Roman Yeryomin ce93b05bf1 gemini: fix hard disk boot on D-Link devices
Since the D-Link devices boot from hard disk we need to
add the following changes to Gemini:

- Supply a bootarg in the device tree so we can boot from
  the right partition (/dev/sda4 on DNS-313)
- Disable forced command line in config so the kernel picks
  up the right bootargs from the device tree
- Enable EXT4 in the config as this is used for rootfs else
  we get nowhere, we cannot load this as a module because,
  well, it is supposed to be loaded from the root partition
  (chicken and egg problem).
- Enable jbd2 and mbcache (needed by ext4)

Also clean out the premature attempts to dynamically
modify the command line in the Image makefile: we should
pass this with the device tree bootargs instead, it works
much better.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-05-05 06:57:00 +02:00
..
2018-02-18 02:59:57 +01:00
2017-10-28 13:59:03 +02:00
2018-02-18 02:59:48 +01:00
2018-04-26 08:53:54 +02:00
2018-04-26 08:54:01 +02:00
2018-04-26 08:54:01 +02:00
2018-04-26 08:53:54 +02:00
2018-04-26 08:53:54 +02:00
2018-01-09 10:26:16 +01:00
2018-04-26 08:54:01 +02:00
2018-02-20 13:25:00 +01:00
2018-02-08 19:04:38 +01:00
2018-04-19 14:38:53 +02:00
2018-04-19 14:38:57 +02:00
2018-03-03 12:58:56 +01:00
2018-04-16 00:22:57 +03:00
2017-01-10 12:49:34 +01:00
2018-03-08 11:44:26 -08:00
2018-02-18 19:51:58 +01:00