openwrt/package/boot/uboot-d1/patches/0037-sunxi-psci-Add-support-for-H3-CPU-0-hotplug.patch

From d11c5971f60d482c05f807c24f3ccd37cf7d0f70 Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Sat, 9 Oct 2021 17:12:57 -0500
Subject: [PATCH 37/90] sunxi: psci: Add support for H3 CPU 0 hotplug

Due to a bug in the H3 SoC, where the CPU 0 hotplug flag cannot be
written, resuming CPU 0 requires using the "Super Standby" code path in
the BROM instead of the hotplug path. This path requires jumping to an
eGON image in SRAM.

Add support to the build system to generate this eGON image and include
it in the FIT, and add code to direct the BROM to its location in SRAM.

Since the Super Standby code path in the BROM initializes the CPU and
AHB1 clocks to 24 MHz, those registers need to be restored after control
passes back to U-Boot. Furthermore, because the BROM lowers the AHB1
clock divider to /1 before switching to the lower-frequency parent,
PLL_PERIPH0 must be bypassed to prevent AHB1 from temporarily running at
600 MHz. Otherwise, this locks up the SoC.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---
 Makefile                        | 17 +++++++++++++++++
 arch/arm/cpu/armv7/sunxi/psci.c | 31 +++++++++++++++++++++++++++++++
 arch/arm/dts/sunxi-u-boot.dtsi  | 23 ++++++++++++++++++++++-
 include/configs/sun8i.h         |  4 ++++
 4 files changed, 74 insertions(+), 1 deletion(-)

--- a/Makefile
+++ b/Makefile
@@ -1013,6 +1013,23 @@ INPUTS-y += u-boot.img
 endif
 endif
 
+ifeq ($(CONFIG_MACH_SUN8I_H3)$(CONFIG_ARMV7_PSCI),yy)
+INPUTS-$(CONFIG_ARMV7_PSCI) += u-boot-resume.img
+
+MKIMAGEFLAGS_u-boot-resume.img := -B 0x400 -T sunxi_egon
+
+u-boot-resume.img: u-boot-resume.bin
+	$(call if_changed,mkimage)
+
+OBJCOPYFLAGS_u-boot-resume.bin := -O binary
+
+u-boot-resume.bin: u-boot-resume.o
+	$(call if_changed,objcopy)
+
+u-boot-resume.S: u-boot
+	@sed -En 's/(0x[[:xdigit:]]+) +psci_cpu_entry/ldr pc, =\1/p' $<.map > $@
+endif
+
 INPUTS-$(CONFIG_X86) += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
 	$(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
 	$(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin)
--- a/arch/arm/cpu/armv7/sunxi/psci.c
+++ b/arch/arm/cpu/armv7/sunxi/psci.c
@@ -10,6 +10,7 @@
 #include <common.h>
 #include <asm/cache.h>
 
+#include <asm/arch/clock.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/cpucfg.h>
 #include <asm/arch/prcm.h>
@@ -141,6 +142,13 @@ static void __secure sunxi_set_entry_add
 		(struct sunxi_cpucfg_reg *)SUNXI_CPUCFG_BASE;
 
 	writel((u32)entry, &cpucfg->priv0);
+
+#ifdef CONFIG_MACH_SUN8I_H3
+	/* Redirect CPU 0 to the secure monitor via the resume shim. */
+	writel(0x16aaefe8, &cpucfg->super_standy_flag);
+	writel(0xaa16efe8, &cpucfg->super_standy_flag);
+	writel(SUNXI_RESUME_BASE, &cpucfg->priv1);
+#endif
 }
 #endif
 
@@ -255,9 +263,12 @@ out:
 int __secure psci_cpu_on(u32 __always_unused unused, u32 mpidr, u32 pc,
 			 u32 context_id)
 {
+	struct sunxi_ccm_reg *ccu = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 	struct sunxi_cpucfg_reg *cpucfg =
 		(struct sunxi_cpucfg_reg *)SUNXI_CPUCFG_BASE;
 	u32 cpu = (mpidr & 0x3);
+	u32 cpu_clk;
+	u32 bus_clk;
 
 	/* store target PC and context id */
 	psci_save(cpu, pc, context_id);
@@ -274,12 +285,32 @@ int __secure psci_cpu_on(u32 __always_un
 	/* Lock CPU (Disable external debug access) */
 	clrbits_le32(&cpucfg->dbg_ctrl1, BIT(cpu));
 
+	if (IS_ENABLED(CONFIG_MACH_SUN8I_H3) && cpu == 0) {
+		/* Save registers that will be clobbered by the BROM. */
+		cpu_clk = readl(&ccu->cpu_axi_cfg);
+		bus_clk = readl(&ccu->ahb1_apb1_div);
+
+		/* Bypass PLL_PERIPH0 so AHB1 frequency does not spike. */
+		setbits_le32(&ccu->pll6_cfg, BIT(25));
+	}
+
 	/* Power up target CPU */
 	sunxi_cpu_set_power(cpu, true);
 
 	/* De-assert reset on target CPU */
 	writel(BIT(1) | BIT(0), &cpucfg->cpu[cpu].rst);
 
+	if (IS_ENABLED(CONFIG_MACH_SUN8I_H3) && cpu == 0) {
+		/* Spin until the BROM has clobbered the clock registers. */
+		while (readl(&ccu->ahb1_apb1_div) != 0x00001100);
+
+		/* Restore the registers and turn off PLL_PERIPH0 bypass. */
+		writel(cpu_clk, &ccu->cpu_axi_cfg);
+		writel(bus_clk, &ccu->ahb1_apb1_div);
+
+		clrbits_le32(&ccu->pll6_cfg, BIT(25));
+	}
+
 	/* Unlock CPU (Disable external debug access) */
 	setbits_le32(&cpucfg->dbg_ctrl1, BIT(cpu));
 
--- a/arch/arm/dts/sunxi-u-boot.dtsi
+++ b/arch/arm/dts/sunxi-u-boot.dtsi
@@ -6,7 +6,11 @@
 #define ARCH "arm"
 #endif
 
-#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H5)
+#if defined(CONFIG_MACH_SUN8I_H3)
+#ifdef CONFIG_ARMV7_PSCI
+#define RESUME_ADDR	SUNXI_RESUME_BASE
+#endif
+#elif defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H5)
 #define BL31_ADDR	0x00044000
 #define SCP_ADDR	0x00050000
 #elif defined(CONFIG_MACH_SUN50I_H6)
@@ -78,6 +82,20 @@
 				};
 #endif
 
+#ifdef RESUME_ADDR
+				resume {
+					description = "Super Standby resume image";
+					type = "standalone";
+					arch = ARCH;
+					compression = "none";
+					load = <RESUME_ADDR>;
+
+					blob-ext {
+						filename = "u-boot-resume.img";
+					};
+				};
+#endif
+
 #ifdef SCP_ADDR
 				scp {
 					description = "SCP firmware";
@@ -111,6 +129,9 @@
 					firmware = "uboot";
 #endif
 					loadables =
+#ifdef RESUME_ADDR
+						    "resume",
+#endif
 #ifdef SCP_ADDR
 						    "scp",
 #endif
--- a/include/configs/sun8i.h
+++ b/include/configs/sun8i.h
@@ -8,6 +8,10 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define SUNXI_RESUME_BASE		(CONFIG_ARMV7_SECURE_BASE + \
+					 CONFIG_ARMV7_SECURE_MAX_SIZE)
+#define SUNXI_RESUME_SIZE		1024
+
 #include <configs/sunxi-common.h>
 
 #endif /* __CONFIG_H */