mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 06:57:57 +00:00
162 lines
4.4 KiB
Diff
162 lines
4.4 KiB
Diff
--- a/drivers/serial/atmel_serial.c
|
|
+++ b/drivers/serial/atmel_serial.c
|
|
@@ -214,6 +214,34 @@ static void atmel_set_mctrl(struct uart_
|
|
at91_set_gpio_value(AT91_PIN_PA21, 0);
|
|
else
|
|
at91_set_gpio_value(AT91_PIN_PA21, 1);
|
|
+
|
|
+ /*
|
|
+ * FDL VersaLink adds GPIOS to provide full modem
|
|
+ * control on USART 0 - Drive DTR and RI pins manually
|
|
+ */
|
|
+ if (mctrl & TIOCM_DTR)
|
|
+ at91_set_gpio_value(AT91_PIN_PB6, 0);
|
|
+ else
|
|
+ at91_set_gpio_value(AT91_PIN_PB6, 1);
|
|
+ if (mctrl & TIOCM_RI)
|
|
+ at91_set_gpio_value(AT91_PIN_PB7, 0);
|
|
+ else
|
|
+ at91_set_gpio_value(AT91_PIN_PB7, 1);
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * FDL VersaLink adds GPIOS to provide full modem control on
|
|
+ * USART 3 - Drive DTR and RI pins manually
|
|
+ */
|
|
+ if (port->mapbase == AT91RM9200_BASE_US3) {
|
|
+ if (mctrl & TIOCM_DTR)
|
|
+ at91_set_gpio_value(AT91_PIN_PB29, 0);
|
|
+ else
|
|
+ at91_set_gpio_value(AT91_PIN_PB29, 1);
|
|
+ if (mctrl & TIOCM_RI)
|
|
+ at91_set_gpio_value(AT91_PIN_PB2, 0);
|
|
+ else
|
|
+ at91_set_gpio_value(AT91_PIN_PB2, 1);
|
|
}
|
|
}
|
|
#endif
|
|
@@ -251,8 +279,10 @@ static u_int atmel_get_mctrl(struct uart
|
|
/*
|
|
* The control signals are active low.
|
|
*/
|
|
- if (!(status & ATMEL_US_DCD))
|
|
- ret |= TIOCM_CD;
|
|
+
|
|
+ if (!(port->mapbase == AT91RM9200_BASE_US0 || port->mapbase == AT91RM9200_BASE_US3))
|
|
+ if (!(status & ATMEL_US_DCD))
|
|
+ ret |= TIOCM_CD;
|
|
if (!(status & ATMEL_US_CTS))
|
|
ret |= TIOCM_CTS;
|
|
if (!(status & ATMEL_US_DSR))
|
|
@@ -260,6 +290,16 @@ static u_int atmel_get_mctrl(struct uart
|
|
if (!(status & ATMEL_US_RI))
|
|
ret |= TIOCM_RI;
|
|
|
|
+ /*
|
|
+ * Read the GPIO's for the FDL VersaLink special case
|
|
+ */
|
|
+ if (port->mapbase == AT91RM9200_BASE_US0)
|
|
+ if (!(at91_get_gpio_value(AT91_PIN_PA19)))
|
|
+ ret |= TIOCM_CD;
|
|
+ if (port->mapbase == AT91RM9200_BASE_US3)
|
|
+ if (!(at91_get_gpio_value(AT91_PIN_PA24)))
|
|
+ ret |= TIOCM_CD;
|
|
+
|
|
return ret;
|
|
}
|
|
|
|
@@ -453,6 +493,34 @@ static void atmel_tx_chars(struct uart_p
|
|
}
|
|
|
|
/*
|
|
+ * USART0 DCD Interrupt handler
|
|
+ */
|
|
+
|
|
+static irqreturn_t atmel_u0_DCD_interrupt(int irq, void *dev_id)
|
|
+{
|
|
+ struct uart_port *port = dev_id;
|
|
+ int status = at91_get_gpio_value(irq);
|
|
+
|
|
+ uart_handle_dcd_change(port, !(status));
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+/*
|
|
+ * USART3 DCD Interrupt handler
|
|
+ */
|
|
+
|
|
+static irqreturn_t atmel_u3_DCD_interrupt(int irq, void *dev_id)
|
|
+{
|
|
+ struct uart_port *port = dev_id;
|
|
+ int status = at91_get_gpio_value(irq);
|
|
+
|
|
+ uart_handle_dcd_change(port, !(status));
|
|
+
|
|
+ return IRQ_HANDLED;
|
|
+}
|
|
+
|
|
+/*
|
|
* receive interrupt handler.
|
|
*/
|
|
static void
|
|
@@ -815,6 +883,23 @@ static int atmel_startup(struct uart_por
|
|
return retval;
|
|
}
|
|
|
|
+ if (port->mapbase == AT91RM9200_BASE_US0) {
|
|
+ retval = request_irq(AT91_PIN_PA19, atmel_u0_DCD_interrupt, 0, "atmel_serial", port);
|
|
+ if (retval) {
|
|
+ printk("atmel_serial: atmel_startup - Can't get u0DCD irq\n");
|
|
+ free_irq(port->irq, port);
|
|
+ return retval;
|
|
+ }
|
|
+ }
|
|
+ if (port->mapbase == AT91RM9200_BASE_US3) {
|
|
+ retval = request_irq(AT91_PIN_PA24, atmel_u3_DCD_interrupt, 0, "atmel_serial", port);
|
|
+ if (retval) {
|
|
+ printk("atmel_serial: atmel_startup - Can't get u3DCD irq\n");
|
|
+ free_irq(port->irq, port);
|
|
+ return retval;
|
|
+ }
|
|
+ }
|
|
+
|
|
/*
|
|
* Initialize DMA (if necessary)
|
|
*/
|
|
@@ -834,6 +919,10 @@ static int atmel_startup(struct uart_por
|
|
kfree(atmel_port->pdc_rx[0].buf);
|
|
}
|
|
free_irq(port->irq, port);
|
|
+ if (port->mapbase == AT91RM9200_BASE_US0)
|
|
+ free_irq(AT91_PIN_PA19, port);
|
|
+ if (port->mapbase == AT91RM9200_BASE_US3)
|
|
+ free_irq(AT91_PIN_PA24, port);
|
|
return -ENOMEM;
|
|
}
|
|
pdc->dma_addr = dma_map_single(port->dev,
|
|
@@ -873,7 +962,11 @@ static int atmel_startup(struct uart_por
|
|
retval = atmel_open_hook(port);
|
|
if (retval) {
|
|
free_irq(port->irq, port);
|
|
- return retval;
|
|
+ if (port->mapbase == AT91RM9200_BASE_US0)
|
|
+ free_irq(AT91_PIN_PA19, port);
|
|
+ if (port->mapbase == AT91RM9200_BASE_US3)
|
|
+ free_irq(AT91_PIN_PA24, port);
|
|
+ return retval;
|
|
}
|
|
}
|
|
|
|
@@ -947,6 +1040,10 @@ static void atmel_shutdown(struct uart_p
|
|
* Free the interrupt
|
|
*/
|
|
free_irq(port->irq, port);
|
|
+ if (port->mapbase == AT91RM9200_BASE_US0)
|
|
+ free_irq(AT91_PIN_PA19, port);
|
|
+ if (port->mapbase == AT91RM9200_BASE_US3)
|
|
+ free_irq(AT91_PIN_PA24, port);
|
|
|
|
/*
|
|
* If there is a specific "close" function (to unregister
|