $(VERSION_DIST)-$(REVISION)
|
|
|
|
# mkubntimage is using the kernel image direct
|
|
# routerboard creates partitions out of the ubnt header
|
|
define Build/mkubntimage
|
|
-$(STAGING_DIR_HOST)/bin/mkfwimage \
|
|
-B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
|
|
-k $(IMAGE_KERNEL) \
|
|
-r $@ \
|
|
-o $@
|
|
endef
|
|
|
|
# all UBNT XM/WA devices expect the kernel image to have 1024k while flash, when
|
|
# booting the image, the size doesn't matter.
|
|
define Build/mkubntimage-split
|
|
-[ -f $@ ] && ( \
|
|
dd if=$@ of=$@.old1 bs=1024k count=1; \
|
|
dd if=$@ of=$@.old2 bs=1024k skip=1; \
|
|
$(STAGING_DIR_HOST)/bin/mkfwimage \
|
|
-B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v$(UBNT_VERSION)-$(UBNT_REVISION) \
|
|
-k $@.old1 \
|
|
-r $@.old2 \
|
|
-o $@; \
|
|
rm $@.old1 $@.old2 )
|
|
endef
|
|
|
|
# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
|
|
# UBNT_TYPE e.g. one of (BZ, XM, XW)
|
|
# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
|
|
# UBNT_VERSION e.g. one of (6.0.0, 8.5.0)
|
|
define Device/ubnt
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
IMAGE_SIZE := 7552k
|
|
UBNT_BOARD := XM
|
|
UBNT_VERSION := 6.0.0
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | mkubntimage-split
|
|
endef
|
|
|
|
define Device/ubnt-xm
|
|
$(Device/ubnt)
|
|
DEVICE_PACKAGES += kmod-usb-ohci rssileds
|
|
UBNT_TYPE := XM
|
|
UBNT_CHIP := ar7240
|
|
ATH_SOC := ar7241
|
|
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma
|
|
endef
|
|
|
|
define Device/ubnt-bz
|
|
$(Device/ubnt)
|
|
UBNT_TYPE := BZ
|
|
UBNT_CHIP := ar7240
|
|
ATH_SOC := ar7241
|
|
endef
|
|
|
|
define Device/ubnt-wa
|
|
$(Device/ubnt)
|
|
UBNT_TYPE := WA
|
|
UBNT_CHIP := ar934x
|
|
UBNT_BOARD := WA
|
|
UBNT_VERSION := 8.5.0
|
|
ATH_SOC := ar9342
|
|
endef
|
|
|
|
define Device/ubnt-xw
|
|
$(Device/ubnt)
|
|
UBNT_TYPE := XW
|
|
UBNT_CHIP := ar934x
|
|
UBNT_BOARD := XM
|
|
UBNT_VERSION := 6.0.4
|
|
UBNT_REVISION := 42.$(UBNT_REVISION)
|
|
ATH_SOC := ar9342
|
|
endef
|
|
|
|
define Device/ubnt_airrouter
|
|
$(Device/ubnt-xm)
|
|
DEVICE_TITLE := Ubiquiti AirRouter
|
|
SUPPORTED_DEVICES += airrouter
|
|
endef
|
|
TARGET_DEVICES += ubnt_airrouter
|
|
|
|
define Device/ubnt_bullet-m
|
|
$(Device/ubnt-xm)
|
|
DEVICE_TITLE := Ubiquiti Bullet-M
|
|
SUPPORTED_DEVICES += bullet-m
|
|
endef
|
|
TARGET_DEVICES += ubnt_bullet-m
|
|
|
|
define Device/ubnt_bullet-m-xw
|
|
$(Device/ubnt-xw)
|
|
DEVICE_TITLE := Ubiquiti Bullet-M (XW)
|
|
SUPPORTED_DEVICES += bullet-m-xw
|
|
endef
|
|
TARGET_DEVICES += ubnt_bullet-m-xw
|
|
|
|
define Device/ubnt_rocket-m
|
|
$(Device/ubnt-xm)
|
|
DEVICE_TITLE := Ubiquiti Rocket-M
|
|
SUPPORTED_DEVICES += rocket-m
|
|
endef
|
|
TARGET_DEVICES += ubnt_rocket-m
|
|
|
|
define Device/ubnt_nano-m
|
|
$(Device/ubnt-xm)
|
|
DEVICE_TITLE := Ubiquiti Nano-M
|
|
SUPPORTED_DEVICES += nano-m
|
|
endef
|
|
TARGET_DEVICES += ubnt_nano-m
|
|
|
|
define Device/ubnt_nanostation-m-xw
|
|
$(Device/ubnt-xw)
|
|
DEVICE_TITLE := Ubiquiti Nanostation M (XW)
|
|
endef
|
|
TARGET_DEVICES += ubnt_nanostation-m-xw
|
|
|
|
define Device/ubnt_lap-120
|
|
$(Device/ubnt-wa)
|
|
DEVICE_TITLE := Ubiquiti LiteAP ac (LAP-120)
|
|
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15744k
|
|
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split
|
|
endef
|
|
TARGET_DEVICES += ubnt_lap-120
|
|
|
|
define Device/ubnt_nanostation-ac
|
|
$(Device/ubnt-wa)
|
|
DEVICE_TITLE := Ubiquiti Nanostation AC
|
|
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15744k
|
|
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split
|
|
endef
|
|
TARGET_DEVICES += ubnt_nanostation-ac
|
|
|
|
define Device/ubnt_nanostation-ac-loco
|
|
$(Device/ubnt-wa)
|
|
DEVICE_TITLE := Ubiquiti Nanostation AC loco
|
|
DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15744k
|
|
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split
|
|
endef
|
|
TARGET_DEVICES += ubnt_nanostation-ac-loco
|
|
|
|
define Device/ubnt_unifi
|
|
$(Device/ubnt-bz)
|
|
DEVICE_TITLE := Ubiquiti UniFi
|
|
SUPPORTED_DEVICES += unifi
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifi
|
|
|
|
define Device/ubnt_unifiac
|
|
ATH_SOC := qca9563
|
|
IMAGE_SIZE := 7744k
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
endef
|
|
|
|
|
|
define Device/ubnt_unifiac-lite
|
|
$(Device/ubnt_unifiac)
|
|
DEVICE_TITLE := Ubiquiti UniFi AC-Lite
|
|
SUPPORTED_DEVICES += ubnt-unifiac-lite
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifiac-lite
|
|
|
|
define Device/ubnt_unifiac-mesh
|
|
$(Device/ubnt_unifiac)
|
|
DEVICE_TITLE := Ubiquiti UniFi AC-Mesh
|
|
SUPPORTED_DEVICES += ubnt-unifiac-mesh
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifiac-mesh
|
|
|
|
define Device/ubnt_unifiac-mesh-pro
|
|
$(Device/ubnt_unifiac)
|
|
DEVICE_TITLE := Ubiquiti UniFi AC-Mesh Pro
|
|
SUPPORTED_DEVICES += ubnt-unifiac-mesh-pro
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifiac-mesh-pro
|
|
|
|
define Device/ubnt_unifiac-pro
|
|
$(Device/ubnt_unifiac)
|
|
DEVICE_TITLE := Ubiquiti UniFi AC-Pro
|
|
DEVICE_PACKAGES += kmod-usb-core kmod-usb2
|
|
SUPPORTED_DEVICES += ubnt-unifiac-pro
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifiac-pro
|
|
|
|
define Device/ubnt_routerstation_common
|
|
DEVICE_PACKAGES := -kmod-ath9k -wpad-mini -uboot-envtools kmod-usb-ohci kmod-usb2 fconfig
|
|
ATH_SOC := ar7161
|
|
IMAGE_SIZE := 16128k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE) | append-metadata
|
|
KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE)
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb
|
|
endef
|
|
|
|
define Device/ubnt_routerstation
|
|
$(Device/ubnt_routerstation_common)
|
|
DEVICE_TITLE := Ubiquiti RouterStation
|
|
UBNT_BOARD := RS
|
|
UBNT_TYPE := RSx
|
|
UBNT_CHIP := ar7100
|
|
DEVICE_PACKAGES += -swconfig
|
|
endef
|
|
TARGET_DEVICES += ubnt_routerstation
|
|
|
|
define Device/ubnt_routerstation-pro
|
|
$(Device/ubnt_routerstation_common)
|
|
DEVICE_TITLE := Ubiquiti RouterStation Pro
|
|
UBNT_BOARD := RSPRO
|
|
UBNT_TYPE := RSPRO
|
|
UBNT_CHIP := ar7100pro
|
|
endef
|
|
TARGET_DEVICES += ubnt_routerstation-pro
|