mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 23:12:32 +00:00
d883eaacd4
The QCA9550 family of SoCs have a slightly different reset sequence compared to older chips. Normally the bootloader performs this sequence, however some bootloader implementation expect the operating system to clear the reset. Also get the PCIe resets from OF to support the second RC of the QCA9558. This is required for the AVM FRITZ!WLAN Repeater 1750E to work, as EVA leaves the PCIe bus in reset. Tested: AVM FRITZ!WLAN Repeater 1750E - OCEDO Koala Signed-off-by: David Bauer <mail@david-bauer.net>
131 lines
4.5 KiB
Diff
131 lines
4.5 KiB
Diff
From: David Bauer <mail@david-bauer.net>
|
|
Date: Sat, 11 Apr 2020 14:03:12 +0200
|
|
Subject: MIPS: pci-ar724x: add QCA9550 reset sequence
|
|
|
|
The QCA9550 family of SoCs have a slightly different reset
|
|
sequence compared to older chips.
|
|
|
|
Normally the bootloader performs this sequence, however
|
|
some bootloader implementation expect the operating system
|
|
to clear the reset.
|
|
|
|
Also get the resets from OF to support handling of the second
|
|
PCIe root-complex on the QCA9558.
|
|
|
|
Signed-off-by: David Bauer <mail@david-bauer.net>
|
|
|
|
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
|
|
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
|
|
@@ -391,6 +391,7 @@
|
|
#define QCA955X_PLL_CPU_CONFIG_REG 0x00
|
|
#define QCA955X_PLL_DDR_CONFIG_REG 0x04
|
|
#define QCA955X_PLL_CLK_CTRL_REG 0x08
|
|
+#define QCA955X_PLL_PCIE_CONFIG_REG 0x0c
|
|
#define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28
|
|
#define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48
|
|
#define QCA955X_PLL_ETH_SGMII_SERDES_REG 0x4c
|
|
@@ -476,6 +477,9 @@
|
|
#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL BIT(21)
|
|
#define QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
|
|
|
|
+#define QCA955X_PLL_PCIE_CONFIG_PLL_PWD BIT(30)
|
|
+#define QCA955X_PLL_PCIE_CONFIG_PLL_BYPASS BIT(16)
|
|
+
|
|
#define QCA956X_PLL_SWITCH_CLOCK_SPARE_I2C_CLK_SELB BIT(5)
|
|
#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL0_1 BIT(6)
|
|
#define QCA956X_PLL_SWITCH_CLOCK_SPARE_UART1_CLK_SEL BIT(7)
|
|
--- a/arch/mips/pci/pci-ar724x.c
|
|
+++ b/arch/mips/pci/pci-ar724x.c
|
|
@@ -8,6 +8,7 @@
|
|
|
|
#include <linux/irq.h>
|
|
#include <linux/pci.h>
|
|
+#include <linux/reset.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
@@ -55,6 +56,9 @@ struct ar724x_pci_controller {
|
|
struct irq_domain *domain;
|
|
struct resource io_res;
|
|
struct resource mem_res;
|
|
+
|
|
+ struct reset_control *hc_reset;
|
|
+ struct reset_control *phy_reset;
|
|
};
|
|
|
|
static struct irq_chip ar724x_pci_irq_chip;
|
|
@@ -340,18 +344,30 @@ static void ar724x_pci_hw_init(struct ar
|
|
int wait = 0;
|
|
|
|
/* deassert PCIe host controller and PCIe PHY reset */
|
|
- ath79_device_reset_clear(AR724X_RESET_PCIE);
|
|
- ath79_device_reset_clear(AR724X_RESET_PCIE_PHY);
|
|
+ reset_control_deassert(apc->hc_reset);
|
|
+ reset_control_deassert(apc->phy_reset);
|
|
|
|
- /* remove the reset of the PCIE PLL */
|
|
- ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
|
|
- ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET;
|
|
- ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
|
|
-
|
|
- /* deassert bypass for the PCIE PLL */
|
|
- ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
|
|
- ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
|
|
- ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
|
|
+ if (of_device_is_compatible(apc->np, "qcom,qca9550-pci")) {
|
|
+ /* remove the reset of the PCIE PLL */
|
|
+ ppl = ath79_pll_rr(QCA955X_PLL_PCIE_CONFIG_REG);
|
|
+ ppl &= ~QCA955X_PLL_PCIE_CONFIG_PLL_PWD;
|
|
+ ath79_pll_wr(QCA955X_PLL_PCIE_CONFIG_REG, ppl);
|
|
+
|
|
+ /* deassert bypass for the PCIE PLL */
|
|
+ ppl = ath79_pll_rr(QCA955X_PLL_PCIE_CONFIG_REG);
|
|
+ ppl &= ~QCA955X_PLL_PCIE_CONFIG_PLL_BYPASS;
|
|
+ ath79_pll_wr(QCA955X_PLL_PCIE_CONFIG_REG, ppl);
|
|
+ } else {
|
|
+ /* remove the reset of the PCIE PLL */
|
|
+ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
|
|
+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET;
|
|
+ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
|
|
+
|
|
+ /* deassert bypass for the PCIE PLL */
|
|
+ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
|
|
+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
|
|
+ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
|
|
+ }
|
|
|
|
/* set PCIE Application Control to ready */
|
|
app = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_APP);
|
|
@@ -399,6 +415,14 @@ static int ar724x_pci_probe(struct platf
|
|
if (apc->irq < 0)
|
|
return -EINVAL;
|
|
|
|
+ apc->hc_reset = devm_reset_control_get_exclusive(&pdev->dev, "hc");
|
|
+ if (IS_ERR(apc->hc_reset))
|
|
+ return PTR_ERR(apc->hc_reset);
|
|
+
|
|
+ apc->phy_reset = devm_reset_control_get_exclusive(&pdev->dev, "phy");
|
|
+ if (IS_ERR(apc->phy_reset))
|
|
+ return PTR_ERR(apc->phy_reset);
|
|
+
|
|
apc->np = pdev->dev.of_node;
|
|
apc->pci_controller.pci_ops = &ar724x_pci_ops;
|
|
apc->pci_controller.io_resource = &apc->io_res;
|
|
@@ -409,7 +433,7 @@ static int ar724x_pci_probe(struct platf
|
|
* Do the full PCIE Root Complex Initialization Sequence if the PCIe
|
|
* host controller is in reset.
|
|
*/
|
|
- if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE)
|
|
+ if (reset_control_status(apc->hc_reset))
|
|
ar724x_pci_hw_init(apc);
|
|
|
|
apc->link_up = ar724x_pci_check_link(apc);
|
|
@@ -427,6 +451,7 @@ static int ar724x_pci_probe(struct platf
|
|
|
|
static const struct of_device_id ar724x_pci_ids[] = {
|
|
{ .compatible = "qcom,ar7240-pci" },
|
|
+ { .compatible = "qcom,qca9550-pci" },
|
|
{},
|
|
};
|
|
|