openwrt/target/linux/mediatek/dts/mt7986a-acer-predator-w6.dts
George Oldfort ce3b36b3d5 mediatek: split Acer/W6 dts into W6 common dtsi and device specific dts
In order to prepare OpenWrt support for other Acer W6 devices, this commit
moves all device tree components that are used by all Acer W6/W6e/W6d/W6m
routers from mt7986a-acer-predator-w6.dts to mt7986a-acer-w6-common.dtsi
(new file) and includes this dtsi file in mt7986a-acer-predator-w6.dts.

Minor changes had to be made to the device tree in order to improve clarity
and – notably – to reduce the number of dtc warnings:
- replace (obviously wrong) led@<N> gpio led entities by led-<N>
- remove unnecessary (default-state = "off") gpio led statements
- rename entity “memory” to “memory@0”
- add missing #address-cells and #address-size in /soc/mmc@11230000
- add missing #address-cells and #address-size in /soc/pcie@11280000
- introduce symbols “nvmem” and “swport0” in dtsi (referenced in dts)

The changes were checked with `diff -BEZbdtwy --suppress-common-lines ...`
(comparing two dts files created using old and new fdt-1 blobs again), see
https://github.com/openwrt/openwrt/pull/16861/#issuecomment-2455680020 .

This is the first of four commits into which the original commit was split
to make reviews easier and more targeted.

Signed-off-by: George Oldfort <openwrt@10099.de>
Link: https://github.com/openwrt/openwrt/pull/16861
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-11-23 19:33:42 +01:00

161 lines
2.6 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7986a-acer-w6-common.dtsi"
/ {
model = "Acer Predator W6";
compatible = "acer,predator-w6", "mediatek,mt7986a";
aliases {
serial0 = &uart0;
led-boot = &led_status;
led-failsafe = &led_status;
led-running = &led_status;
led-upgrade = &led_status;
};
leds {
compatible = "gpio-leds";
led_status: led-0 {
label = "ant0:red";
gpios = <&pio 1 GPIO_ACTIVE_HIGH>;
};
led-1 {
label = "ant0:green";
gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
};
led-2 {
label = "ant0:blue";
gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
};
led-3 {
label = "ant1:red";
gpios = <&pio 35 GPIO_ACTIVE_HIGH>;
};
led-4 {
label = "ant1:green";
gpios = <&pio 34 GPIO_ACTIVE_HIGH>;
};
led-5 {
label = "ant1:blue";
gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
};
led-6 {
label = "ant2:red";
gpios = <&pio 38 GPIO_ACTIVE_HIGH>;
};
led-7 {
label = "ant2:green";
gpios = <&pio 37 GPIO_ACTIVE_HIGH>;
};
led-8 {
label = "ant2:blue";
gpios = <&pio 26 GPIO_ACTIVE_HIGH>;
};
led-9 {
label = "ant3:red";
gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
};
led-10 {
label = "ant3:green";
gpios = <&pio 24 GPIO_ACTIVE_HIGH>;
};
led-11 {
label = "ant3:blue";
gpios = <&pio 23 GPIO_ACTIVE_HIGH>;
};
led-12 {
label = "ant4:red";
gpios = <&pio 28 GPIO_ACTIVE_HIGH>;
};
led-13 {
label = "ant4:green";
gpios = <&pio 27 GPIO_ACTIVE_HIGH>;
};
led-14 {
label = "ant4:blue";
gpios = <&pio 32 GPIO_ACTIVE_HIGH>;
};
led-15 {
label = "ant5:red";
gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
};
led-16 {
label = "ant5:green";
gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
};
led-17 {
label = "ant5:blue";
gpios = <&pio 43 GPIO_ACTIVE_HIGH>;
};
};
};
&ssusb {
vusb33-supply = <&reg_3p3v>;
vbus-supply = <&reg_5v>;
status = "okay";
};
&nvmem {
eeprom_factory_a0000: eeprom@a0000 {
reg = <0xa0000 0x1000>;
};
};
&slot0 {
radio0: mt7915@0,0 {
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_a0000>;
nvmem-cell-names = "eeprom";
};
};
&usb_phy {
status = "okay";
};
&eth {
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
phy-mode = "2500base-x";
phy-handle = <&phy6>;
};
};
&mdio {
phy6: phy@6 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <6>;
reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <10000>;
/* LED0: nc ; LED1: nc ; LED2: amber ; LED3: green */
mxl,led-config = <0x0 0x0 0x370 0x80>;
};
};
&swport0 {
label = "game";
};