mirror of
https://github.com/openwrt/openwrt.git
synced 2025-02-21 01:41:41 +00:00
d6d06aceb0
This is a Japanese market router, for details check http://www.planex.co.jp/product/router/mzk-w300nh2/. It has only 16MB RAM, but base OpenWRT install worked fine for days without issues. Even an image with built-in Luci worked, but don't expect smooth experience, due to the lack of RAM. Wifi was not extensively tested, but seems it is working. GPIO LEDs & buttons, factory flash image and switch config are confirmed working. Tested against revision 34882 + this patch. [juhosg: move user-space support and image generation changes into separate patches] Signed-off-by: Samir Ibradžić <sibradzic@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/3077/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34925
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev and libc headers. Run "./scripts/feeds update" to get the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install" to install symlinks into "package/feeds/*". Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org