mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 15:02:32 +00:00
6605b595ed
Manually adjusted before running quilt due to new location in tree: backport-5.15/780-v5.16-bus-mhi-pci_generic-Introduce-Sierra-EM919X-support.patch backport-5.15/781-v6.1-bus-mhi-host-always-print-detected-modem-name.patch pending-5.15/790-bus-mhi-core-add-SBL-state-callback.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me>
34 lines
1.1 KiB
Diff
34 lines
1.1 KiB
Diff
--- a/drivers/tty/serial/8250/8250.h
|
|
+++ b/drivers/tty/serial/8250/8250.h
|
|
@@ -85,6 +85,7 @@ struct serial8250_config {
|
|
#define UART_CAP_MINI BIT(17) /* Mini UART on BCM283X family lacks:
|
|
* STOP PARITY EPAR SPAR WLEN5 WLEN6
|
|
*/
|
|
+#define UART_CAP_NMOD (1 << 18) /* UART doesn't do termios */
|
|
|
|
#define UART_BUG_QUOT BIT(0) /* UART has buggy quot LSB */
|
|
#define UART_BUG_TXEN BIT(1) /* UART has buggy TX IIR status */
|
|
--- a/drivers/tty/serial/8250/8250_port.c
|
|
+++ b/drivers/tty/serial/8250/8250_port.c
|
|
@@ -289,7 +289,7 @@ static const struct serial8250_config ua
|
|
.tx_loadsz = 16,
|
|
.fcr = UART_FCR_ENABLE_FIFO |
|
|
UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
|
|
- .flags = UART_CAP_FIFO,
|
|
+ .flags = UART_CAP_FIFO | UART_CAP_NMOD,
|
|
},
|
|
[PORT_NPCM] = {
|
|
.name = "Nuvoton 16550",
|
|
@@ -2766,6 +2766,11 @@ serial8250_do_set_termios(struct uart_po
|
|
unsigned long flags;
|
|
unsigned int baud, quot, frac = 0;
|
|
|
|
+ if (up->capabilities & UART_CAP_NMOD) {
|
|
+ termios->c_cflag = 0;
|
|
+ return;
|
|
+ }
|
|
+
|
|
if (up->capabilities & UART_CAP_MINI) {
|
|
termios->c_cflag &= ~(CSTOPB | PARENB | PARODD | CMSPAR);
|
|
if ((termios->c_cflag & CSIZE) == CS5 ||
|