ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-27 01:11:14 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
d6939baac2
openwrt/target/linux/generic/pending-4.4/078-0004-net-phy-cherry-pick-Broadcom-drivers-updates-from-v4.patch
Rafał Miłecki 2cd32a3304 kernel: add fix for bgmac with B50212E B1 PHY 
This PHY requires some extra programming to work reliably with all
devices. Backport upstream fix for it.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-10-13 13:54:22 +02:00

284 lines
9.6 KiB
Diff
Raw Blame History

From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
Subject: [PATCH] net: phy: cherry-pick Broadcom drivers updates from v4.11
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This includes following upstream commits:
62e13097c46c net: phy: broadcom: rehook BCM54612E specific init
0fc9ae107669 net: phy: broadcom: add support for BCM54210E
5e7bfa6cb0a9 net: phy: bcm-phy-lib: clean up remaining AUXCTL register defines
8293c7bcdef1 net: phy: broadcom: drop duplicated define for RGMII SKEW delay
85b4685da52f net: phy: broadcom: use auxctl reading helper in BCM54612E code
039a7b8592ab net: phy: bcm7xxx: Implement EGPHY workaround for 7278
582d0ac397ca net: phy: bcm7xxx: Add entry for BCM7278
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -163,12 +163,43 @@ static int bcm7xxx_28nm_e0_plus_afe_conf
return 0;
}
+static int bcm7xxx_28nm_a0_patch_afe_config_init(struct phy_device *phydev)
+{
+ /* +1 RC_CAL codes for RL centering for both LT and HT conditions */
+ bcm_phy_write_misc(phydev, AFE_RXCONFIG_2, 0xd003);
+
+ /* Cut master bias current by 2% to compensate for RC_CAL offset */
+ bcm_phy_write_misc(phydev, DSP_TAP10, 0x791b);
+
+ /* Improve hybrid leakage */
+ bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x10e3);
+
+ /* Change rx_on_tune 8 to 0xf */
+ bcm_phy_write_misc(phydev, 0x21, 0x2, 0x87f6);
+
+ /* Change 100Tx EEE bandwidth */
+ bcm_phy_write_misc(phydev, 0x22, 0x2, 0x017d);
+
+ /* Enable ffe zero detection for Vitesse interoperability */
+ bcm_phy_write_misc(phydev, 0x26, 0x2, 0x0015);
+
+ r_rc_cal_reset(phydev);
+
+ return 0;
+}
+
static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
{
u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags);
u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags);
int ret = 0;
+ /* Newer devices have moved the revision information back into a
+ * standard location in MII_PHYS_ID[23]
+ */
+ if (rev == 0)
+ rev = phydev->phy_id & ~phydev->drv->phy_id_mask;
+
pr_info_once("%s: %s PHY revision: 0x%02x, patch: %d\n",
dev_name(&phydev->dev), phydev->drv->name, rev, patch);
@@ -192,6 +223,9 @@ static int bcm7xxx_28nm_config_init(stru
case 0x10:
ret = bcm7xxx_28nm_e0_plus_afe_config_init(phydev);
break;
+ case 0x01:
+ ret = bcm7xxx_28nm_a0_patch_afe_config_init(phydev);
+ break;
default:
break;
}
@@ -336,6 +370,7 @@ static int bcm7xxx_suspend(struct phy_de
static struct phy_driver bcm7xxx_driver[] = {
BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7278, "Broadcom BCM7278"),
BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"),
BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"),
BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"),
@@ -350,6 +385,7 @@ static struct phy_driver bcm7xxx_driver[
static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
{ PHY_ID_BCM7250, 0xfffffff0, },
+ { PHY_ID_BCM7278, 0xfffffff0, },
{ PHY_ID_BCM7364, 0xfffffff0, },
{ PHY_ID_BCM7366, 0xfffffff0, },
{ PHY_ID_BCM7346, 0xfffffff0, },
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -30,6 +30,50 @@ MODULE_DESCRIPTION("Broadcom PHY driver"
MODULE_AUTHOR("Maciej W. Rozycki");
MODULE_LICENSE("GPL");
+static int bcm54210e_config_init(struct phy_device *phydev)
+{
+ int val;
+
+ val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+ val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
+ val |= MII_BCM54XX_AUXCTL_MISC_WREN;
+ bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, val);
+
+ val = bcm_phy_read_shadow(phydev, BCM54810_SHD_CLK_CTL);
+ val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN;
+ bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val);
+
+ return 0;
+}
+
+static int bcm54612e_config_init(struct phy_device *phydev)
+{
+ /* Clear TX internal delay unless requested. */
+ if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
+ (phydev->interface != PHY_INTERFACE_MODE_RGMII_TXID)) {
+ /* Disable TXD to GTXCLK clock delay (default set) */
+ /* Bit 9 is the only field in shadow register 00011 */
+ bcm_phy_write_shadow(phydev, 0x03, 0);
+ }
+
+ /* Clear RX internal delay unless requested. */
+ if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
+ (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) {
+ u16 reg;
+
+ reg = bcm54xx_auxctl_read(phydev,
+ MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+ /* Disable RXD to RXC delay (default set) */
+ reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
+ /* Clear shadow selector field */
+ reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MASK;
+ bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
+ MII_BCM54XX_AUXCTL_MISC_WREN | reg);
+ }
+
+ return 0;
+}
+
static int bcm54810_config(struct phy_device *phydev)
{
int rc, val;
@@ -230,7 +274,15 @@ static int bcm54xx_config_init(struct ph
(phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
bcm54xx_adjust_rxrefclk(phydev);
- if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810) {
+ if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54210E) {
+ err = bcm54210e_config_init(phydev);
+ if (err)
+ return err;
+ } else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54612E) {
+ err = bcm54612e_config_init(phydev);
+ if (err)
+ return err;
+ } else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810) {
err = bcm54810_config(phydev);
if (err)
return err;
@@ -375,41 +427,6 @@ static int bcm5481_config_aneg(struct ph
return ret;
}
-static int bcm54612e_config_aneg(struct phy_device *phydev)
-{
- int ret;
-
- /* First, auto-negotiate. */
- ret = genphy_config_aneg(phydev);
-
- /* Clear TX internal delay unless requested. */
- if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
- (phydev->interface != PHY_INTERFACE_MODE_RGMII_TXID)) {
- /* Disable TXD to GTXCLK clock delay (default set) */
- /* Bit 9 is the only field in shadow register 00011 */
- bcm_phy_write_shadow(phydev, 0x03, 0);
- }
-
- /* Clear RX internal delay unless requested. */
- if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
- (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) {
- u16 reg;
-
- /* Errata: reads require filling in the write selector field */
- bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
- MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC);
- reg = phy_read(phydev, MII_BCM54XX_AUX_CTL);
- /* Disable RXD to RXC delay (default set) */
- reg &= ~MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW;
- /* Clear shadow selector field */
- reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MASK;
- bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
- MII_BCM54XX_AUXCTL_MISC_WREN | reg);
- }
-
- return ret;
-}
-
static int brcm_phy_setbits(struct phy_device *phydev, int reg, int set)
{
int val;
@@ -548,6 +565,19 @@ static struct phy_driver broadcom_driver
.config_intr = bcm_phy_config_intr,
.driver = { .owner = THIS_MODULE },
}, {
+ .phy_id = PHY_ID_BCM54210E,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM54210E",
+ .features = PHY_GBIT_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+ .config_init = bcm54xx_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .ack_interrupt = bcm_phy_ack_intr,
+ .config_intr = bcm_phy_config_intr,
+ .driver = { .owner = THIS_MODULE },
+}, {
.phy_id = PHY_ID_BCM5461,
.phy_id_mask = 0xfffffff0,
.name = "Broadcom BCM5461",
@@ -568,7 +598,7 @@ static struct phy_driver broadcom_driver
SUPPORTED_Pause | SUPPORTED_Asym_Pause,
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
.config_init = bcm54xx_config_init,
- .config_aneg = bcm54612e_config_aneg,
+ .config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = bcm_phy_ack_intr,
.config_intr = bcm_phy_config_intr,
@@ -708,6 +738,7 @@ module_phy_driver(broadcom_drivers);
static struct mdio_device_id __maybe_unused broadcom_tbl[] = {
{ PHY_ID_BCM5411, 0xfffffff0 },
{ PHY_ID_BCM5421, 0xfffffff0 },
+ { PHY_ID_BCM54210E, 0xfffffff0 },
{ PHY_ID_BCM5461, 0xfffffff0 },
{ PHY_ID_BCM54612E, 0xfffffff0 },
{ PHY_ID_BCM54616S, 0xfffffff0 },
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -17,6 +17,7 @@
#define PHY_ID_BCM5482 0x0143bcb0
#define PHY_ID_BCM5411 0x00206070
#define PHY_ID_BCM5421 0x002060e0
+#define PHY_ID_BCM54210E 0x600d84a0
#define PHY_ID_BCM5464 0x002060b0
#define PHY_ID_BCM5461 0x002060c0
#define PHY_ID_BCM54612E 0x03625e60
@@ -24,6 +25,7 @@
#define PHY_ID_BCM57780 0x03625d90
#define PHY_ID_BCM7250 0xae025280
+#define PHY_ID_BCM7278 0xae0251a0
#define PHY_ID_BCM7364 0xae025260
#define PHY_ID_BCM7366 0x600d8490
#define PHY_ID_BCM7346 0x600d8650
@@ -103,18 +105,17 @@
/*
* AUXILIARY CONTROL SHADOW ACCESS REGISTERS. (PHY REG 0x18)
*/
-#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000
+#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x00
#define MII_BCM54XX_AUXCTL_ACTL_TX_6DB 0x0400
#define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA 0x0800
-#define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000
-#define MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW 0x0100
-#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200
-#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC 0x7000
-#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x0007
-#define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT 12
-#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN (1 << 8)
+#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x07
+#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN 0x0010
+#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN 0x0100
+#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200
+#define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000
+#define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT 12
#define MII_BCM54XX_AUXCTL_SHDWSEL_MASK 0x0007
/*
Reference in New Issue View Git Blame Copy Permalink