mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 15:02:32 +00:00
1f5f2e588a
ELECOM WRC-2533GHBK2-T is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 128 MiB - Flash : SPI-NOR 16 MiB (Macronix MX25L12835FM2I-10G) - WLAN : 2.4/5 GHz 4T4R (2x MediaTek MT7615) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - LED/keys : 4x/3x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J4: 3.3V, RX, GND, TX from SoC side - 57600n8 - Power : 12 VDC, 1.5 A Flash instruction using factory image: 1. Boot WRC-2533GHBK2-T normally 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button 4. Wait ~150 seconds to complete flashing MAC addresses: LAN : BC:5C:4C:xx:xx:FD (Config, "ethaddr" (text)) WAN : BC:5C:4C:xx:xx:FC (Config, "wanaddr" (text), Label) 2.4 GHz: BC:5C:4C:xx:xx:FE (Factory, 0x4 (hex)) 5 GHz : BC:5C:4C:xx:xx:FF (Factory, 0x8004 (hex)) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
41 lines
672 B
Plaintext
41 lines
672 B
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "mt7621_elecom_wrc-2533ghbk.dtsi"
|
|
|
|
/ {
|
|
compatible = "elecom,wrc-2533ghbk2-t", "mediatek,mt7621-soc";
|
|
model = "ELECOM WRC-2533GHBK2-T";
|
|
};
|
|
|
|
&partitions {
|
|
partition@50000 {
|
|
compatible = "denx,uimage";
|
|
label = "firmware";
|
|
reg = <0x50000 0x7a0000>;
|
|
};
|
|
|
|
partition@7f0000 {
|
|
label = "TM_1";
|
|
reg = <0x7f0000 0x200000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@9f0000 {
|
|
label = "TM_2";
|
|
reg = <0x9f0000 0x400000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@df0000 {
|
|
label = "manufacture";
|
|
reg = <0xdf0000 0x190000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@f80000 {
|
|
label = "storage";
|
|
reg = <0xf80000 0x80000>;
|
|
read-only;
|
|
};
|
|
};
|