openwrt/target/linux/ath79/image
INAGAKI Hiroshi ff4bc483fc ath79: add support for I-O DATA WN-AC1167DGR
I-O DATA WN-AC1167DGR is a 2.4/5 GHz band 11ac router, based on
Qualcomm Atheros QCA9557.

Specification:

- Qualcomm Atheros QCA9557
- 128 MB of RAM (DDR2)
- 16 MB of Flash (SPI)
- 2T2R 2.4/5 GHz wifi
  - 2.4 GHz: SoC internal
  - 5 GHz: QCA988x
- 5x 10/100/1000 Mbps Ethernet
- 6x LEDs, 6x keys (4x buttons, 1x slide switch)
- UART header on PCB
  - Vcc, GND, TX, RX from ethernet port side
  - 115200n8

Flash instruction using factory image:

1. Connect the computer to the LAN port of WN-AC1167DGR
2. Connect power cable to WN-AC1167DGR and turn on it
3. Access to "http://192.168.0.1/" and open firmware update page
("ファームウェア")
4. Select the OpenWrt factory image and click update ("更新") button
5. Wait ~150 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-08-16 21:20:57 +02:00
..
lzma-loader ath79: lzma-loader: sync with ar71xx target 2018-06-06 22:25:53 +02:00
common-netgear.mk ath79: mark netgear variables as device specific 2018-08-08 08:11:11 +02:00
common-tp-link.mk ath79: add support for TP-Link RE450 v2 2018-07-02 07:05:33 +02:00
generic-tp-link.mk ath79: drop tl prefix for TP-Link RE450 v2 2018-08-13 08:51:31 +02:00
generic-ubnt.mk ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
generic.mk ath79: add support for I-O DATA WN-AC1167DGR 2018-08-16 21:20:57 +02:00
Makefile ath79: add support for Buffalo BHR-4GRV2 2018-08-09 18:44:57 +02:00
nand.mk ath79: add initial nand support for gl-ar300m 2018-06-18 20:29:38 +02:00
tiny-netgear.mk ath79: cleanup netgear wnr612-v2 supported devices 2018-08-08 08:11:11 +02:00
tiny-tp-link.mk ath79: add support for TP-Link MR-3040 v2 2018-08-16 21:20:57 +02:00
tiny.mk ath79: add support for Buffalo WHR-G301N 2018-08-16 21:20:57 +02:00