John Crispin 449c5f7b30 ramips: Add support for ZTE Q7 ... ZTE Q7 is a wireless router with SD Card,USB,1 ethernet port and a battery.It used MT7620a SoC. I can,t find any information about this router on ZTE's website. But I found this : http://en.cctairmobi.com/plus/list.php?tid=40 This router is the same as ZTE Q7 and later I found that both routers are made by the same company:-D This patch adds support for it. Because there is only one port,I disabled VLAN and use eth0 as lan port. I could only create a sysupgrade firmware because I don't know how the orignal webpage check the uploaded image:-( Signed-off-by: 郭传鈜 <gch981213@gmail.com> SVN-Revision: 45208		2015-04-01 08:31:46 +00:00
..
base-files	ramips: Add support for ZTE Q7	2015-04-01 08:31:46 +00:00
dts	ramips: Add support for ZTE Q7	2015-04-01 08:31:46 +00:00
files	ramips: make ethernet register map u16 instead of u32	2015-03-22 15:11:14 +00:00
image	ramips: Add support for ZTE Q7	2015-04-01 08:31:46 +00:00
mt7620	ralink: drop 3.14 support	2015-03-16 07:39:46 +00:00
mt7621	ralink: mt7621 add ECHI OCHI XCHI support	2015-03-26 10:59:51 +00:00
mt7628	ralink: drop 3.14 support	2015-03-16 07:39:46 +00:00
patches-3.18	ralink: mt7621 add ECHI OCHI XCHI support	2015-03-27 19:07:29 +00:00
rt288x	ralink: drop 3.14 support	2015-03-16 07:39:46 +00:00
rt305x	ralink: drop 3.14 support	2015-03-16 07:39:46 +00:00
rt3883	ralink: drop 3.14 support	2015-03-16 07:39:46 +00:00
base-files.mk	ramips: remove default network configuration, and generate that from uci-defaults	2011-12-01 22:48:51 +00:00
Makefile	ralink: bump to v3.18	2015-02-19 14:04:47 +00:00
modules.mk	ralink: MT7621 add i2c controller driver	2015-03-12 10:06:17 +00:00