mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 13:48:06 +00:00
8c405cdccc
The patches were generated from the RPi repo with the following command: git format-patch v6.6.34..rpi-6.1.y Some patches needed rebasing and, as usual, the applied and reverted, wireless drivers, Github workflows, READMEs and defconfigs patches were removed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
97 lines
3.2 KiB
Diff
97 lines
3.2 KiB
Diff
From aeba5dbed3c88a4408b66c93d30d67043b303332 Mon Sep 17 00:00:00 2001
|
|
From: Naushir Patuck <naush@raspberrypi.com>
|
|
Date: Wed, 8 Nov 2023 10:05:05 +0000
|
|
Subject: [PATCH 0723/1085] drivers: media: cfe: Don't confuse MHz and Mbps
|
|
|
|
The driver was interchaning these units when talking about link rate.
|
|
Fix this to avoid confusion. Apart from the logging message change,
|
|
there is no function change in this commit.
|
|
|
|
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
---
|
|
drivers/media/platform/raspberrypi/rp1_cfe/cfe.c | 8 ++++----
|
|
drivers/media/platform/raspberrypi/rp1_cfe/dphy.c | 10 +++++-----
|
|
drivers/media/platform/raspberrypi/rp1_cfe/dphy.h | 2 +-
|
|
3 files changed, 10 insertions(+), 10 deletions(-)
|
|
|
|
--- a/drivers/media/platform/raspberrypi/rp1_cfe/cfe.c
|
|
+++ b/drivers/media/platform/raspberrypi/rp1_cfe/cfe.c
|
|
@@ -983,7 +983,7 @@ static void cfe_buffer_queue(struct vb2_
|
|
spin_unlock_irqrestore(&cfe->state_lock, flags);
|
|
}
|
|
|
|
-static u64 sensor_link_frequency(struct cfe_device *cfe)
|
|
+static u64 sensor_link_rate(struct cfe_device *cfe)
|
|
{
|
|
struct v4l2_mbus_framefmt *source_fmt;
|
|
struct v4l2_subdev_state *state;
|
|
@@ -1028,11 +1028,11 @@ static u64 sensor_link_frequency(struct
|
|
|
|
/* x2 for DDR. */
|
|
link_freq *= 2;
|
|
- cfe_info("Using a link frequency of %lld Hz\n", link_freq);
|
|
+ cfe_info("Using a link rate of %lld Mbps\n", link_freq / (1000 * 1000));
|
|
return link_freq;
|
|
|
|
err:
|
|
- cfe_err("Unable to determine sensor link frequency, using 999 MHz\n");
|
|
+ cfe_err("Unable to determine sensor link rate, using 999 Mbps\n");
|
|
return 999 * 1000000UL;
|
|
}
|
|
|
|
@@ -1104,7 +1104,7 @@ static int cfe_start_streaming(struct vb
|
|
}
|
|
|
|
cfe_dbg("Configuring CSI-2 block\n");
|
|
- cfe->csi2.dphy.dphy_freq = sensor_link_frequency(cfe) / 1000000UL;
|
|
+ cfe->csi2.dphy.dphy_rate = sensor_link_rate(cfe) / 1000000UL;
|
|
csi2_open_rx(&cfe->csi2);
|
|
|
|
cfe_dbg("Starting sensor streaming\n");
|
|
--- a/drivers/media/platform/raspberrypi/rp1_cfe/dphy.c
|
|
+++ b/drivers/media/platform/raspberrypi/rp1_cfe/dphy.c
|
|
@@ -96,7 +96,7 @@ static uint8_t dphy_transaction(struct d
|
|
return get_tstdout(dphy);
|
|
}
|
|
|
|
-static void dphy_set_hsfreqrange(struct dphy_data *dphy, uint32_t freq_mhz)
|
|
+static void dphy_set_hsfreqrange(struct dphy_data *dphy, uint32_t mbps)
|
|
{
|
|
/* See Table 5-1 on page 65 of dphy databook */
|
|
static const u16 hsfreqrange_table[][2] = {
|
|
@@ -116,11 +116,11 @@ static void dphy_set_hsfreqrange(struct
|
|
};
|
|
unsigned int i;
|
|
|
|
- if (freq_mhz < 80 || freq_mhz > 1500)
|
|
- dphy_err("DPHY: Frequency %u MHz out of range\n", freq_mhz);
|
|
+ if (mbps < 80 || mbps > 1500)
|
|
+ dphy_err("DPHY: Datarate %u Mbps out of range\n", mbps);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(hsfreqrange_table) - 1; i++) {
|
|
- if (freq_mhz <= hsfreqrange_table[i][0])
|
|
+ if (mbps <= hsfreqrange_table[i][0])
|
|
break;
|
|
}
|
|
|
|
@@ -139,7 +139,7 @@ static void dphy_init(struct dphy_data *
|
|
set_tstclr(dphy, 0);
|
|
usleep_range(15, 20);
|
|
|
|
- dphy_set_hsfreqrange(dphy, dphy->dphy_freq);
|
|
+ dphy_set_hsfreqrange(dphy, dphy->dphy_rate);
|
|
|
|
usleep_range(5, 10);
|
|
dw_csi2_host_write(dphy, PHY_SHUTDOWNZ, 1);
|
|
--- a/drivers/media/platform/raspberrypi/rp1_cfe/dphy.h
|
|
+++ b/drivers/media/platform/raspberrypi/rp1_cfe/dphy.h
|
|
@@ -15,7 +15,7 @@ struct dphy_data {
|
|
|
|
void __iomem *base;
|
|
|
|
- u32 dphy_freq;
|
|
+ u32 dphy_rate;
|
|
u32 num_lanes;
|
|
};
|
|
|