openwrt/target/linux/ramips/image
Alessio Prescenzo 4a8eaa5c7c ramips: add support for Cudy X6
Specifications:

SoC: MediaTek MT7621
RAM: 256 MB
Flash: 32 MB
WiFi: MediaTek MT7915E
Switch: 1 WAN, 4 LAN (Gigabit)
Ports: 1 USB 3.0
Buttons: Reset, WPS
LEDs: Power, System, Wan, Lan 1-4, WiFi 2.4G, WiFi 5G, WPS, USB
Power: DC 12V 1A tip positive
Installation:

Download and flash the manufacturer's built OpenWRT image available at
http://www.cudytech.com/openwrt_software_download
Install the new OpenWRT image via luci (System -> Backup/Flash firmware)
Be sure to NOT keep settings. The force upgrade may need to be checked
due to differences in router naming conventions.

Recovery:

Loads only signed manufacture firmware due to bootloader RSA verification
serve tftp-recovery image as /recovery.bin on 192.168.1.88/24
connect to any lan ethernet port
power on the device while holding the reset button
wait at least 8 seconds before releasing reset button for image to
download

Signed-off-by: Alessio Prescenzo <alessioprescenzo@gmail.com>
[ensure unique wireless MAC, fix GPIO pingroup]
Signed-off-by: David Bauer <mail@david-bauer.net>
2022-05-09 15:31:01 +02:00
..
lzma-loader ramips: lzma-loader: make FLASH_START configurable 2020-09-03 14:15:30 +02:00
common-tp-link.mk treewide: call check-size before append-metadata 2021-07-10 19:40:10 +02:00
Makefile ramips: move KERNEL_LOADADDR into Device/Default 2022-02-08 23:23:53 +09:00
mt76x8.mk ramips: add support for ASUS RT-AC1200-V2 2022-04-16 15:30:11 +02:00
mt7620.mk ramips: add support for Netgear WN3100RPv2 2022-03-16 23:14:25 +09:00
mt7621.mk ramips: add support for Cudy X6 2022-05-09 15:31:01 +02:00
rt288x.mk ramips: tidy up image subtarget Makefiles 2020-05-08 18:58:39 +02:00
rt305x.mk ramips: fix DEVICE_VENDOR for unbranded devices 2022-03-09 15:38:36 +09:00
rt3883.mk ramips: provide default BLOCKSIZE for Device/seama 2021-08-30 00:37:47 +02:00