openwrt/target/linux/ramips/base-files/etc/board.d/01_leds
NOGUCHI Hiroshi 83a97c53fa ramips: add support for Netgear R6350
Netgear R6350 is a wireless router, aka Netgear AC1750.

Specification:
- SoC: Mediatek MT7621AT (2 CPU cores, 4 threads)
- RAM: 128MiB (Nanya NT5CC64M16GP-DI)
- ROM: 128MiB NAND Flash (Macronix MX30LF1G18AC-TI)
- Wireless:
   for 11b/g/n (upto 300Mbps): MT7603
   for 11a/ac  (upto 1450Mbps) : MT7615, is not avaliable now
- Ethernet LAN speed: up to 1000Mbps
- Ethernet LAN ports: 4
- Ethernet WAN speed: up to 1000Mbps
- Ethernet WAN ports: 1
- USB ports: 1 (USB 2.0)
- LEDs: 4 (all can be controlled by SoC's GPIO)
- buttons: 2
- serial ports: unknown

Installation through telnet:
  - Copy kernel.bin and rootfs.bin to a USB flash disk,
    plug to usb port on the router.
  - Enable telnet with link: http://192.168.1.1/setup.cgi?todo=debug
    (login if required, default: admin password)
  - You will see "Debug Enabled!"
  - Telnet 192.168.1.1 and login with "root"
  - ls /mnt/shares/ to find out path of your USB disk.
    'myUdisk' for example.
  - cd /mnt/shares/myUdisk
  - mtd_write write rootfs.bin Rootfs
  - mtd_write write kernel.bin Kernel
  - reboot

recovery when bricked:
  nmrpflash can be used to recover to the netgear firmware
  if a broken image was flashed.

The SC_PART_MAP partition suggests that an on flash partition table
exists. After implementing a partition parser/builder for the sercom
partition format, the definitions don't match the flash layout used by
the stock firmware.

It either means the partition format has not yet been completely
understood or it isn't used by the stock firmware. For now, use fixed
partitions instead.

Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com>
[apply latest ramips changes and document the on flash partition map
issues]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-12-16 08:41:41 +01:00

453 lines
14 KiB
Bash
Executable File

#!/bin/sh
. /lib/functions/uci-defaults.sh
set_wifi_led() {
ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
}
board=$(board_name)
boardname="${board##*,}"
board_config_update
case $board in
3g-6200n)
set_wifi_led "$boardname:amber:wlan"
;;
3g-6200nl|\
skylab,skw92a|\
wnce2001)
set_wifi_led "$boardname:green:wlan"
;;
br-6475nd|\
mzk-w300nh2)
set_wifi_led "$boardname:amber:wlan"
;;
ai-br100)
ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" "eth0.2"
set_wifi_led "$boardname:blue:wlan"
;;
air3gii)
set_wifi_led "$boardname:green:wlan"
;;
alfa-network,ac1200rm)
set_wifi_led "$boardname:green:wlan2g" "wlan1"
;;
alfa-network,awusfree1)
set_wifi_led "$boardname:blue:wlan"
;;
all0256n-4M|\
all0256n-8M)
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "all0256n:green:rssilow" "wlan0" "1" "40" "0" "6"
ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "all0256n:green:rssimed" "wlan0" "30" "80" "-29" "5"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "all0256n:green:rssihigh" "wlan0" "70" "100" "-69" "8"
set_wifi_led "rt2800pci-phy0::radio"
;;
ar670w|\
ar725w|\
awapn2403)
set_wifi_led "rt2800soc-phy0::radio"
;;
asl26555-8M|\
asl26555-16M)
ucidef_set_led_netdev "eth" "ETH" "asl26555:green:eth" "eth0"
set_wifi_led "asl26555:green:wlan"
;;
bdcom,wap2100-sk|\
hiwifi,hc5861b)
set_wifi_led "$boardname:green:wlan2g"
;;
broadway)
set_wifi_led "$boardname:red:wps_active"
;;
c108)
ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
ucidef_set_led_netdev "modem" "modem" "$boardname:green:modem" "wwan0"
;;
c20i)
ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
ucidef_set_led_wlan "wlan" "wlan" "$boardname:blue:wlan" "phy0radio"
;;
c50)
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" wlan1
set_wifi_led "$boardname:green:wlan5g"
;;
cf-wr800n)
ucidef_set_led_netdev "lan" "lan" "$boardname:white:ethernet" eth0.1
set_wifi_led "$boardname:white:wifi"
;;
d240)
set_wifi_led "$boardname:blue:wifi"
;;
dcs-930l-b1)
ucidef_set_led_netdev "wifi" "WiFi" "$boardname:blue:wps"
;;
dir-300-b1|\
dir-600-b1|\
dir-620-a1)
set_wifi_led "rt2800pci-phy0::radio"
;;
dir-300-b7|\
dir-320-b1|\
dir-610-a1|\
esr-9753|\
hlk-rm04|\
sl-r7205|\
v11st-fe|\
w306r-v20|\
wt1520-4M|\
wt1520-8M)
set_wifi_led "rt2800pci-phy0::radio"
;;
dir-615-d|\
dir-615-h1)
set_wifi_led "rt2800pci-phy0::radio"
;;
dir-620-d1|\
dlink,dwr-116-a1|\
mzk-ex300np)
set_wifi_led "$boardname:green:wifi"
;;
dlink,dwr-118-a1)
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1f"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x20"
set_wifi_led "$boardname:green:wlan2g" "wlan1"
;;
dlink,dwr-118-a2)
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0e"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
set_wifi_led "$boardname:green:wlan2g" "wlan1"
;;
dlink,dwr-921-c1)
set_wifi_led "$boardname:green:wifi"
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
;;
dir-860l-b1)
ucidef_set_led_netdev "wan" "wan" "$boardname:green:net" "eth0.2"
;;
edimax,br-6478ac-v2)
set_wifi_led "$boardname:blue:wlan"
;;
ex2700|\
wn3000rpv3)
set_wifi_led "$boardname:green:router"
;;
ex3700)
ucidef_set_led_netdev "wlan5g" "ROUTER (green)" "$boardname:green:router" "wlan0"
ucidef_set_led_netdev "wlan2g" "DEVICE (green)" "$boardname:green:device" "wlan1"
;;
f5d8235-v1)
set_wifi_led "$boardname:blue:wireless"
;;
fonera20n)
set_wifi_led "$boardname:orange:wifi"
;;
gnubee,gb-pc1|\
gnubee,gb-pc2)
ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x01"
ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x10"
;;
gl-mt300a|\
gl-mt300n|\
gl-mt750)
set_wifi_led "$boardname:wlan"
;;
gl-mt300n-v2)
set_wifi_led "$boardname:red:wlan"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x1"
;;
hc5661|\
hc5661a)
ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
set_wifi_led "$boardname:blue:wlan2g"
;;
hc5761|\
hc5861)
ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0"
ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1"
;;
hg255d)
set_wifi_led "$boardname:green:wlan"
ucidef_set_led_netdev "internet" "internet" "$boardname:green:internet" "eth0.2"
;;
hpm)
ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
set_wifi_led "$boardname:green:wifi"
;;
ht-tm02)
ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:lan" "eth0"
set_wifi_led "$boardname:blue:wlan"
;;
kimax,u35wf)
set_wifi_led "$boardname:blue:wifi"
ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
;;
kn|\
nbg-419n2)
set_wifi_led "rt2800pci-phy0::radio"
;;
kn_rc|\
kn_rf|\
kng_rc)
set_wifi_led "$boardname:green:wifi"
;;
lava,lr-25g001)
ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "wlan1"
ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:green:wlan5g" "wlan0"
;;
linkits7688)
ucidef_set_led_wlan "wifi" "wifi" "linkit-smart-7688:orange:wifi" "phy0tpt"
;;
m2m)
set_wifi_led "$boardname:blue:wifi"
ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:wan" "eth0"
;;
mikrotik,rbm11g)
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan0" "1" "100"
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan0" "20" "100"
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi2" "wlan0" "40" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi3" "wlan0" "60" "100"
ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "$boardname:green:rssi4" "wlan0" "80" "100"
;;
miniembplug)
set_wifi_led "$boardname:red:wlan"
;;
mir3g)
ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x02" "0x08"
ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x08" "0x08"
ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08"
;;
mlw221|\
mlwg2)
set_wifi_led "$boardname:blue:wifi"
;;
mr-102n)
set_wifi_led "$boardname:green:wlan"
;;
mr200)
ucidef_set_led_netdev "lan" "lan" "$boardname:white:lan" "eth0.1"
ucidef_set_led_netdev "wan" "wan" "$boardname:white:wan" "usb0"
set_wifi_led "$boardname:white:wlan"
;;
mtc,wr1201)
ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x0f"
;;
mzk-ex750np)
set_wifi_led "$boardname:red:wifi"
;;
netgear,r6120)
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WiFi 5GHz" "$boardname:green:wlan5g" "phy1tpt"
;;
oy-0001)
set_wifi_led "$boardname:green:wifi"
;;
pbr-m1)
ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
;;
d-team,newifi-d2)
ucidef_set_led_switch "internet" "internet" "$boardname:amber:internet" "switch0" "0x10"
ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:blue:wlan2g" "wlan0"
ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:blue:wlan5g" "wlan1"
;;
psg1208)
set_wifi_led "$boardname:white:wlan2g"
;;
px-4885-4M|\
px-4885-8M)
set_wifi_led "px-4885:orange:wifi"
;;
r6220|\
netgear,r6350)
ucidef_set_led_netdev "wan" "wan" "$boardname:green:wan" eth0.2
set_wifi_led "$boardname:green:wifi"
;;
re350-v1)
ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$boardname:blue:wifi2G" "wlan0"
ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$boardname:blue:wifi5G" "wlan1"
ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "eth0" "tx rx"
ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x01"
;;
rp-n53)
ucidef_set_led_netdev "eth" "Network" "$boardname:white:back" "eth0"
set_wifi_led "$boardname:blue:wifi"
;;
rt-ac51u)
set_wifi_led "$boardname:blue:wifi"
;;
rt-n12p)
ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0.1
ucidef_set_led_netdev "wan" "wan" "$boardname:green:wan" eth0.2
set_wifi_led "$boardname:green:air"
;;
rt-n14u)
ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" eth0.1
ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" eth0.2
set_wifi_led "$boardname:blue:air"
;;
tama,w06)
ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
;;
tew-714tru)
set_wifi_led "$boardname:green:wifi"
;;
tiny-ac)
set_wifi_led "$boardname:orange:wifi"
;;
tl-wr840n-v4)
ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
;;
tl-wr841n-v13)
ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x2"
ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x4"
ucidef_set_led_switch "lan3" "lan3" "$boardname:green:lan3" "switch0" "0x8"
ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
;;
tplink,c2-v1)
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch1" "0x1e"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch1" "0x01"
set_wifi_led "$boardname:green:wlan"
;;
tplink,c20-v1)
ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0"
;;
tplink,c20-v4)
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan0"
;;
tplink,c50-v3)
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt"
;;
tplink,tl-wa801nd-v5)
ucidef_set_led_wlan "wlan" "wlan" "$boardname:green:wlan" "phy0tpt"
ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
;;
tplink,tl-mr3020-v3)
set_wifi_led "$boardname:green:wlan"
ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
;;
tplink,tl-mr3420-v5|\
tplink,tl-wr842n-v5)
ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
;;
tplink,tl-wr902ac-v3)
ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x10"
;;
u25awf-h1)
set_wifi_led "u25awf:red:wifi"
ucidef_set_led_netdev "eth" "eth" "u25awf:green:lan" "eth0"
;;
u7628-01-128M-16M)
ucidef_set_led_switch "lan1" "lan1" "u7628-01:green:lan1" "switch0" "0x2"
ucidef_set_led_switch "lan2" "lan2" "u7628-01:green:lan2" "switch0" "0x4"
ucidef_set_led_switch "lan3" "lan3" "u7628-01:green:lan3" "switch0" "0x8"
ucidef_set_led_switch "lan4" "lan4" "u7628-01:green:lan4" "switch0" "0x10"
ucidef_set_led_switch "wan" "wan" "u7628-01:green:wan" "switch0" "0x01"
set_wifi_led "u7628-01:green:wlan"
;;
vocore-8M|\
vocore-16M)
ucidef_set_led_netdev "eth" "ETH" "vocore:orange:eth" "eth0"
;;
w502u)
set_wifi_led "rt2800pci-phy0::radio"
;;
wavlink,wl-wn570ha1)
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan0" "1" "49"
ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan0" "50" "84"
ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan0" "85" "100"
set_wifi_led "$boardname:green:wifi"
;;
we1026-5g-16m)
ucidef_set_led_netdev "lan" "LAN" "we1026-5g:green:lan" "eth0"
set_wifi_led "we1026-5g:green:wifi"
;;
wl-wn575a3)
ucidef_set_rssimon "wlan1" "200000" "1"
ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan1" "1" "49"
ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan1" "50" "84"
ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan1" "85" "100"
;;
wrh-300cr)
set_wifi_led "$boardname:green:wlan"
ucidef_set_led_netdev "lan" "lan" "$boardname:green:ethernet" "eth0"
;;
y1)
ucidef_set_led_netdev "wifi" "WIFI" "$boardname:blue:wifi" "wlan1"
ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi5g" "wlan0"
ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x03"
;;
y1s)
ucidef_set_led_netdev "wifi" "WIFI" "$boardname:yellow:wifi" "wlan1"
ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi" "wlan0"
ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:internet" "eth0.2" "tx rx"
;;
youhua,wr1200js)
ucidef_set_led_switch "internet" "INTERNET" "$boardname:green:wan" "switch0" "0x01"
;;
zbt-ape522ii)
ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$boardname:green:wlan2g4" "wlan1"
ucidef_set_led_netdev "sys1" "wlan1" "$boardname:green:sys1" "wlan1" "tx rx"
ucidef_set_led_netdev "sys2" "wlan0" "$boardname:green:sys2" "wlan0" "tx rx"
;;
zbt-wa05)
set_wifi_led "$boardname:blue:air"
;;
zbt-we2026)
set_wifi_led "$boardname:green:wlan"
;;
zbt-we826-16M|\
zbt-we826-32M)
set_wifi_led "zbt-we826:green:wifi"
;;
zbtlink,zbt-we1226)
set_wifi_led "$boardname:green:wlan"
ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x01"
ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x02"
ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x10"
;;
zbt-wr8305rt)
set_wifi_led "$boardname:green:wifi"
;;
zorlik,zl5900v2)
ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0
;;
zyxel,keenetic-extra-ii)
set_wifi_led "$boardname:green:wifi"
ucidef_set_led_switch "internet" "internet" "$boardname:green:internet" "switch0" "0x01"
;;
youku-yk1)
set_wifi_led "$boardname:blue:air"
ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10"
;;
esac
board_config_flush
exit 0