openwrt/target/linux/bcm27xx/patches-6.6/950-1197-sound-soc-dwc-i2s-choose-FIFO-thresholds-based-on-DM.patch
Álvaro Fernández Rojas 0171157d45 bcm27xx: update to latest RPi patches
The patches were generated from the RPi repo with the following command:
git format-patch v6.6.44..rpi-6.6.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-08-06 18:38:00 +02:00

100 lines
3.7 KiB
Diff

From b6b4260fa546d1dc7421c7cfed059052dae04227 Mon Sep 17 00:00:00 2001
From: Jonathan Bell <jonathan@raspberrypi.com>
Date: Thu, 18 Jul 2024 09:40:03 +0100
Subject: [PATCH 1197/1215] sound/soc: dwc-i2s: choose FIFO thresholds based on
DMA burst constraints
Valid ranges for the I2S peripheral's FIFO configuration include a depth
of 16 - unconditionally setting the burst length to 16 with a fifo
threshold of size/2 will cause under/overflows.
For DMA engines with restricted capabilities the requested burst length
and FIFO thresholds need to be adjusted downward accordingly.
Both the RX and TX FIFOs operate on "less-than" thresholds. Setting the
TX threshold to fifo_size minus burst means the FIFO is kept nearly-full.
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
---
sound/soc/dwc/dwc-i2s.c | 21 ++++++++++++++++-----
sound/soc/dwc/local.h | 1 +
2 files changed, 17 insertions(+), 5 deletions(-)
--- a/sound/soc/dwc/dwc-i2s.c
+++ b/sound/soc/dwc/dwc-i2s.c
@@ -236,6 +236,8 @@ static void dw_i2s_config(struct dw_i2s_
u32 ch_reg;
struct i2s_clk_config_data *config = &dev->config;
u32 dmacr;
+ u32 comp1 = i2s_read_reg(dev->i2s_base, dev->i2s_reg_comp1);
+ u32 fifo_depth = 1 << (1 + COMP1_FIFO_DEPTH_GLOBAL(comp1));
i2s_disable_channels(dev, stream);
@@ -251,7 +253,7 @@ static void dw_i2s_config(struct dw_i2s_
i2s_write_reg(dev->i2s_base, TCR(ch_reg),
dev->xfer_resolution);
i2s_write_reg(dev->i2s_base, TFCR(ch_reg),
- dev->fifo_th - 1);
+ fifo_depth - dev->fifo_th - 1);
i2s_write_reg(dev->i2s_base, TER(ch_reg), TER_TXCHEN |
dev->tdm_mask << TER_TXSLOT_SHIFT);
dmacr |= (DMACR_DMAEN_TXCH0 << ch_reg);
@@ -783,8 +785,8 @@ static int dw_configure_dai_by_pd(struct
dev->capture_dma_data.pd.data = pdata->capture_dma_data;
dev->play_dma_data.pd.addr = res->start + I2S_TXDMA;
dev->capture_dma_data.pd.addr = res->start + I2S_RXDMA;
- dev->play_dma_data.pd.max_burst = 16;
- dev->capture_dma_data.pd.max_burst = 16;
+ dev->play_dma_data.pd.max_burst = dev->fifo_th;
+ dev->capture_dma_data.pd.max_burst = dev->fifo_th;
dev->play_dma_data.pd.addr_width = bus_widths[idx];
dev->capture_dma_data.pd.addr_width = bus_widths[idx];
dev->play_dma_data.pd.filter = pdata->filter;
@@ -815,7 +817,10 @@ static int dw_configure_dai_by_dt(struct
dev->play_dma_data.dt.addr = res->start + I2S_TXDMA;
dev->play_dma_data.dt.fifo_size = fifo_depth *
(fifo_width[idx2]) >> 8;
- dev->play_dma_data.dt.maxburst = 16;
+ if (dev->max_dma_burst)
+ dev->play_dma_data.dt.maxburst = dev->max_dma_burst;
+ else
+ dev->play_dma_data.dt.maxburst = fifo_depth / 2;
}
if (COMP1_RX_ENABLED(comp1)) {
idx2 = COMP2_RX_WORDSIZE_0(comp2);
@@ -824,9 +829,14 @@ static int dw_configure_dai_by_dt(struct
dev->capture_dma_data.dt.addr = res->start + I2S_RXDMA;
dev->capture_dma_data.dt.fifo_size = fifo_depth *
(fifo_width[idx2] >> 8);
- dev->capture_dma_data.dt.maxburst = 16;
+ if (dev->max_dma_burst)
+ dev->capture_dma_data.dt.maxburst = dev->max_dma_burst;
+ else
+ dev->capture_dma_data.dt.maxburst = fifo_depth / 2;
}
+ if (dev->max_dma_burst)
+ dev->fifo_th = min(dev->max_dma_burst, dev->fifo_th);
return 0;
}
@@ -1070,6 +1080,7 @@ static int dw_i2s_probe(struct platform_
}
}
+ of_property_read_u32(pdev->dev.of_node, "dma-maxburst", &dev->max_dma_burst);
dev->bclk_ratio = 0;
dev->i2s_reg_comp1 = I2S_COMP_PARAM_1;
dev->i2s_reg_comp2 = I2S_COMP_PARAM_2;
--- a/sound/soc/dwc/local.h
+++ b/sound/soc/dwc/local.h
@@ -133,6 +133,7 @@ struct dw_i2s_dev {
u32 ccr;
u32 xfer_resolution;
u32 fifo_th;
+ u32 max_dma_burst;
u32 l_reg;
u32 r_reg;
bool is_jh7110; /* Flag for StarFive JH7110 SoC */