openwrt/target/linux/mpc85xx/patches-5.10
David Bauer 35f6d79513 mpc85xx: add support for Watchguard Firebox T10
Hardware
--------
SoC:    Freescale P1010
RAM:    512MB
FLASH:  1 MB SPI-NOR
        512 MB NAND
ETH:    3x Gigabite Ethernet (Atheros AR8033)
SERIAL: Cisco RJ-45 (115200 8N1)
RTC:    Battery-Backed RTC (I2C)

Installation
------------

1. Patch U-Boot by dumping the content of the SPI-Flash using a SPI
   programmer. The SHA1 hash for the U-Boot password is currently
   unknown.

   A tool for patching U-Boot is available at
   https://github.com/blocktrron/t10-uboot-patcher/

   You can also patch the unknown password yourself. The SHA1 hash is
   E597301A1D89FF3F6D318DBF4DBA0A5ABC5ECBEA

2. Interrupt the bootmenu by pressing CTRL+C. A password prompt appears.
   The patched password is '1234' (without quotation marks)

3. Download the OpenWrt initramfs image. Copy it to a TFTP server
   reachable at 10.0.1.13/24 and rename it to uImage.

4. Connect the TFTP server to ethernet port 0 of the Watchguard T10.

5. Download and boot the initramfs image by entering "tftpboot; bootm;"
   in U-Boot.

6. After OpenWrt booted, create a UBI volume on the old data partition.
   The "ubi" mtd partition should be mtd7, check this using

   $ cat /proc/mtd

   Create a UBI partition by executing

   $ ubiformat /dev/mtd7 -y

7. Increase the loadable kernel-size of U-Boot by executing

   $ fw_setenv SysAKernSize 800000

8. Transfer the OpenWrt sysupgrade image to the Watchguard T10 using
   scp. Install the image by using sysupgrade:

   $ sysupgrade -n <path-to-sysupgrade>

   Note: The LAN ports of the T10 are 1 & 2 while 0 is WAN. You might
   have to change the ethernet-port.

9. OpenWrt should now boot from the internal NAND. Enjoy.

Signed-off-by: David Bauer <mail@david-bauer.net>
2023-03-07 14:05:02 +01:00
..
001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch
100-powerpc-85xx-tl-wdr4900-v1-support.patch kernel: bump 5.10 to 5.10.150 2022-10-30 17:52:42 +01:00
101-powerpc-85xx-hiveap-330-support.patch kernel: bump 5.10 to 5.10.80 2021-11-19 09:40:29 +00:00
102-powerpc-add-cmdline-override.patch kernel: backport of changes & helpers 2023-01-07 17:45:17 +01:00
103-powerpc-85xx-red-15w-rev1.patch kernel: bump 5.10 to 5.10.80 2021-11-19 09:40:29 +00:00
104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch kernel: bump 5.10 to 5.10.20 2021-03-05 20:35:01 +01:00
105-powerpc-85xx-panda-support.patch kernel: bump 5.10 to 5.10.80 2021-11-19 09:40:29 +00:00
106-powerpc-85xx-ws-ap3710i-support.patch kernel: bump 5.10 to 5.10.80 2021-11-19 09:40:29 +00:00
107-powerpc-85xx-add-ws-ap3825i-support.patch kernel: bump 5.10 to 5.10.107 2022-03-19 17:42:41 +01:00
108-powerpc-85xx-firebox-t10-support.patch.patch mpc85xx: add support for Watchguard Firebox T10 2023-03-07 14:05:02 +01:00
900-powerpc-bootwrapper-disable-uImage-generation.patch kernel: bump 5.10 to 5.10.150 2022-10-30 17:52:42 +01:00