mirror of
https://github.com/openwrt/openwrt.git
synced 2025-02-20 17:32:57 +00:00
d56d05f01f
Currently, setting a bridge's self PVID to other value and deleting the default VID 1 renders untagged ports of that VLAN unable to talk to the CPU port: bridge vlan add dev br0 vid 2 pvid untagged self bridge vlan del dev br0 vid 1 self bridge vlan add dev sw0p0 vid 2 pvid untagged bridge vlan del dev sw0p0 vid 1 # br0 cannot send untagged frames out of sw0p0 anymore That is because the CPU port is set to security mode and its PVID is still 1, and untagged frames are dropped due to VLAN member violation. Set the CPU port to fallback mode so untagged frames can pass through. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
This is the buildsystem for the OpenWrt Linux distribution.
To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.
You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default
2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/
3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.
4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.
Sunshine!
Your OpenWrt Community
http://www.openwrt.org