openwrt/target/linux/ath79
Adrian Schmutzler 372529d311 ath79: add support for TP-Link TL-WA901ND v3
This ports support for the TL-WA901ND v3 from ar71xx to ath79.
Most of the hardware is shared with the TL-WA850/860RE v1 range
extenders. It completes the TL-WA901ND series in ath79.

Specifications:
  Board: AP123 / AR9341
  Flash/RAM: 4/32 MiB
  CPU: 535 MHz
  WiFi: 2.4 GHz b/g/n
  Ethernet: 1 port (100M)

Flashing instructions:
  Upload the factory image via the vendor firmware upgrade option.

This has not been tested on device, but port from ar71xx is
straightforward and the device will be disabled by default anyway.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-08 20:40:48 +02:00
..
base-files/etc/hotplug.d/ieee80211 ath79: add mikrotik subtarget 2020-03-17 11:50:47 +01:00
dts ath79: add support for TP-Link TL-WA901ND v3 2020-08-08 20:40:48 +02:00
files kernel: Update kernel 4.19 to version 4.19.131 2020-07-04 21:12:42 +02:00
generic ath79: add support for Compex WPJ563 2020-07-26 02:14:45 +02:00
image ath79: add support for TP-Link TL-WA901ND v3 2020-08-08 20:40:48 +02:00
mikrotik ath79: mikrotik: use base mac on lan for RBwAPG-5HacT2HnD 2020-07-25 22:01:34 +02:00
nand ath79/nand: add support for Netgear WNDR4300TN 2020-08-06 16:56:07 +02:00
patches-4.19 ath79: add support for Arduino Yun 2020-07-08 23:22:30 +02:00
patches-5.4 ath79: add support for Arduino Yun 2020-07-08 23:22:30 +02:00
tiny ath79: add support for TP-Link TL-WA901ND v3 2020-08-08 20:40:48 +02:00
config-4.19 kernel: unify CONFIG_GPIO_SYSFS in kernel configs 2020-08-06 12:37:04 +02:00
config-5.4 kernel: unify CONFIG_GPIO_SYSFS in kernel configs 2020-08-06 12:37:04 +02:00
Makefile ath79: switch to kernel 5.4 2020-07-07 10:33:17 +02:00
modules.mk ath79: add new OF only target for QCA MIPS silicon 2018-05-07 08:06:51 +02:00