Daniel Danzberger affe633be4 ipq40xx: ipq4019: Add new device Compex WPJ419 ... This device contains 2 flash devices. One NOR (32M) and one NAND (128M). U-boot and caldata are on the NOR, the firmware on the NAND. SoC: IPQ4019 CPU: 4x 710MHz ARMv7 RAM: 256MB FLASH: NOR:32MB NAND:128MB ETH: 2x GMAC Gigabit POE: 802.3 af/at POE, IEEE802.3af/IEEE802.3at(48-56V) WIFI: 1x 2.4Ghz Atheros qca4019 2x2 MU-MIMO 1x 5.0Ghz Atheros qca4019 2x2 MU-MIMO USB: 1x 3.0 PCI: 1x Mini PCIe SIM: 1x Slot SD: 1x MicroSD slot BTN: Reset LED: - Power - Ethernet UART: 1x Serial Port 4 Pin Connector (UART) 1x Serial Port 6 Pin Connector (High Speed UART) POWER: 12V 2A Installation ------------ Initial flashing can only be done via u-boot using the following commands: tftpboot openwrt-ipq40xx-generic-compex_wpj419-squashfs-nand-factory.ubi nand erase.chip; nand write ${fileaddr} 0x0 ${filesize} res Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>		2019-11-02 19:25:15 +01:00
..
board.d	ipq40xx: ipq4019: Add new device Compex WPJ419	2019-11-02 19:25:15 +01:00
hotplug.d/firmware	ipq40xx: ipq4019: Add new device Compex WPJ419	2019-11-02 19:25:15 +01:00
init.d	treewide: sync bootcount scripts across targets	2019-08-17 23:52:34 +08:00
inittab