mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 01:59:02 +00:00
a69eaf8079
This is required for the AT24 EEPROM holding MAC address on Meraki devices to probe before preinit starts, so all network devices can be available at the preinit network setup starts Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16634 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
537 lines
15 KiB
Makefile
537 lines
15 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0-only
|
|
#
|
|
# Copyright (C) 2013 OpenWrt.org
|
|
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
define Image/Prepare
|
|
rm -f $(KDIR)/fs_mark
|
|
echo -ne '\xde\xad\xc0\xde' > $(KDIR)/fs_mark
|
|
$(call prepare_generic_squashfs,$(KDIR)/fs_mark)
|
|
|
|
# For UBI we want only one extra block
|
|
rm -f $(KDIR)/ubi_mark
|
|
echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
|
|
endef
|
|
|
|
define Build/lzma-d16
|
|
$(STAGING_DIR_HOST)/bin/lzma e $@ -d16 $(1) $@.new
|
|
mv $@.new $@
|
|
endef
|
|
|
|
# Similar to Build/tplink-safeloader but uses TRX instead of clean kernel
|
|
define Build/bcm53xx-tplink-safeloader
|
|
$(STAGING_DIR_HOST)/bin/trx \
|
|
-o $@.trx \
|
|
-m 33554432 \
|
|
-f $(IMAGE_KERNEL) -a 1024
|
|
$(STAGING_DIR_HOST)/bin/tplink-safeloader \
|
|
-B $(TPLINK_BOARD) \
|
|
-k $@.trx \
|
|
-r $@ \
|
|
-j \
|
|
-o $@.new
|
|
mv $@.new $@
|
|
rm $@.trx
|
|
endef
|
|
|
|
define Build/buffalo-wzr-header
|
|
$(eval product=$(word 1,$(1)))
|
|
$(eval region=$(word 2,$(1)))
|
|
( \
|
|
echo $(product)_$(BUFFALO_TAG_VERSION)_$(BUFFALO_TAG_MINOR)_$(region)_$(BUFFALO_TAG_PLATFORM); \
|
|
echo filelen=$$(stat -c%s $@); \
|
|
cat $@ \
|
|
) > $@.new
|
|
mv $@.new $@
|
|
endef
|
|
|
|
# TRX with only one (kernel) partition
|
|
define Build/trx
|
|
$(STAGING_DIR_HOST)/bin/trx \
|
|
-o $@.new \
|
|
-m 33554432 \
|
|
-f $@
|
|
mv $@.new $@
|
|
endef
|
|
|
|
define Build/trx-serial
|
|
$(STAGING_DIR_HOST)/bin/otrx create $@.new \
|
|
-f $(IMAGE_KERNEL) -a 1024 \
|
|
-f $@ -a 0x10000 -A $(KDIR)/fs_mark
|
|
mv $@.new $@
|
|
endef
|
|
|
|
define Build/trx-nand
|
|
# kernel: always use 4 MiB (-28 B or TRX header) to allow upgrades even
|
|
# if it grows up between releases
|
|
# root: UBI with one extra block containing UBI mark to trigger erasing
|
|
# rest of partition
|
|
$(STAGING_DIR_HOST)/bin/otrx create $@.new \
|
|
-f $(IMAGE_KERNEL) -a 0x20000 -b 0x400000 \
|
|
-f $@ \
|
|
-A $(KDIR)/ubi_mark -a 0x20000
|
|
mv $@.new $@
|
|
endef
|
|
|
|
define Build/asus-trx
|
|
$(STAGING_DIR_HOST)/bin/asustrx \
|
|
-p $(ASUS_PRODUCTID) -i $@ -o $@.new
|
|
mv $@.new $@
|
|
endef
|
|
|
|
define Build/luxul-lxl
|
|
$(STAGING_DIR_HOST)/bin/lxlfw create $@.new \
|
|
-i $@ \
|
|
-b $(LUXUL_BOARD)
|
|
mv $@.new $@
|
|
endef
|
|
|
|
# Outputs a lzma compressed U-Boot that start at 0x00008000
|
|
# just like the D-Link boot loaders expect
|
|
define Build/dlink-uboot-bin
|
|
$(STAGING_DIR_HOST)/bin/lzma e $(STAGING_DIR_IMAGE)/$(DEVICE_NAME)-u-boot.bin -d16 $@
|
|
endef
|
|
|
|
define Build/seama-nand
|
|
# Seama entity
|
|
$(STAGING_DIR_HOST)/bin/oseama \
|
|
entity $@.entity \
|
|
-m "dev=/dev/mtdblock/7" \
|
|
-m "type=firmware" \
|
|
-f $(IMAGE_KERNEL) \
|
|
-b 0x400000 \
|
|
-f $@ \
|
|
-f $(KDIR)/ubi_mark
|
|
# Seama container
|
|
$(STAGING_DIR_HOST)/bin/seama \
|
|
-s $@ \
|
|
-m "signature=$(SIGNATURE)" \
|
|
-i $@.entity
|
|
endef
|
|
|
|
define Build/dwl8610ap-image
|
|
mkdir -p $@.tmptar
|
|
# The DWL8610AP pretends to be a Broadcom reference design
|
|
echo "bcm953012er" > $@.tmptar/board
|
|
echo "LVL7" > $@.tmptar/model
|
|
# Something high beyond what D-Link has put out
|
|
echo "5.0.0.0" > $@.tmptar/version
|
|
# Create rootfs.bin, this is just a NAND image including everything
|
|
cp $@ $@.tmptar/rootfs.bin
|
|
# Hash the rootfs.bin
|
|
cat $@.tmptar/rootfs.bin | md5sum > $@.tmptar/rootfs.md5
|
|
cd $@.tmptar && tar -c -f $@.new *
|
|
rm -rf $@.tmptar
|
|
mv $@.new $@
|
|
endef
|
|
|
|
DTS_DIR := $(DTS_DIR)/broadcom
|
|
|
|
DEVICE_VARS += ASUS_PRODUCTID
|
|
DEVICE_VARS += BUFFALO_TAG_PLATFORM BUFFALO_TAG_VERSION BUFFALO_TAG_MINOR
|
|
DEVICE_VARS += SIGNATURE
|
|
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_REGION TPLINK_BOARD
|
|
DEVICE_VARS += LUXUL_BOARD
|
|
|
|
IEEE8021X := wpad-basic-mbedtls
|
|
B43 := $(IEEE8021X) kmod-b43
|
|
BRCMFMAC_43602A1 := $(IEEE8021X) kmod-brcmfmac brcmfmac-firmware-43602a1-pcie
|
|
BRCMFMAC_4366B1 := $(IEEE8021X) kmod-brcmfmac brcmfmac-firmware-4366b1-pcie
|
|
BRCMFMAC_4366C0 := $(IEEE8021X) kmod-brcmfmac brcmfmac-firmware-4366c0-pcie
|
|
USB2_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-phy-bcm-ns-usb2
|
|
USB2_PACKAGES += kmod-usb-ledtrig-usbport
|
|
USB3_PACKAGES := $(USB2_PACKAGES) kmod-usb3 kmod-phy-bcm-ns-usb3
|
|
|
|
define Device/Default
|
|
PROFILES = Generic $$(DEVICE_NAME)
|
|
# .dtb files are prefixed by SoC type, e.g. bcm4708- which is not included in device/image names
|
|
# extract the full dtb name based on the device info
|
|
DEVICE_DTS := $(patsubst %.dtb,%,$(notdir $(wildcard $(if $(IB),$(KDIR),$(DTS_DIR))/*-$(subst _,-,$(1)).dtb)))
|
|
KERNEL := kernel-bin | append-dtb | lzma-d16
|
|
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
|
|
KERNEL_INITRAMFS_SUFFIX := .trx
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma-d16 | trx
|
|
FILESYSTEMS := squashfs
|
|
KERNEL_NAME := zImage
|
|
DEVICE_IMG_NAME = $$(DEVICE_IMG_PREFIX)-$$(1).$$(2)
|
|
IMAGES := trx
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE/trx := append-ubi | trx-nand
|
|
endef
|
|
|
|
define Device/asus
|
|
DEVICE_VENDOR := ASUS
|
|
IMAGES := trx
|
|
IMAGE/trx := append-ubi | trx-nand | asus-trx
|
|
endef
|
|
|
|
define Device/asus_rt-ac3100
|
|
$(call Device/asus)
|
|
DEVICE_MODEL := RT-AC3100
|
|
DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
|
|
ASUS_PRODUCTID := RT-AC3100
|
|
endef
|
|
TARGET_DEVICES += asus_rt-ac3100
|
|
|
|
define Device/asus_rt-ac56u
|
|
$(call Device/asus)
|
|
DEVICE_MODEL := RT-AC56U
|
|
DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
|
|
ASUS_PRODUCTID := RT-AC56U
|
|
endef
|
|
TARGET_DEVICES += asus_rt-ac56u
|
|
|
|
define Device/asus_rt-ac68u
|
|
$(call Device/asus)
|
|
DEVICE_MODEL := RT-AC68U
|
|
DEVICE_PACKAGES := $(USB3_PACKAGES)
|
|
ASUS_PRODUCTID := RT-AC68U
|
|
endef
|
|
TARGET_DEVICES += asus_rt-ac68u
|
|
|
|
define Device/asus_rt-ac87u
|
|
$(call Device/asus)
|
|
DEVICE_MODEL := RT-AC87U
|
|
DEVICE_PACKAGES := $(USB3_PACKAGES)
|
|
ASUS_PRODUCTID := RT-AC87U
|
|
endef
|
|
TARGET_DEVICES += asus_rt-ac87u
|
|
|
|
define Device/asus_rt-ac88u
|
|
$(call Device/asus)
|
|
DEVICE_MODEL := RT-AC88U
|
|
DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
|
|
ASUS_PRODUCTID := RT-AC88U
|
|
endef
|
|
TARGET_DEVICES += asus_rt-ac88u
|
|
|
|
define Device/asus_rt-n18u
|
|
$(call Device/asus)
|
|
DEVICE_MODEL := RT-N18U
|
|
DEVICE_PACKAGES := $(USB3_PACKAGES)
|
|
ASUS_PRODUCTID := RT-N18U
|
|
endef
|
|
TARGET_DEVICES += asus_rt-n18u
|
|
|
|
# Buffalo devices have TFTP recovery mode which can work nicely with initramfs
|
|
# kernels.
|
|
# We should have two initramfs images for Buffalo: plain initramfs kernel and
|
|
# TRX with initramfs kernel. It's not possible right now so let's just build
|
|
# plain initramfs kernel as it may be more useful.
|
|
define Device/buffalo/Default
|
|
DEVICE_VENDOR := Buffalo
|
|
KERNEL_INITRAMFS_SUFFIX = $$(KERNEL_SUFFIX)
|
|
KERNEL_INITRAMFS = $$(KERNEL)
|
|
endef
|
|
|
|
define Device/buffalo_wxr-1900dhp
|
|
$(call Device/buffalo/Default)
|
|
DEVICE_MODEL := WXR-1900DHP
|
|
DEVICE_PACKAGES := $(USB3_PACKAGES)
|
|
endef
|
|
TARGET_DEVICES += buffalo_wxr-1900dhp
|
|
|
|
define Device/buffalo_wzr-600dhp2
|
|
$(call Device/buffalo/Default)
|
|
DEVICE_MODEL := WZR-600DHP2
|
|
DEVICE_PACKAGES := $(B43) $(USB2_PACKAGES)
|
|
endef
|
|
TARGET_DEVICES += buffalo_wzr-600dhp2
|
|
|
|
define Device/buffalo_wzr-900dhp
|
|
$(call Device/buffalo/Default)
|
|
DEVICE_MODEL := WZR-900DHP
|
|
DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
|
|
BUFFALO_TAG_PLATFORM := bcm
|
|
BUFFALO_TAG_VERSION := 9.99
|
|
BUFFALO_TAG_MINOR := 9.99
|
|
IMAGES += factory-DHP-EU.bin factory-DHP2-JP.bin
|
|
IMAGE/factory-DHP-EU.bin := \
|
|
append-ubi | trx-nand | buffalo-wzr-header WZR-900DHP EU | \
|
|
buffalo-enc WZR-900DHP $$(BUFFALO_TAG_VERSION) | \
|
|
buffalo-tag-dhp WZR-900DHP EU mlang20 | buffalo-enc-tag | \
|
|
buffalo-dhp-image
|
|
IMAGE/factory-DHP2-JP.bin := \
|
|
append-ubi | trx-nand | buffalo-wzr-header WZR-900DHP2 JP | \
|
|
buffalo-enc WZR-900DHP2 $$(BUFFALO_TAG_VERSION) | \
|
|
buffalo-tag-dhp WZR-900DHP2 JP jp | buffalo-enc-tag | \
|
|
buffalo-dhp-image
|
|
endef
|
|
TARGET_DEVICES += buffalo_wzr-900dhp
|
|
|
|
define Device/buffalo_wzr-1750dhp
|
|
$(call Device/buffalo/Default)
|
|
DEVICE_MODEL := WZR-1750DHP
|
|
DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
|
|
endef
|
|
TARGET_DEVICES += buffalo_wzr-1750dhp
|
|
|
|
define Device/dlink
|
|
DEVICE_VENDOR := D-Link
|
|
IMAGES := bin
|
|
IMAGE/bin := append-ubi | seama-nand
|
|
endef
|
|
|
|
define Device/dlink_dir-885l
|
|
DEVICE_MODEL := DIR-885L
|
|
DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(USB3_PACKAGES)
|
|
$(Device/dlink)
|
|
SIGNATURE := wrgac42_dlink.2015_dir885l
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-885l
|
|
|
|
define Device/dlink_dir-890l
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DIR-890L
|
|
DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB2_PACKAGES) $(USB3_PACKAGES)
|
|
# Layout: U-boot (128kb max) followed by kernel and appended DTB.
|
|
# This is done because the boot loader will only read the first 2 MB
|
|
# from the flash and decompress the LZMA it finds there after the
|
|
# SEAMA header. Since the compressed kernel will not fit in 2 MB,
|
|
# we put U-Boot there and let U-Boot read and execute the kernel.
|
|
KERNEL := dlink-uboot-bin | pad-to 128k | append-kernel | append-dtb
|
|
$(Device/dlink)
|
|
SIGNATURE := wrgac36_dlink.2013gui_dir890
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-890l
|
|
|
|
define Device/dlink_dwl-8610ap
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DWL-8610AP
|
|
DEVICE_PACKAGES := $(B43)
|
|
IMAGES := factory.tar
|
|
IMAGE/factory.tar := append-ubi | trx-nand | dwl8610ap-image
|
|
endef
|
|
TARGET_DEVICES += dlink_dwl-8610ap
|
|
|
|
define Device/linksys_ea6300-v1
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := EA6300
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
|
|
endef
|
|
TARGET_DEVICES += linksys_ea6300-v1
|
|
|
|
define Device/linksys_ea6500-v2
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := EA6500
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
|
|
endef
|
|
TARGET_DEVICES += linksys_ea6500-v2
|
|
|
|
define Device/linksys_ea9200
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := EA9200
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
|
|
endef
|
|
TARGET_DEVICES += linksys_ea9200
|
|
|
|
define Device/linksys_ea9500
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := EA9500
|
|
DEVICE_PACKAGES := $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
|
|
DEVICE_DTS := bcm47094-linksys-panamera
|
|
endef
|
|
TARGET_DEVICES += linksys_ea9500
|
|
|
|
define Device/luxul
|
|
DEVICE_VENDOR := Luxul
|
|
IMAGES := lxl
|
|
IMAGE/lxl := append-ubi | trx-nand | luxul-lxl
|
|
endef
|
|
|
|
define Device/luxul_abr-4500
|
|
$(Device/luxul)
|
|
DEVICE_MODEL := ABR-4500
|
|
DEVICE_PACKAGES := $(USB3_PACKAGES)
|
|
LUXUL_BOARD := ABR-4500
|
|
endef
|
|
TARGET_DEVICES += luxul_abr-4500
|
|
|
|
define Device/luxul_xap-1610
|
|
$(Device/luxul)
|
|
DEVICE_MODEL := XAP-1610
|
|
DEVICE_PACKAGES := $(BRCMFMAC_4366C0)
|
|
IMAGE/lxl := append-rootfs | trx-serial | luxul-lxl
|
|
LUXUL_BOARD := XAP-1610
|
|
endef
|
|
TARGET_DEVICES += luxul_xap-1610
|
|
|
|
define Device/luxul_xbr-4500
|
|
$(Device/luxul)
|
|
DEVICE_MODEL := XBR-4500
|
|
DEVICE_PACKAGES := $(USB3_PACKAGES)
|
|
LUXUL_BOARD := XBR-4500
|
|
endef
|
|
TARGET_DEVICES += luxul_xbr-4500
|
|
|
|
define Device/luxul_xwr-3150
|
|
$(Device/luxul)
|
|
DEVICE_MODEL := XWR-3150
|
|
DEVICE_PACKAGES := $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
|
|
DEVICE_DTS := bcm47094-luxul-xwr-3150-v1
|
|
LUXUL_BOARD := XWR-3150
|
|
endef
|
|
TARGET_DEVICES += luxul_xwr-3150
|
|
|
|
define Device/meraki_mr26
|
|
DEVICE_VENDOR := Meraki
|
|
DEVICE_MODEL := MR26
|
|
DEVICE_PACKAGES := $(B43) kmod-hwmon-ina2xx kmod-leds-uleds nu801
|
|
DEVICE_DTS := bcm53015-meraki-mr26
|
|
# resize the initramfs to fit the size of the existing part.safe.
|
|
KERNEL_LOADADDR := 0x00008000
|
|
KERNEL_INITRAMFS_SUFFIX := .bin
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | gzip | uImage gzip | pad-to 9310208
|
|
# LZMA is not supported by the uboot
|
|
KERNEL := kernel-bin | append-dtb | gzip | uImage gzip
|
|
IMAGES += sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += meraki_mr26
|
|
|
|
define Device/meraki_mr32
|
|
DEVICE_VENDOR := Meraki
|
|
DEVICE_MODEL := MR32
|
|
DEVICE_PACKAGES := $(B43) kmod-leds-pwm kmod-hwmon-ina2xx kmod-bluetooth
|
|
DEVICE_DTS := bcm53016-meraki-mr32
|
|
# Meraki FW r23 tries to resize the part.safe partition before it will
|
|
# flash the image. This is a bit of a problem, since resizing will fail
|
|
# if the partition is smaller than the old one.
|
|
KERNEL_LOADADDR := 0x00008000
|
|
KERNEL_INITRAMFS_SUFFIX := .bin
|
|
DEVICE_DTS_DELIMITER := @
|
|
DEVICE_DTS_CONFIG := config@1
|
|
KERNEL_INITRAMFS := kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb | \
|
|
pad-to 10362880
|
|
KERNEL := kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
|
IMAGES += sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
|
|
# The loader is specifically looking for fdt@2:
|
|
# [ 3.190000] find_itb_subimage: error finding fdt@2: FDT_ERR_NOTFOUND
|
|
# The image won't boot, if it isn't found. :(
|
|
DEVICE_FDT_NUM := 2
|
|
endef
|
|
TARGET_DEVICES += meraki_mr32
|
|
|
|
define Device/netgear
|
|
DEVICE_VENDOR := NETGEAR
|
|
IMAGES := chk
|
|
IMAGE/chk := append-ubi | trx-nand | netgear-chk
|
|
NETGEAR_REGION := 1
|
|
endef
|
|
|
|
define Device/netgear_r6250
|
|
DEVICE_MODEL := R6250
|
|
DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
|
|
$(Device/netgear)
|
|
NETGEAR_BOARD_ID := U12H245T00_NETGEAR
|
|
endef
|
|
TARGET_DEVICES += netgear_r6250
|
|
|
|
define Device/netgear_r6300-v2
|
|
DEVICE_MODEL := R6300
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_PACKAGES := $(B43) $(USB3_PACKAGES)
|
|
$(Device/netgear)
|
|
NETGEAR_BOARD_ID := U12H240T00_NETGEAR
|
|
endef
|
|
TARGET_DEVICES += netgear_r6300-v2
|
|
|
|
define Device/netgear_r7000
|
|
DEVICE_MODEL := R7000
|
|
DEVICE_PACKAGES := $(USB3_PACKAGES)
|
|
$(Device/netgear)
|
|
NETGEAR_BOARD_ID := U12H270T00_NETGEAR
|
|
endef
|
|
TARGET_DEVICES += netgear_r7000
|
|
|
|
define Device/netgear_r7900
|
|
DEVICE_MODEL := R7900
|
|
DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
|
|
$(Device/netgear)
|
|
NETGEAR_BOARD_ID := U12H315T30_NETGEAR
|
|
endef
|
|
TARGET_DEVICES += netgear_r7900
|
|
|
|
define Device/netgear_r8000
|
|
DEVICE_MODEL := R8000
|
|
DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
|
|
$(Device/netgear)
|
|
NETGEAR_BOARD_ID := U12H315T00_NETGEAR
|
|
endef
|
|
TARGET_DEVICES += netgear_r8000
|
|
|
|
define Device/netgear_r8500
|
|
DEVICE_MODEL := R8500
|
|
DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(USB3_PACKAGES)
|
|
$(Device/netgear)
|
|
NETGEAR_BOARD_ID := U12H334T00_NETGEAR
|
|
DEFAULT := n
|
|
endef
|
|
TARGET_DEVICES += netgear_r8500
|
|
|
|
define Device/smartrg_sr400ac
|
|
DEVICE_VENDOR := SmartRG
|
|
DEVICE_MODEL := SR400ac
|
|
DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES)
|
|
IMAGES := trx
|
|
IMAGE/trx := append-rootfs | trx-serial
|
|
KERNEL_INITRAMFS_SUFFIX := .bin
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma-d16
|
|
endef
|
|
TARGET_DEVICES += smartrg_sr400ac
|
|
|
|
define Device/phicomm_k3
|
|
DEVICE_VENDOR := PHICOMM
|
|
DEVICE_MODEL := K3
|
|
DEVICE_ALT0_VENDOR := Wavlink
|
|
DEVICE_ALT0_MODEL := QUANTUM DAX
|
|
DEVICE_ALT1_VENDOR := Wavlink
|
|
DEVICE_ALT1_MODEL := WL-WN538A8
|
|
DEVICE_PACKAGES := $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
|
|
IMAGES := trx
|
|
endef
|
|
TARGET_DEVICES += phicomm_k3
|
|
|
|
define Device/tenda_ac9
|
|
DEVICE_VENDOR := Tenda
|
|
DEVICE_MODEL := AC9
|
|
DEVICE_PACKAGES := $(B43) $(USB2_PACKAGES)
|
|
IMAGES := trx
|
|
IMAGE/trx := append-rootfs | trx-serial
|
|
endef
|
|
TARGET_DEVICES += tenda_ac9
|
|
|
|
define Device/tplink_archer-c5-v2
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := Archer C5
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_PACKAGES := $(B43) $(USB2_PACKAGES)
|
|
IMAGES := bin
|
|
IMAGE/bin := append-rootfs | bcm53xx-tplink-safeloader
|
|
TPLINK_BOARD := ARCHER-C5-V2
|
|
BROKEN := y
|
|
endef
|
|
#TARGET_DEVICES += tplink_archer-c5-v2
|
|
|
|
define Device/tplink_archer-c9-v1
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := Archer C9
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := $(USB3_PACKAGES)
|
|
IMAGES := bin
|
|
IMAGE/bin := append-rootfs | bcm53xx-tplink-safeloader
|
|
TPLINK_BOARD := ARCHERC9
|
|
BROKEN := y
|
|
endef
|
|
#TARGET_DEVICES += tplink_archer-c9-v1
|
|
|
|
$(eval $(call BuildImage))
|