openwrt/target/linux/lantiq/dts/ARV4525PW.dts
Mathias Kresin 91d5067091 lantiq: use the etop driver DT bindings only
Use the generic mtd-mac-address dts property to get a mac address from
flash instead of the lantiq specific one.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-10 02:04:31 +02:00

166 lines
2.7 KiB
Plaintext

/dts-v1/;
/include/ "danube.dtsi"
/ {
model = "ARV4525PW - Speedport W501V Typ A";
chosen {
leds {
/* we dont have a power led, lets use the online led */
boot = &online;
failsafe = &online;
dsl = &dsl;
internet = &online;
wifi = &wifi;
};
};
memory@0 {
reg = <0x0 0x2000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 0>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>;
read-only;
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x3d0000>;
};
boardconfig: partition@400000 {
label = "boardconfig";
reg = <0x3f0000 0x10000>;
read-only;
};
};
};
ath5k_eep {
compatible = "ath5k,eeprom";
ath,eep-flash = <&boardconfig 0x400>;
ath,mac-offset = <0x0>;
ath,eep-swap;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
pci_in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,open-drain = <1>;
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <2>;
lantiq,output = <1>;
};
relay {
lantiq,pins = "io31";
lantiq,output = <1>;
};
};
};
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
pci@E105400 {
status = "okay";
gpio-reset = <&gpio 21 0>;
};
};
/*
#define ARV4525PW_PHYRESET 13
#define ARV4525PW_RELAY 31
*/
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio 29 1>;
linux,code = <0x211>;
};
reset {
label = "reset";
gpios = <&gpio 30 1>;
linux,code = <0x198>;
};
};
gpio-leds {
compatible = "gpio-leds";
fxo {
label = "arv4525pw:green:festnetz";
gpios = <&gpio 4 1>;
};
fxs {
label = "arv4525pw:green:internet";
gpios = <&gpio 5 1>;
};
dsl: dsl {
label = "arv4525pw:green:t-dsl";
gpios = <&gpio 6 1>;
};
wifi: wifi {
label = "arv4525pw:green:wlan";
gpios = <&gpio 8 1>;
};
online: online {
label = "arv4525pw:green:online";
gpios = <&gpio 9 1>;
};
};
};