openwrt/target/linux/ipq40xx/base-files/etc/board.d/01_leds
Roger Pueyo Centelles d1f1e5269e ipq40xx: add support for MikroTik SXTsq 5 ac
This commit adds support for the MikroTik SXTsq 5 ac (RBSXTsqG-5acD),
an outdoor 802.11ac wireless CPE with one 10/100/1000 Mbps Ethernet
port.

Specifications:
 - SoC: Qualcomm Atheros IPQ4018
 - RAM: 256 MB
 - Storage: 16 MB NOR
 - Wireless: IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 16 dBi antennae
 - Ethernet: IPQ4018 (SoC) 1x 10/100/1000 port, 10-28 Vdc PoE in
 - 1x Ethernet LED (green)
 - 7x user-controllable LEDs
  · 1x power (blue)
  · 1x user (green)
  · 5x rssi (green)

Note:
 Serial UART is probably available on the board, but it has not been
 tested.

Flashing:
 Boot via TFTP the initramfs image. Then, upload a sysupgrade image
 via SSH and flash it normally. More info at the "Common procedures
 for MikroTik products" page https://openwrt.org/toh/mikrotik/common.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2021-04-29 10:55:07 +02:00

81 lines
2.6 KiB
Plaintext

#
# Copyright (C) 2015 OpenWrt.org
#
. /lib/functions/uci-defaults.sh
board_config_update
board=$(board_name)
case "$board" in
alfa-network,ap120c-ac)
ucidef_set_led_netdev "wan" "WAN" "amber:wan" "eth1"
;;
asus,rt-ac58u)
ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
ucidef_set_led_switch "lan" "LAN" "blue:lan" "switch0" "0x1e"
;;
avm,fritzbox-4040)
ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt" "phy1tpt"
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x1e"
;;
avm,fritzbox-7530 |\
glinet,gl-b1300)
ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt"
;;
edgecore,oap100)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wlan5g" "phy1tpt"
;;
engenius,eap1300)
ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "yellow:wlan5g" "phy1tpt"
ucidef_set_led_default "mesh" "MESH" "blue:mesh" "0"
;;
engenius,eap2200)
ucidef_set_led_netdev "lan1" "LAN1" "blue:lan1" "eth0"
ucidef_set_led_netdev "lan2" "LAN2" "blue:lan2" "eth1"
;;
engenius,ens620ext)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth0"
ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1"
;;
mikrotik,sxtsq-5-ac)
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "rssilow" "green:rssilow" "wlan0" "1" "100"
ucidef_set_led_rssi "rssimediumlow" "rssimediumlow" "green:rssimediumlow" "wlan0" "21" "100"
ucidef_set_led_rssi "rssimedium" "rssimedium" "green:rssimedium" "wlan0" "41" "100"
ucidef_set_led_rssi "rssimediumhigh" "rssimediumhigh" "green:rssimediumhigh" "wlan0" "61" "100"
ucidef_set_led_rssi "rssihigh" "rssihigh" "green:rssihigh" "wlan0" "81" "100"
;;
mobipromo,cm520-79f)
ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "blue:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "blue:lan2" "switch0" "0x08"
;;
netgear,ex6100v2 |\
netgear,ex6150v2)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:router" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:client" "phy1tpt"
;;
qxwlan,e2600ac-c1 |\
qxwlan,e2600ac-c2)
ucidef_set_led_wlan "wlan2g" "WLAN0" "green:wlan0" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN1" "green:wlan1" "phy1tpt"
;;
zyxel,nbg6617 |\
zyxel,wre6606)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
;;
esac
board_config_flush
exit 0