mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-13 00:10:21 +00:00
3774f3272e
The company Zyxel rebranded some years ago. Currently the casing is according to the old branding even for newer devices which already use the new branding. This commit aligns the casing of Zyxel everywhere. Signed-off-by: Goetz Goerisch <ggoerisch@gmail.com> Link: https://github.com/openwrt/openwrt/pull/15652 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
376 lines
6.3 KiB
Plaintext
376 lines
6.3 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
#include "mt7986a.dtsi"
|
|
|
|
/ {
|
|
model = "Zyxel EX5700 (Telenor)";
|
|
compatible = "zyxel,ex5700-telenor", "mediatek,mt7986a";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
ethernet0 = &gmac0;
|
|
led-boot = &led_status_green;
|
|
led-failsafe = &led_status_green;
|
|
led-running = &led_status_green;
|
|
led-upgrade = &led_status_amber;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
|
|
// Stock U-Boot crashes unless /chosen/bootargs exists
|
|
bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8";
|
|
};
|
|
|
|
memory {
|
|
reg = <0 0x40000000 0 0x40000000>;
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_5v: regulator-5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
poll-interval = <20>;
|
|
|
|
reset-button {
|
|
label = "reset";
|
|
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
|
|
wps-button {
|
|
label = "wps";
|
|
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
red1 {
|
|
label = "red:net";
|
|
gpios = <&pio 23 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
green1 {
|
|
label = "green:net";
|
|
gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
amber1 {
|
|
label = "amber:net";
|
|
gpios = <&pio 29 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
white2 {
|
|
function = LED_FUNCTION_STATUS;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
gpios = <&pio 16 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
red2 {
|
|
function = LED_FUNCTION_STATUS;
|
|
color = <LED_COLOR_ID_RED>;
|
|
gpios = <&pio 17 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led_status_green: green2 {
|
|
function = LED_FUNCTION_STATUS;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
gpios = <&pio 31 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led_status_amber: amber2 {
|
|
function = LED_FUNCTION_STATUS;
|
|
color = <LED_COLOR_ID_AMBER>;
|
|
gpios = <&pio 18 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
ð {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <ð_pins>;
|
|
|
|
gmac0: mac@0 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <0>;
|
|
phy-mode = "2500base-x";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
|
|
mac@1 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <1>;
|
|
label = "wan";
|
|
phy-mode = "2500base-x";
|
|
phy-handle = <&phy6>;
|
|
};
|
|
|
|
mdio: mdio-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
|
reset-delay-us = <50000>;
|
|
reset-post-delay-us = <20000>;
|
|
|
|
phy5: phy@5 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <5>;
|
|
};
|
|
|
|
phy6: phy@6 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <6>;
|
|
};
|
|
|
|
switch: switch@1f {
|
|
compatible = "mediatek,mt7531";
|
|
reg = <31>;
|
|
reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
&switch {
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "lan3";
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan2";
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan1";
|
|
};
|
|
|
|
port@5 {
|
|
reg = <5>;
|
|
label = "lan4";
|
|
phy-mode = "2500base-x";
|
|
phy-handle = <&phy5>;
|
|
};
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
ethernet = <&gmac0>;
|
|
phy-mode = "2500base-x";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&crypto {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie_pins>;
|
|
status = "okay";
|
|
|
|
pcie@0,0 {
|
|
reg = <0x0000 0 0 0 0>;
|
|
|
|
wifi@0,0 {
|
|
compatible = "mediatek,mt76";
|
|
reg = <0x0000 0 0 0 0>;
|
|
mediatek,mtd-eeprom = <&factory 0xa0000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&watchdog {
|
|
status = "okay";
|
|
};
|
|
|
|
&wifi {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wf_5g_pins>;
|
|
|
|
mediatek,mtd-eeprom = <&factory 0x0>;
|
|
};
|
|
|
|
&pio {
|
|
eth_pins: eth-pins {
|
|
mux {
|
|
function = "eth";
|
|
groups = "switch_int", "mdc_mdio";
|
|
};
|
|
};
|
|
|
|
pcie_pins: pcie-pins {
|
|
mux {
|
|
function = "pcie";
|
|
groups = "pcie_pereset"; // "pcie_clk" and "pcie_wake" is unused?
|
|
};
|
|
};
|
|
|
|
spi_flash_pins: spi-flash-pins-33-to-38 {
|
|
mux {
|
|
function = "spi";
|
|
groups = "spi0", "spi0_wp_hold";
|
|
};
|
|
conf-pu {
|
|
pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
|
|
drive-strength = <8>;
|
|
mediatek,pull-up-adv = <0>; /* bias-disable */
|
|
};
|
|
conf-pd {
|
|
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
|
|
drive-strength = <8>;
|
|
mediatek,pull-down-adv = <0>; /* bias-disable */
|
|
};
|
|
};
|
|
|
|
wf_5g_pins: wf_5g-pins {
|
|
mux {
|
|
function = "wifi";
|
|
groups = "wf_5g";
|
|
};
|
|
conf {
|
|
pins = "WF1_HB1", "WF1_HB2", "WF1_HB3", "WF1_HB4",
|
|
"WF1_HB0", "WF1_HB5", "WF1_HB6", "WF1_HB7",
|
|
"WF1_HB8", "WF1_TOP_CLK", "WF1_TOP_DATA";
|
|
drive-strength = <4>;
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
&spi0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi_flash_pins>;
|
|
cs-gpios = <0>, <0>;
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <20000000>;
|
|
};
|
|
|
|
flash@1 {
|
|
compatible = "spi-nand";
|
|
reg = <1>;
|
|
|
|
mediatek,nmbm;
|
|
mediatek,bmt-max-ratio = <1>;
|
|
mediatek,bmt-max-reserved-blocks = <64>;
|
|
|
|
spi-max-frequency = <20000000>;
|
|
spi-tx-bus-width = <4>;
|
|
spi-rx-bus-width = <4>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "BL2";
|
|
reg = <0x000000 0x100000>;
|
|
read-only;
|
|
};
|
|
partition@100000 {
|
|
label = "u-boot-env";
|
|
reg = <0x100000 0x80000>;
|
|
};
|
|
factory: partition@180000 {
|
|
label = "Factory";
|
|
reg = <0x180000 0x200000>;
|
|
read-only;
|
|
};
|
|
partition@380000 {
|
|
label = "FIP";
|
|
reg = <0x380000 0x200000>;
|
|
read-only;
|
|
};
|
|
partition@580000 {
|
|
label = "ubi";
|
|
reg = <0x580000 0x1da80000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&ssusb {
|
|
vusb33-supply = <®_3p3v>;
|
|
vbus-supply = <®_5v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&trng {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_phy {
|
|
status = "okay";
|
|
};
|