openwrt/target/linux/bcm27xx/patches-6.1/950-0526-media-dw9807-vcm-Add-regulator-support-to-the-driver.patch

From 441e1fbef6c33549520b52ff357682b6fe7e8646 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Tue, 3 Jan 2023 16:35:59 +0000
Subject: [PATCH] media: dw9807-vcm: Add regulator support to the
 driver

Uses the regulator notifier framework so that the current
focus position will be restored whenever any user of the
regulator powers it up. This means that should the VCM
and sensor share a common regulator then starting the sensor
will automatically restore the default position. If they
have independent regulators then it will behave be powered
up when the VCM subdev is opened.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 drivers/media/i2c/dw9807-vcm.c | 113 ++++++++++++++++++++++++++-------
 1 file changed, 90 insertions(+), 23 deletions(-)

--- a/drivers/media/i2c/dw9807-vcm.c
+++ b/drivers/media/i2c/dw9807-vcm.c
@@ -15,6 +15,7 @@
 #include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
 
@@ -46,6 +47,9 @@
 
 #define MAX_RETRY		10
 
+#define DW9807_PW_MIN_DELAY_US		100
+#define DW9807_PW_DELAY_RANGE_US	10
+
 struct dw9807_cfg {
 	unsigned int idle_pos;
 	unsigned int default_pos;
@@ -56,6 +60,8 @@ struct dw9807_device {
 	struct v4l2_subdev sd;
 	u16 current_val;
 	u16 idle_pos;
+	struct regulator *vdd;
+	struct notifier_block notifier;
 };
 
 static inline struct dw9807_device *sd_to_dw9807_vcm(
@@ -157,6 +163,66 @@ static int dw9807_ramp(struct i2c_client
 	return ret;
 }
 
+static int dw9807_active(struct dw9807_device *dw9807_dev)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&dw9807_dev->sd);
+	const char tx_data[2] = { DW9807_CTL_ADDR, 0x00 };
+	int ret;
+
+	/* Power on */
+	ret = i2c_master_send(client, tx_data, sizeof(tx_data));
+	if (ret < 0) {
+		dev_err(&client->dev, "I2C write CTL fail ret = %d\n", ret);
+		return ret;
+	}
+
+	return dw9807_ramp(client, dw9807_dev->idle_pos, dw9807_dev->current_val);
+}
+
+static int dw9807_standby(struct dw9807_device *dw9807_dev)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&dw9807_dev->sd);
+	const char tx_data[2] = { DW9807_CTL_ADDR, 0x01 };
+	int ret;
+
+	if (abs(dw9807_dev->current_val - dw9807_dev->idle_pos) > DW9807_CTRL_STEPS)
+		dw9807_ramp(client, dw9807_dev->current_val, dw9807_dev->idle_pos);
+
+	/* Power down */
+	ret = i2c_master_send(client, tx_data, sizeof(tx_data));
+	if (ret < 0) {
+		dev_err(&client->dev, "I2C write CTL fail ret = %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int dw9807_regulator_event(struct notifier_block *nb,
+				  unsigned long action, void *data)
+{
+	struct dw9807_device *dw9807_dev =
+		container_of(nb, struct dw9807_device, notifier);
+
+	if (action & REGULATOR_EVENT_ENABLE) {
+		/*
+		 * Initialisation delay between VDD low->high and the moment
+		 * when the i2c command is available.
+		 * From the datasheet, it should be 10ms + 2ms (max power
+		 * up sequence duration)
+		 */
+		usleep_range(DW9807_PW_MIN_DELAY_US,
+			     DW9807_PW_MIN_DELAY_US +
+			     DW9807_PW_DELAY_RANGE_US);
+
+		dw9807_active(dw9807_dev);
+	} else if (action & REGULATOR_EVENT_PRE_DISABLE) {
+		dw9807_standby(dw9807_dev);
+	}
+
+	return 0;
+}
+
 static int dw9807_set_ctrl(struct v4l2_ctrl *ctrl)
 {
 	struct dw9807_device *dev_vcm = container_of(ctrl->handler,
@@ -257,6 +323,24 @@ static int dw9807_probe(struct i2c_clien
 	if (dw9807_dev == NULL)
 		return -ENOMEM;
 
+	dw9807_dev->vdd = devm_regulator_get_optional(&client->dev, "VDD");
+	if (IS_ERR(dw9807_dev->vdd)) {
+		if (PTR_ERR(dw9807_dev->vdd) != -ENODEV)
+			return PTR_ERR(dw9807_dev->vdd);
+
+		dw9807_dev->vdd = NULL;
+	} else {
+		dw9807_dev->notifier.notifier_call = dw9807_regulator_event;
+
+		rval = regulator_register_notifier(dw9807_dev->vdd,
+						   &dw9807_dev->notifier);
+		if (rval) {
+			dev_err(&client->dev,
+				"could not register regulator notifier\n");
+			return rval;
+		}
+	}
+
 	match = i2c_of_match_device(dw9807_of_table, client);
 	if (match) {
 		cfg = (const struct dw9807_cfg *)match->data;
@@ -320,20 +404,11 @@ static int __maybe_unused dw9807_vcm_sus
 	struct i2c_client *client = to_i2c_client(dev);
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 	struct dw9807_device *dw9807_dev = sd_to_dw9807_vcm(sd);
-	const char tx_data[2] = { DW9807_CTL_ADDR, 0x01 };
-	int ret;
-
-	if (abs(dw9807_dev->current_val - dw9807_dev->idle_pos) > DW9807_CTRL_STEPS)
-		dw9807_ramp(client, dw9807_dev->current_val, dw9807_dev->idle_pos);
 
-	/* Power down */
-	ret = i2c_master_send(client, tx_data, sizeof(tx_data));
-	if (ret < 0) {
-		dev_err(&client->dev, "I2C write CTL fail ret = %d\n", ret);
-		return ret;
-	}
+	if (dw9807_dev->vdd)
+		return regulator_disable(dw9807_dev->vdd);
 
-	return 0;
+	return dw9807_standby(dw9807_dev);
 }
 
 /*
@@ -347,19 +422,11 @@ static int  __maybe_unused dw9807_vcm_re
 	struct i2c_client *client = to_i2c_client(dev);
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 	struct dw9807_device *dw9807_dev = sd_to_dw9807_vcm(sd);
-	const char tx_data[2] = { DW9807_CTL_ADDR, 0x00 };
-	int ret;
-
-	/* Power on */
-	ret = i2c_master_send(client, tx_data, sizeof(tx_data));
-	if (ret < 0) {
-		dev_err(&client->dev, "I2C write CTL fail ret = %d\n", ret);
-		return ret;
-	}
 
-	dw9807_ramp(client, dw9807_dev->idle_pos, dw9807_dev->current_val);
+	if (dw9807_dev->vdd)
+		return regulator_enable(dw9807_dev->vdd);
 
-	return 0;
+	return dw9807_active(dw9807_dev);
 }
 
 MODULE_DEVICE_TABLE(of, dw9807_of_table);