Felix Fietkau 5f3f1b8cd8 ar71xx: Configure WNDR3700 switch LED colors properly (#8103) ...

For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on
the four LAN port switch LEDs. The LEDs will be lit to indicate a link
and will blink to indicate activity. This matches the stock firmware
and the description printed on the label on the unit's underside.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 23879

2010-11-04 18:55:16 +00:00

..

ap81

ap81: register ethernet devices, and add default network configuration file

2009-03-17 18:07:16 +00:00

ap83

add default network configuration for the AP83 board

2009-06-06 16:01:09 +00:00

ap96

Add support for Atheros AP96 reference board

2010-09-27 08:59:53 +00:00

aw-nr580

add default network configuration for the AW-NR580

2009-02-27 20:49:51 +00:00

bullet-m

ar71xx: add default network configuration for the Bullet M

2009-10-01 19:41:06 +00:00

dir-600-a1

ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563)

2010-10-14 00:14:59 +00:00

dir-615-c1

ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards

2010-04-09 08:40:09 +00:00

dir-825-b1

fix dir-825-b1 default network config after r21905

2010-07-01 00:03:43 +00:00

eap7660d

ar71xx: add support for the Senao EAP7660D board

2010-06-18 16:22:05 +00:00

generic

defconfig: move defaults from /etc/config/defaults/ to /etc/defconfig/, previous location broke uci

2009-02-26 05:54:07 +00:00

jwap003

ar71xx: initial support for jjPlus JWAP003

2010-10-01 07:09:29 +00:00

mzk-w04nu

defconfig: move defaults from /etc/config/defaults/ to /etc/defconfig/, previous location broke uci

2009-02-26 05:54:07 +00:00

pb42

pb42: fix ethernet, remove USB registration, add default network configuration

2009-03-14 18:28:33 +00:00

pb44

ar71xx: add default network configuration for the PB44 board

2010-03-09 18:05:58 +00:00

rb-411

add default network configuration for the RB-411 board

2009-02-28 18:55:46 +00:00

rb-433

ar71xx: add default network configuration file for the RB450/RB433 boards

2010-06-08 20:19:23 +00:00

rb-433u

ar71xx: add default network config for the RB433UAH board

2010-06-12 13:20:41 +00:00

rb-450

ar71xx: add default network configuration file for the RB450/RB433 boards

2010-06-08 20:19:23 +00:00

rb-450g

Add support for the ar8316 switch. This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices.

2010-04-05 23:03:16 +00:00

rb-750

ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new switch driver

2010-10-14 13:41:42 +00:00

routerstation

ar71xx: add default network configuration for RS and RS-Pro

2009-10-20 19:36:47 +00:00

routerstation-pro

Add support for the ar8316 switch. This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices.

2010-04-05 23:03:16 +00:00

tew-632brp

ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards

2010-04-09 08:40:09 +00:00

tl-wa901nd

ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter "Fate" Hollants, from #7528, without the ethernet fifo cfg values)

2010-07-22 12:37:44 +00:00

tl-wr741nd

ar71xx: add a new driver for the ar7240 switch using swconfig. hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563

2010-08-16 19:21:57 +00:00

tl-wr841n-v1

ar71xx: add missing protocol definitions to default network configurations

2010-03-09 18:05:31 +00:00

tl-wr941nd

ar71xx: add missing protocol definitions to default network configurations

2010-03-09 18:05:31 +00:00

tl-wr1043nd

ar71xx: add default network configuration file for the TL-WR1043ND board

2010-02-24 13:39:20 +00:00

wndr3700

ar71xx: Configure WNDR3700 switch LED colors properly (#8103)

2010-11-04 18:55:16 +00:00

wnr2000

wnr2000: enable ar8216 workaround, add network config. LAN ports now work

2009-02-26 05:54:32 +00:00

wp543

ar71xx: add default network configuration file for the WP543 board

2009-10-20 12:59:45 +00:00

wrt160nl

adjust switch default configs for the swconfig api change

2010-01-18 00:38:08 +00:00

wzr-hp-g300nh

ar71xx: don't use vlan 0 for devices with rtl8366s switch

2010-06-26 19:15:32 +00:00