openwrt/target/linux/ath79/image/generic-tp-link.mk
Adrian Schmutzler d4b89b7170 ath79: Add support for TP-Link TL-WR1043N v5
Specifications:

 - QCA9563 at 775 MHz
 - 64 MB RAM Zentel A3R12E40CBF-8E
 - 16 MB flash Winbond W25Q128FVSG
 - 3 (non-detachable) Antennas / 450 Mbit
 - 1x/4x WAN/LAN Gbps Ethernet (QCA8337)
 - reset and Wi-Fi buttons

TP-Link TL-WR1043N v5 appears to be identical to the TL-WR1043ND v4,
except that the USB port has been removed and there is no longer a
removable antenna option. It also has different partitioning scheme.

The software is more in line with the Archer series in that it uses a
nested bootloader scheme.

(This has been adapted from the OpenWrt Wiki page)
<https://openwrt.org/toh/tp-link/tl-wr1043nd>

Installation on HW rev.5:

Factory firmware can be installed via the WEB interface.

Alternatively, it is also possible to use a TFTP server
for recovery purposes:
 - Rename OpenWRT or original firmware to WR1043v5_tp_recovery.bin
 - Set static IP of your PC to *192.168.0.66*
 - Router will obtain IP 192.168.0.86 for a few seconds while
   loading, when reset button pressed at power On.

And finally, there's always u-boot access through the UART.
For information visit the wiki.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[reworked commit message]
2019-05-18 16:38:18 +02:00

310 lines
9.2 KiB
Makefile

include ./common-tp-link.mk
define Device/tplink_archer-a7-v5
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9563
IMAGE_SIZE := 15104k
DEVICE_TITLE := TP-Link Archer A7 v5
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
TPLINK_BOARD_ID := ARCHER-A7-V5
BOARDNAME := ARCHER-A7-V5
SUPPORTED_DEVICES += archer-a7-v5
endef
TARGET_DEVICES += tplink_archer-a7-v5
define Device/tplink_archer-c2-v3
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9563
IMAGE_SIZE := 7808k
DEVICE_TITLE := TP-Link Archer C2 v3
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
TPLINK_BOARD_ID := ARCHER-C2-V3
endef
TARGET_DEVICES += tplink_archer-c2-v3
define Device/tplink_archer-c58-v1
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9561
IMAGE_SIZE := 7936k
DEVICE_TITLE := TP-Link Archer C58 v1
TPLINK_BOARD_ID := ARCHER-C58-V1
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
SUPPORTED_DEVICES += archer-c58-v1
endef
TARGET_DEVICES += tplink_archer-c58-v1
define Device/tplink_archer-c59-v1
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9561
IMAGE_SIZE := 14528k
DEVICE_TITLE := TP-Link Archer C59 v1
TPLINK_BOARD_ID := ARCHER-C59-V1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca9888-ct
SUPPORTED_DEVICES += archer-c59-v1
endef
TARGET_DEVICES += tplink_archer-c59-v1
define Device/tplink_archer-c6-v2
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9563
IMAGE_SIZE := 7808k
DEVICE_TITLE := TP-Link Archer C6 v2
TPLINK_BOARD_ID := ARCHER-C6-V2
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
endef
TARGET_DEVICES += tplink_archer-c6-v2
define Device/tplink_archer-c5-v1
$(Device/tplink-16mlzma)
ATH_SOC := qca9558
DEVICE_TITLE := TP-Link Archer C5 v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
TPLINK_HWID := 0xc5000001
SUPPORTED_DEVICES += archer-c5
endef
TARGET_DEVICES += tplink_archer-c5-v1
define Device/tplink_archer-c7-v1
$(Device/tplink-8mlzma)
ATH_SOC := qca9558
DEVICE_TITLE := TP-Link Archer C7 v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
TPLINK_HWID := 0x75000001
endef
TARGET_DEVICES += tplink_archer-c7-v1
define Device/tplink_archer-c7-v2
$(Device/tplink-16mlzma)
ATH_SOC := qca9558
DEVICE_TITLE := TP-Link Archer C7 v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
TPLINK_HWID := 0xc7000002
IMAGES += factory-us.bin factory-eu.bin
IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US
IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
endef
TARGET_DEVICES += tplink_archer-c7-v2
define Device/tplink_archer-c7-v4
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9563
IMAGE_SIZE := 15104k
DEVICE_TITLE := TP-Link Archer C7 v4
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
TPLINK_BOARD_ID := ARCHER-C7-V4
BOARDNAME := ARCHER-C7-V4
SUPPORTED_DEVICES += archer-c7-v4
endef
TARGET_DEVICES += tplink_archer-c7-v4
define Device/tplink_archer-c7-v5
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9563
IMAGE_SIZE := 15360k
DEVICE_TITLE := TP-Link Archer C7 v5
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
TPLINK_BOARD_ID := ARCHER-C7-V5
BOARDNAME := ARCHER-C7-V5
SUPPORTED_DEVICES += archer-c7-v5
endef
TARGET_DEVICES += tplink_archer-c7-v5
define Device/tplink_cpe210-v2
$(Device/tplink-safeloader)
ATH_SOC := qca9533
IMAGE_SIZE := 7680k
DEVICE_TITLE := TP-Link CPE210 v2
TPLINK_BOARD_ID := CPE210V2
DEVICE_PACKAGES := rssileds
LOADER_TYPE := elf
SUPPORTED_DEVICES += cpe210-v2
endef
TARGET_DEVICES += tplink_cpe210-v2
define Device/tplink_cpe210-v3
$(Device/tplink-safeloader)
ATH_SOC := qca9533
IMAGE_SIZE := 7680k
DEVICE_TITLE := TP-Link CPE210 v3
DEVICE_PACKAGES := rssileds
TPLINK_BOARD_ID := CPE210V3
LOADER_TYPE := elf
SUPPORTED_DEVICES += cpe210-v3
endef
TARGET_DEVICES += tplink_cpe210-v3
define Device/tplink_re350k-v1
$(Device/tplink-safeloader)
ATH_SOC := qca9558
IMAGE_SIZE := 13760k
DEVICE_TITLE := TP-Link RE350K v1
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
TPLINK_BOARD_ID := RE350K-V1
TPLINK_HWID := 0x0
TPLINK_HWREV := 0
endef
TARGET_DEVICES += tplink_re350k-v1
define Device/tplink_re450-v2
$(Device/tplink-safeloader)
ATH_SOC := qca9563
IMAGE_SIZE := 6016k
DEVICE_TITLE := TP-Link RE450 v2
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
TPLINK_HWID := 0x0
TPLINK_HWREV := 0
TPLINK_BOARD_ID := RE450-V2
LOADER_TYPE := elf
endef
TARGET_DEVICES += tplink_re450-v2
define Device/tplink_tl-wdr3600
$(Device/tplink-8mlzma)
ATH_SOC := ar9344
DEVICE_TITLE := TP-Link TL-WDR3600
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x36000001
SUPPORTED_DEVICES += tl-wdr4300
endef
TARGET_DEVICES += tplink_tl-wdr3600
define Device/tplink_tl-wdr4300
$(Device/tplink-8mlzma)
ATH_SOC := ar9344
DEVICE_TITLE := TP-Link TL-WDR4300
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x43000001
SUPPORTED_DEVICES += tl-wdr4300
endef
TARGET_DEVICES += tplink_tl-wdr4300
define Device/tplink_tl-wdr4900-v2
$(Device/tplink-8mlzma)
ATH_SOC := qca9558
DEVICE_TITLE := TP-Link TL-WDR4900 v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x49000002
endef
TARGET_DEVICES += tplink_tl-wdr4900-v2
define Device/tplink_tl-wr810n-v1
$(Device/tplink-8mlzma)
ATH_SOC := qca9531
DEVICE_TITLE := TP-Link TL-WR810N v1
TPLINK_HWID := 0x8100001
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += tplink_tl-wr810n-v1
define Device/tplink_tl-wr810n-v2
$(Device/tplink-8mlzma)
ATH_SOC := qca9533
DEVICE_TITLE := TP-Link TL-WR810N v2
TPLINK_HWID := 0x8100002
endef
TARGET_DEVICES += tplink_tl-wr810n-v2
define Device/tplink_tl-wr710n-v1
$(Device/tplink-8mlzma)
ATH_SOC := ar9331
DEVICE_TITLE := TP-Link TL-WR710N v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x07100001
SUPPORTED_DEVICES += tl-wr710n
endef
TARGET_DEVICES += tplink_tl-wr710n-v1
define Device/tplink_tl-wr842n-v1
$(Device/tplink-8m)
ATH_SOC := ar7241
DEVICE_TITLE := TP-Link TL-WR842N/ND v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x8420001
endef
TARGET_DEVICES += tplink_tl-wr842n-v1
define Device/tplink_tl-wr842n-v2
$(Device/tplink-8mlzma)
ATH_SOC := ar9341
DEVICE_TITLE := TP-Link TL-WR842N/ND v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x8420002
SUPPORTED_DEVICES += tl-wr842n-v2
endef
TARGET_DEVICES += tplink_tl-wr842n-v2
define Device/tplink_tl-wr842n-v3
$(Device/tplink-16mlzma)
ATH_SOC := qca9533
DEVICE_TITLE := TP-Link TL-WR842N v3
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x8420003
SUPPORTED_DEVICES += tl-wr842n-v3
endef
TARGET_DEVICES += tplink_tl-wr842n-v3
define Device/tplink_tl-wr1043nd-v1
$(Device/tplink-8m)
ATH_SOC := ar9132
DEVICE_TITLE := TP-Link TL-WR1043N/ND v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x10430001
SUPPORTED_DEVICES += tl-wr1043nd
endef
TARGET_DEVICES += tplink_tl-wr1043nd-v1
define Device/tplink_tl-wr1043nd-v2
$(Device/tplink-8mlzma)
ATH_SOC := qca9558
DEVICE_TITLE := TP-Link TL-WR1043N/ND v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x10430002
SUPPORTED_DEVICES += tl-wr1043nd-v2
endef
TARGET_DEVICES += tplink_tl-wr1043nd-v2
define Device/tplink_tl-wr1043nd-v3
$(Device/tplink-8mlzma)
ATH_SOC := qca9558
DEVICE_TITLE := TP-Link TL-WR1043N/ND v3
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x10430003
SUPPORTED_DEVICES += tl-wr1043nd-v3
endef
TARGET_DEVICES += tplink_tl-wr1043nd-v3
define Device/tplink_tl-wr1043nd-v4
$(Device/tplink-safeloader)
ATH_SOC := qca9563
IMAGE_SIZE := 15552k
DEVICE_TITLE := TP-Link TL-WR1043N/ND v4
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x10430004
TPLINK_BOARD_ID := TLWR1043NDV4
SUPPORTED_DEVICES += tl-wr1043nd-v4
endef
TARGET_DEVICES += tplink_tl-wr1043nd-v4
define Device/tplink_tl-wr1043n-v5
$(Device/tplink-safeloader-uimage)
ATH_SOC := qca9563
IMAGE_SIZE := 15104k
DEVICE_TITLE := TP-Link TL-WR1043N v5
TPLINK_BOARD_ID := TLWR1043NV5
SUPPORTED_DEVICES += tl-wr1043n-v5
endef
TARGET_DEVICES += tplink_tl-wr1043n-v5
define Device/tplink_tl-wr2543-v1
$(Device/tplink-8mlzma)
ATH_SOC := ar7242
DEVICE_TITLE := TP-Link TL-WR2543N/ND v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
TPLINK_HWID := 0x25430001
IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -v 3.13.99 | \
append-metadata | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin := append-rootfs | mktplinkfw factory -v 3.13.99
SUPPORTED_DEVICES += tl-wr2543-v1
endef
TARGET_DEVICES += tplink_tl-wr2543-v1