mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
dc7efaefb5
Hardware Highlights:
This patch adds support for Western Digital MyBook Live Series:
CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz)
32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory
Board: Apollo-3G - APM82181 Board, 1*SATA
DRAM: 256 MB (2x NT5TU64M16GG-AC)
FLASH: 512 kB (SST 39VF040)
Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610
WARNING: The serial port needs a TTL/RS-232 v3.3 level converter!
The MyBook Live Duo additionally features a 1x USB 2.0 host port
and can support a second hard-drive.
This target produces two images for a target.
1. ext4 image
The extracted/raw image can be directly installed on
the internal HDD via "dd if=img.ext4 of=/dev/sdX".
This can either be done in place with the stock MyBook Live
firmware via ssh. Or by removing the HDD and writing the image
with a different PC.
The the compressed images are useful for sysupgrade.
2. recovery.tar image for TFTP and Serial.
extract the recovery.tar to a TFTP server directory.
On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert:
# setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self
Where 192.168.1.254 is your TFTP server.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
93 lines
1.4 KiB
Bash
93 lines
1.4 KiB
Bash
#!/bin/sh
|
|
|
|
# based on scripts/sysupgrade-nand.sh
|
|
|
|
profile=""
|
|
dtb=""
|
|
dtbname=""
|
|
kernel=""
|
|
rootfs=""
|
|
outfile=""
|
|
err=""
|
|
|
|
while [ "$1" ]; do
|
|
case "$1" in
|
|
"--profile")
|
|
profile="$2"
|
|
shift
|
|
shift
|
|
continue
|
|
;;
|
|
"--dtb")
|
|
dtb="$2"
|
|
shift
|
|
shift
|
|
continue
|
|
;;
|
|
"--dtbname")
|
|
dtbname="$2"
|
|
shift
|
|
shift
|
|
continue
|
|
;;
|
|
"--kernel")
|
|
kernel="$2"
|
|
shift
|
|
shift
|
|
continue
|
|
;;
|
|
"--rootfs")
|
|
rootfs="$2"
|
|
shift
|
|
shift
|
|
continue
|
|
;;
|
|
*)
|
|
if [ ! "$outfile" ]; then
|
|
outfile=$1
|
|
shift
|
|
continue
|
|
else
|
|
shift
|
|
continue
|
|
fi
|
|
;;
|
|
esac
|
|
done
|
|
|
|
if [ -z "$profile" -o ! -r "$dtb" -o ! -r "$kernel" -o ! -r "$rootfs" -o ! "$outfile" ]; then
|
|
echo "syntax: $0 [--profile profilename] [--dtb dtbimage] [--dtbname dtbname] [--kernel kernelimage] [--rootfs rootfs] out"
|
|
exit 1
|
|
fi
|
|
|
|
tmpdir="$( mktemp -d 2> /dev/null )"
|
|
if [ -z "$tmpdir" ]; then
|
|
# try OSX signature
|
|
tmpdir="$( mktemp -t 'roottmp' -d )"
|
|
fi
|
|
|
|
if [ -z "$tmpdir" ]; then
|
|
exit 1
|
|
fi
|
|
|
|
mkdir -p "${tmpdir}/${profile}"
|
|
[ -z "${dtb}" ] || cp "${dtb}" "${tmpdir}/${profile}/${dtbname}"
|
|
[ -z "${rootfs}" ] || cp "${rootfs}" "${tmpdir}/${profile}/uRamdisk"
|
|
[ -z "${kernel}" ] || cp "${kernel}" "${tmpdir}/${profile}/uImage"
|
|
|
|
mtime=""
|
|
if [ -n "$SOURCE_DATE_EPOCH" ]; then
|
|
mtime="--mtime=@${SOURCE_DATE_EPOCH}"
|
|
fi
|
|
|
|
(cd "$tmpdir"; tar cvf ${profile}.tar ${profile} ${mtime})
|
|
err="$?"
|
|
if [ -e "$tmpdir/${profile}.tar" ]; then
|
|
cp "$tmpdir/${profile}.tar" "$outfile"
|
|
else
|
|
err=2
|
|
fi
|
|
rm -rf "$tmpdir"
|
|
|
|
exit $err
|