openwrt/target/linux/brcm63xx/base-files/etc/diag.sh
Anthony Sepa f9b67b89d3 brcm63xx: add support for the Actiontec R1000H gateway
SOC: Broadcom BCM6368 (2 * Broadcom BMIPS4350 V3.1 / 400 MHz)
Flash size: 32MB (split 16/16 dual boot)
RAM size: 64MB
Wireless: BCM432x 802.11a/b/g/n(pci)
Ethernet: Broadcom BCM53115
USB: 1 x USB 2.0

Known issues:
 - Unable to detect 53115 switch attached to MDIO. Not supported
 - No support for the cable port

More info on the device and the research can be found at:
http://www.actiontec.com/212.html

Same FCC ID as:
https://wikidevi.com/wiki/Actiontec_V1000H_(Telus)

Signed-off-by: Anthony Sepa <anthonysepa@yahoo.ca>
[jonas.gorski: fix commit subject/message]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-30 12:12:17 +02:00

156 lines
2.6 KiB
Bash

#!/bin/sh
# Copyright (C) 2007-2013 OpenWrt.org
. /lib/functions/leds.sh
. /lib/brcm63xx.sh
set_state() {
case "$(brcm63xx_board_name)" in
a4001n1)
status_led="A4001N1:green:power"
;;
a4001n)
status_led="A4001N:green:power"
;;
ar-5381u)
status_led="AR-5381u:green:power"
;;
ar-5387un)
status_led="AR-5387un:green:power"
;;
av4202n)
status_led="AV4202N:white:power"
;;
bcm96348gw)
status_led="96348GW:green:power"
;;
bcm963281tan)
status_led="963281TAN::power"
;;
bcm96328avng)
status_led="96328avng::power"
;;
bcm96348gw-11)
status_led="96348GW-11:green:power"
;;
spw303v)
status_led="spw303v:green:power+adsl"
;;
vh4032n)
status_led="VH4032N:red:power"
;;
vr-3025un)
status_led="VR-3025un:green:power"
;;
vr-3025u)
status_led="VR-3025u:green:power"
;;
vr-3026e)
status_led="VR-3026e:green:power"
;;
wap-5813n)
status_led="WAP-5813n:green:power"
;;
ar1004g)
status_led="AR1004G:green:power"
;;
dsl-274xb-c|\
dsl-274xb-f)
status_led="dsl-274xb:green:power"
;;
dsl-275xb-d)
status_led="dsl-275xb:green:power"
;;
cpva642)
status_led="CPVA642:green:power:"
;;
ct-536p_5621t)
status_led="CT536_CT5621:green:power"
;;
cvg834g)
status_led="CVG834G:green:power"
;;
dsl-2640b-b)
status_led="D-4P-W:green:power"
;;
dgnd3700v1_dgnd3800b)
status_led="DGND3700v1_3800B:green:power"
;;
evg2000)
status_led="EVG2000:green:power"
;;
fast2504n)
status_led="fast2504n:green:ok"
;;
fast2704n)
status_led2="F@ST2704N:red:power"
;;
fast2704v2)
status_led="F@ST2704V2:green:power"
;;
homehub2a)
status_led="HOMEHUB2A:green:upgrading"
status_led2="HOMEHUB2A:blue:upgrading"
;;
gw6200)
status_led="GW6200:green:line1"
status_led2="GW6200:green:tel"
;;
hg553)
status_led="HW553:blue:power"
;;
hg556a_*)
status_led="HW556:red:power"
;;
hg520)
status_led="HW520:green:net"
;;
hg655b)
status_led="HW65x:green:power"
;;
livebox1)
status_led="Livebox1:red:adsl-fail-power"
;;
p870hw-51a_v2)
status_led="P870HW-51a:green:power"
;;
r1000h)
status_led="R1000H:green:power"
;;
r5010un_v2)
status_led="R5010UNv2:green:power"
;;
rta770bw)
status_led="RTA770BW:green:diag"
;;
rta770w)
status_led="RTA770W:green:diag"
;;
spw500v)
status_led="SPW500V:green:power"
;;
v2110)
status_led="V2110:power:green"
;;
esac
case "$1" in
preinit)
status_led_blink_preinit
;;
failsafe)
status_led_blink_failsafe
;;
preinit_regular)
status_led_blink_preinit_regular
;;
done)
if [ "${status_led/power}" != "$status_led" ]; then
status_led_on
else
status_led_off
fi
;;
esac
}