Piotr Dymacz d2c9b169b3 ar71xx: add support for jjPlus JWAP230 ... jjPlus JWAP230 is based on Qualcomm Atheros QCA9558 + QCA8337. Short specification: - 720/600/200 MHz (CPU/DDR/AHB) - 2x 10/100/1000 Mbps Ethernet - 128 MB of RAM (DDR2) - 16 MB of FLASH - 3T3R 2.4 GHz with external PA (SST12LP15A), up to 28 dBm - 3x MMCX connectors - power input: 802.3at PoE or wide range DC (36-57 V) - optional 802.3af PSE - 1x mini-PCIe connector with PCIe, USB buses and SIM slot - 1x mini-PCIe connector with PCIe bus - 1x USB type-A connector - 6x LED, 1x button (hardware reset) - RS232 (MAX3223) and (E)JTAG headers Default configuration: - WAN on eth1 (RJ45 near LEDs with PoE input) - LAN on eth0 (RJ45 near DC jack) - left top LED set to be status LED - all LEDs configurable form user space Flash instruction (do it under U-Boot, using RS232): 1. tftp 0x80060000 lede-ar71xx-generic-jwap230-squashfs-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>		2016-07-13 20:03:10 +02:00
..
board.d	ar71xx: add support for jjPlus JWAP230	2016-07-13 20:03:10 +02:00
hotplug.d	ar71xx: extract ath10k wifi board.bin for the OpenMesh MR1750v2 board	2016-05-23 12:19:26 +02:00
uci-defaults	ar71xx: base-files: remove the now unneeded 09_fix-seama-header	2016-07-11 13:26:36 +02:00
diag.sh	ar71xx: add support for jjPlus JWAP230	2016-07-13 20:03:10 +02:00
inittab	image / basefiles: make console password configurable	2016-04-18 21:53:07 +02:00