mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-11 23:42:57 +00:00
a422b171ac
For devices without a dedicated 'diag' LED, we use sometimes one of
other LEDs for indicating at least 'boot', 'failsafe' and 'upgrade'
stages. In some cases, at the same time these LEDs have defined default
triggers in DTS using 'linux,default-trigger' property. Current 'diag'
setup removes the trigger and turns off 'boot' LED after bootup.
One of the examples of such device is TP-Link TL-WR841N v14 (ramips)
which uses 'wlan' LED with defined 'linux,default-trigger' for 'diag':
aliases {
led-boot = &led_wlan;
led-failsafe = &led_wlan;
led-upgrade = &led_wlan;
};
[...]
led_wlan: wlan {
label = "tl-wr841n-v14:green:wlan";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
This patch extends 'diag.sh' and 'leds.sh' scripts to make sure default
trigger defined in DTS is restored for 'diag' LED which isn't used for
indicating 'running' stage.
Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
217 lines
6.6 KiB
Makefile
217 lines
6.6 KiB
Makefile
#
|
|
# Copyright (C) 2007-2016 OpenWrt.org
|
|
# Copyright (C) 2010 Vertical Communications
|
|
#
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
# See /LICENSE for more information.
|
|
#
|
|
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/kernel.mk
|
|
include $(INCLUDE_DIR)/version.mk
|
|
include $(INCLUDE_DIR)/feeds.mk
|
|
|
|
PKG_NAME:=base-files
|
|
PKG_RELEASE:=214
|
|
PKG_FLAGS:=nonshared
|
|
|
|
PKG_FILE_DEPENDS:=$(PLATFORM_DIR)/ $(GENERIC_PLATFORM_DIR)/base-files/
|
|
PKG_BUILD_DEPENDS:=usign/host ucert/host
|
|
PKG_LICENSE:=GPL-2.0
|
|
|
|
# Extend depends from version.mk
|
|
PKG_CONFIG_DEPENDS += \
|
|
CONFIG_SIGNED_PACKAGES CONFIG_TARGET_INIT_PATH CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE \
|
|
CONFIG_NAND_SUPPORT \
|
|
CONFIG_CLEAN_IPKG \
|
|
CONFIG_PER_FEED_REPO \
|
|
$(foreach feed,$(FEEDS_AVAILABLE),CONFIG_FEED_$(feed))
|
|
|
|
include $(INCLUDE_DIR)/package.mk
|
|
|
|
ifneq ($(DUMP),1)
|
|
STAMP_CONFIGURED:=$(strip $(STAMP_CONFIGURED))_$(shell echo $(CONFIG_TARGET_INIT_PATH) | mkhash md5)
|
|
TARGET:=-$(BOARD)
|
|
endif
|
|
|
|
define Package/base-files
|
|
SECTION:=base
|
|
CATEGORY:=Base system
|
|
DEPENDS:=+netifd +libc +procd +jsonfilter +SIGNED_PACKAGES:usign +SIGNED_PACKAGES:openwrt-keyring +NAND_SUPPORT:ubi-utils +fstools +fwtool
|
|
TITLE:=Base filesystem for OpenWrt
|
|
URL:=http://openwrt.org/
|
|
VERSION:=$(PKG_RELEASE)-$(REVISION)
|
|
endef
|
|
|
|
define Package/urandom-seed
|
|
SECTION:=base
|
|
CATEGORY:=Base system
|
|
DEPENDS:=+libc +ubox-getrandom
|
|
TITLE:=/etc/urandom.seed handling for OpenWrt
|
|
URL:=http://openwrt.org/
|
|
VERSION:=$(PKG_RELEASE)-$(REVISION)
|
|
endef
|
|
|
|
define Package/base-files/conffiles
|
|
/etc/config/
|
|
/etc/config/network
|
|
/etc/config/system
|
|
/etc/crontabs/
|
|
/etc/dropbear/
|
|
/etc/ethers
|
|
/etc/group
|
|
/etc/hosts
|
|
/etc/inittab
|
|
/etc/iproute2/rt_protos
|
|
/etc/iproute2/rt_tables
|
|
/etc/passwd
|
|
/etc/profile
|
|
/etc/profile.d
|
|
/etc/protocols
|
|
/etc/rc.local
|
|
/etc/services
|
|
/etc/shadow
|
|
/etc/shells
|
|
/etc/sysctl.conf
|
|
/etc/sysupgrade.conf
|
|
$(call $(TARGET)/conffiles)
|
|
endef
|
|
|
|
define Package/base-files/description
|
|
This package contains a base filesystem and system scripts for OpenWrt.
|
|
endef
|
|
|
|
define ImageConfigOptions
|
|
mkdir -p $(1)/lib/preinit
|
|
echo 'pi_suppress_stderr="$(CONFIG_TARGET_PREINIT_SUPPRESS_STDERR)"' >$(1)/lib/preinit/00_preinit.conf
|
|
echo 'fs_failsafe_wait_timeout=$(if $(CONFIG_TARGET_PREINIT_TIMEOUT),$(CONFIG_TARGET_PREINIT_TIMEOUT),2)' >>$(1)/lib/preinit/00_preinit.conf
|
|
echo 'pi_init_path="$(TARGET_INIT_PATH)"' >>$(1)/lib/preinit/00_preinit.conf
|
|
echo 'pi_init_env=$(if $(CONFIG_TARGET_INIT_ENV),$(CONFIG_TARGET_INIT_ENV),"")' >>$(1)/lib/preinit/00_preinit.conf
|
|
echo 'pi_init_cmd=$(if $(CONFIG_TARGET_INIT_CMD),$(CONFIG_TARGET_INIT_CMD),"/sbin/init")' >>$(1)/lib/preinit/00_preinit.conf
|
|
echo 'pi_init_suppress_stderr="$(CONFIG_TARGET_INIT_SUPPRESS_STDERR)"' >>$(1)/lib/preinit/00_preinit.conf
|
|
echo 'pi_ifname=$(if $(CONFIG_TARGET_PREINIT_IFNAME),$(CONFIG_TARGET_PREINIT_IFNAME),"")' >>$(1)/lib/preinit/00_preinit.conf
|
|
echo 'pi_ip=$(if $(CONFIG_TARGET_PREINIT_IP),$(CONFIG_TARGET_PREINIT_IP),"192.168.1.1")' >>$(1)/lib/preinit/00_preinit.conf
|
|
echo 'pi_netmask=$(if $(CONFIG_TARGET_PREINIT_NETMASK),$(CONFIG_TARGET_PREINIT_NETMASK),"255.255.255.0")' >>$(1)/lib/preinit/00_preinit.conf
|
|
echo 'pi_broadcast=$(if $(CONFIG_TARGET_PREINIT_BROADCAST),$(CONFIG_TARGET_PREINIT_BROADCAST),"192.168.1.255")' >>$(1)/lib/preinit/00_preinit.conf
|
|
echo 'pi_preinit_net_messages="$(CONFIG_TARGET_PREINIT_SHOW_NETMSG)"' >>$(1)/lib/preinit/00_preinit.conf
|
|
echo 'pi_preinit_no_failsafe_netmsg="$(CONFIG_TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG)"' >>$(1)/lib/preinit/00_preinit.conf
|
|
echo 'pi_preinit_no_failsafe="$(CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE)"' >>$(1)/lib/preinit/00_preinit.conf
|
|
endef
|
|
|
|
define Build/Prepare
|
|
mkdir -p $(PKG_BUILD_DIR)
|
|
endef
|
|
|
|
define Build/Compile/Default
|
|
|
|
endef
|
|
Build/Compile = $(Build/Compile/Default)
|
|
|
|
ifdef CONFIG_SIGNED_PACKAGES
|
|
define Build/Configure
|
|
[ -s $(BUILD_KEY) -a -s $(BUILD_KEY).pub ] || \
|
|
$(STAGING_DIR_HOST)/bin/usign -G -s $(BUILD_KEY) -p $(BUILD_KEY).pub -c "Local build key"
|
|
|
|
[ -s $(BUILD_KEY).ucert ] || \
|
|
$(STAGING_DIR_HOST)/bin/ucert -I -c $(BUILD_KEY).ucert -p $(BUILD_KEY).pub -s $(BUILD_KEY)
|
|
|
|
endef
|
|
|
|
define Package/base-files/install-key
|
|
mkdir -p $(1)/etc/opkg/keys
|
|
$(CP) $(BUILD_KEY).pub $(1)/etc/opkg/keys/`$(STAGING_DIR_HOST)/bin/usign -F -p $(BUILD_KEY).pub`
|
|
|
|
endef
|
|
endif
|
|
|
|
ifeq ($(CONFIG_NAND_SUPPORT),)
|
|
define Package/base-files/nand-support
|
|
rm -f $(1)/lib/upgrade/nand.sh
|
|
endef
|
|
endif
|
|
|
|
define Package/base-files/install
|
|
$(CP) ./files/* $(1)/
|
|
$(Package/base-files/install-key)
|
|
$(Package/base-files/nand-support)
|
|
if [ -d $(GENERIC_PLATFORM_DIR)/base-files/. ]; then \
|
|
$(CP) $(GENERIC_PLATFORM_DIR)/base-files/* $(1)/; \
|
|
fi
|
|
if [ -d $(PLATFORM_DIR)/base-files/. ]; then \
|
|
$(CP) $(PLATFORM_DIR)/base-files/* $(1)/; \
|
|
fi
|
|
$(if $(filter-out $(PLATFORM_DIR),$(PLATFORM_SUBDIR)), \
|
|
if [ -d $(PLATFORM_SUBDIR)/base-files/. ]; then \
|
|
$(CP) $(PLATFORM_SUBDIR)/base-files/* $(1)/; \
|
|
fi; \
|
|
)
|
|
|
|
$(VERSION_SED_SCRIPT) \
|
|
$(1)/etc/banner \
|
|
$(1)/etc/openwrt_version \
|
|
$(1)/usr/lib/os-release
|
|
|
|
$(VERSION_SED_SCRIPT) \
|
|
$(1)/etc/openwrt_release \
|
|
$(1)/etc/device_info \
|
|
$(1)/usr/lib/os-release
|
|
|
|
$(SED) "s#%PATH%#$(TARGET_INIT_PATH)#g" \
|
|
$(1)/sbin/hotplug-call \
|
|
$(1)/etc/preinit \
|
|
$(1)/etc/profile
|
|
|
|
mkdir -p $(1)/CONTROL
|
|
mkdir -p $(1)/dev
|
|
mkdir -p $(1)/etc/config
|
|
mkdir -p $(1)/etc/crontabs
|
|
mkdir -p $(1)/etc/rc.d
|
|
mkdir -p $(1)/overlay
|
|
mkdir -p $(1)/lib/firmware
|
|
$(if $(LIB_SUFFIX),-$(LN) lib $(1)/lib$(LIB_SUFFIX))
|
|
mkdir -p $(1)/mnt
|
|
mkdir -p $(1)/proc
|
|
mkdir -p $(1)/tmp
|
|
mkdir -p $(1)/usr/lib
|
|
$(if $(LIB_SUFFIX),-$(LN) lib $(1)/usr/lib$(LIB_SUFFIX))
|
|
mkdir -p $(1)/usr/bin
|
|
mkdir -p $(1)/sys
|
|
mkdir -p $(1)/www
|
|
mkdir -p $(1)/root
|
|
$(LN) /proc/mounts $(1)/etc/mtab
|
|
rm -f $(1)/var
|
|
$(LN) tmp $(1)/var
|
|
mkdir -p $(1)/etc
|
|
$(LN) /tmp/resolv.conf /tmp/TZ /tmp/localtime $(1)/etc/
|
|
|
|
chmod 0600 $(1)/etc/shadow
|
|
chmod 1777 $(1)/tmp
|
|
|
|
$(call ImageConfigOptions,$(1))
|
|
$(call Package/base-files/install-target,$(1))
|
|
for conffile in $(1)/etc/config/*; do \
|
|
if [ -f "$$$$conffile" ]; then \
|
|
grep "$$$${conffile##$(1)}" $(1)/CONTROL/conffiles || \
|
|
echo "$$$${conffile##$(1)}" >> $(1)/CONTROL/conffiles; \
|
|
fi \
|
|
done
|
|
|
|
$(if $(CONFIG_INCLUDE_CONFIG), \
|
|
echo -e "# Build configuration for board $(BOARD)/$(SUBTARGET)/$(PROFILE)\n" >$(1)/etc/build.config; \
|
|
cat $(BIN_DIR)/config.buildinfo >>$(1)/etc/build.config)
|
|
|
|
$(if $(CONFIG_CLEAN_IPKG),, \
|
|
mkdir -p $(1)/etc/opkg; \
|
|
$(call FeedSourcesAppend,$(1)/etc/opkg/distfeeds.conf); \
|
|
$(VERSION_SED_SCRIPT) $(1)/etc/opkg/distfeeds.conf)
|
|
$(if $(CONFIG_IPK_FILES_CHECKSUMS),, \
|
|
rm -f $(1)/sbin/pkg_check)
|
|
endef
|
|
|
|
ifneq ($(DUMP),1)
|
|
-include $(PLATFORM_DIR)/base-files.mk
|
|
-include $(PLATFORM_SUBDIR)/base-files.mk
|
|
endif
|
|
|
|
$(eval $(call BuildPackage,base-files))
|