openwrt/target/linux/generic/files/drivers/net/phy
Felix Fietkau d527b82862 switch: allow Ethernet port LEDs to show specific port speeds only
This patch adds speed_mask special file to LEDs connected to switch ports
via 'switch' trigger. It allows to choose which speeds to signal when link
is up. If router has more than one LED per port, they may light up
differently depending on how fast connection is. Default setting is 'all
speeds' so backward compatibility with system scripts (for example uci) is
maintained.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48775
2016-02-25 13:31:26 +00:00
..
b53 b53: support setting port link 2016-02-03 09:33:56 +00:00
adm6996.c generic: fix adm6996 init 2015-10-26 10:39:53 +00:00
adm6996.h linux/generic: add MIB counters and port status to ADM6996 switch 2014-04-22 08:08:02 +00:00
ar8216.c ar8216: add swconfig attributes for ARL table flushing 2015-07-15 08:17:42 +00:00
ar8216.h ar8216: add swconfig attributes for ARL table flushing 2015-07-15 08:17:42 +00:00
ar8327.c ar8327: add IGMP Snooping support 2016-01-17 10:42:46 +00:00
ar8327.h ar8327: add IGMP Snooping support 2016-01-17 10:42:46 +00:00
ip17xx.c unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range. 2010-10-12 20:49:35 +00:00
mvsw61xx.c mvsw61xx: match swconfig function names 2015-09-11 16:34:49 +00:00
mvsw61xx.h Previously, all VLANs (port-based or 802.1q) were sharing a single database in the ATU. This created problems in the case of a system where two ports/devices share a MAC address (e.g. Linksys WRT1900AC eth0/eth1). 2015-08-21 08:09:52 +00:00
mvswitch.c kernel: mvswitch: merge 3.10+ compile fix into the code 2015-12-04 09:45:07 +00:00
mvswitch.h rename target/linux/generic-2.6 to generic 2010-06-26 20:42:58 +00:00
psb6970.c unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range. 2010-10-12 20:49:35 +00:00
rtl8306.c revert: kernel: rtl8306: fix max pvid & remove port isolation 2014-03-30 10:04:55 +00:00
rtl8366_smi.c strict_strtoul is obsolete, use kstrtoul instead 2013-07-27 09:23:18 +00:00
rtl8366_smi.h linux: generic: rtl836*: fix compilation with !CONFIG_OF 2012-12-15 13:32:02 +00:00
rtl8366rb.c generic: add port mirroring/monitoring capability to rtl8366rb switch 2013-06-04 13:25:52 +00:00
rtl8366s.c fix rtl8366s OF binding 2013-04-12 18:56:05 +00:00
rtl8367.c rtl8367: add support for configuring the VLAN FID 2013-08-12 17:25:25 +00:00
rtl8367b.c generic: rtl8367: add compatible string with vendor prefix 2013-04-06 17:19:31 +00:00
swconfig_leds.c switch: allow Ethernet port LEDs to show specific port speeds only 2016-02-25 13:31:26 +00:00
swconfig.c swconfig: add (PHY) generic helper setting port link 2016-02-03 09:33:38 +00:00