openwrt/target/linux/sunxi/image/cortexa53.mk
Chukun Pan fde68cb809 sunxi: add support for FriendlyARM NanoPi R1S H5
Specification:
  CPU: Allwinner H5, Quad-core Cortex-A53
  DDR3 RAM: 512MB
  Network: 10/100/1000M Ethernet x 2
  USB Host: Type-A x 1
  MicroSD Slot x 1
  MicroUSB: for power input
  Debug Serial Port: 3Pin pin-header
  LED: WAN, LAN, SYS
  KEY: Reset
  Power Supply: DC 5V/2A

Installation:
  Write the image to SD Card with dd.

Note:
  1. OpenWrt currently does not support LED_FUNCTION, change back to the
     previous practice (Consistent with NanoPi R1).
  2. Since the upstream commit https://github.com/torvalds/linux/bbc4d71
     ("net: phy: realtek: fix rtl8211e rx/tx delay config"), we need to
     change the phy-mode from rgmii to rgmii-id.
     So set phy-mode for 5.4 and 5.10 respectively.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
2021-10-30 21:17:20 +02:00

117 lines
2.9 KiB
Makefile

# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2013-2016 OpenWrt.org
# Copyright (C) 2016 Yousong Zhou
define Device/sun50i
SUNXI_DTS_DIR := allwinner/
KERNEL_NAME := Image
KERNEL := kernel-bin
endef
define Device/sun50i-a64
SOC := sun50i-a64
$(Device/sun50i)
endef
define Device/sun50i-h5
SOC := sun50i-h5
$(Device/sun50i)
endef
define Device/sun50i-h6
SOC := sun50i-h6
$(Device/sun50i)
endef
define Device/friendlyarm_nanopi-neo-plus2
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi NEO Plus2
SUPPORTED_DEVICES:=nanopi-neo-plus2
$(Device/sun50i-h5)
endef
TARGET_DEVICES += friendlyarm_nanopi-neo-plus2
define Device/friendlyarm_nanopi-neo2
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := NanoPi NEO2
SUPPORTED_DEVICES:=nanopi-neo2
$(Device/sun50i-h5)
endef
TARGET_DEVICES += friendlyarm_nanopi-neo2
define Device/friendlyarm_nanopi-r1s-h5
DEVICE_VENDOR := FriendlyARM
DEVICE_MODEL := Nanopi R1S H5
DEVICE_PACKAGES := kmod-gpio-button-hotplug kmod-usb-net-rtl8152
SUPPORTED_DEVICES:=nanopi-r1s-h5
$(Device/sun50i-h5)
endef
TARGET_DEVICES += friendlyarm_nanopi-r1s-h5
define Device/libretech_all-h3-cc-h5
DEVICE_VENDOR := Libre Computer
DEVICE_MODEL := ALL-H3-CC
DEVICE_VARIANT := H5
$(Device/sun50i-h5)
SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-libretech-all-h3-cc
endef
TARGET_DEVICES += libretech_all-h3-cc-h5
define Device/olimex_a64-olinuxino
DEVICE_VENDOR := Olimex
DEVICE_MODEL := A64-Olinuxino
DEVICE_PACKAGES := kmod-rtl8723bs rtl8723bs-firmware
$(Device/sun50i-a64)
SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-olinuxino
endef
TARGET_DEVICES += olimex_a64-olinuxino
define Device/olimex_a64-olinuxino-emmc
DEVICE_VENDOR := Olimex
DEVICE_MODEL := A64-Olinuxino
DEVICE_VARIANT := eMMC
DEVICE_PACKAGES := kmod-rtl8723bs rtl8723bs-firmware
$(Device/sun50i-a64)
SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-olinuxino-emmc
endef
TARGET_DEVICES += olimex_a64-olinuxino-emmc
define Device/pine64_pine64-plus
DEVICE_VENDOR := Pine64
DEVICE_MODEL := Pine64+
DEVICE_PACKAGES := kmod-rtl8723bs rtl8723bs-firmware
$(Device/sun50i-a64)
endef
TARGET_DEVICES += pine64_pine64-plus
define Device/pine64_sopine-baseboard
DEVICE_VENDOR := Pine64
DEVICE_MODEL := SoPine
DEVICE_PACKAGES := kmod-rtl8723bs rtl8723bs-firmware
$(Device/sun50i-a64)
endef
TARGET_DEVICES += pine64_sopine-baseboard
define Device/xunlong_orangepi-one-plus
$(Device/sun50i-h6)
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi One Plus
SUNXI_DTS_DIR := allwinner/
endef
TARGET_DEVICES += xunlong_orangepi-one-plus
define Device/xunlong_orangepi-pc2
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi PC 2
$(Device/sun50i-h5)
endef
TARGET_DEVICES += xunlong_orangepi-pc2
define Device/xunlong_orangepi-zero-plus
DEVICE_VENDOR := Xunlong
DEVICE_MODEL := Orange Pi Zero Plus
$(Device/sun50i-h5)
endef
TARGET_DEVICES += xunlong_orangepi-zero-plus