mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
7a58972680
The current uboot default config for the A13 SOM erroneously enables support for the AXP209 power regulator IC which is not present on the board. This superfluous support module sets an incorrect initial clock frequency and confuses the kernel, ultimately leading to a boot failure later on. Properly disable the PMIC support and enable the EHCI support by translating the deprecated SYS_EXTRA_OPTIONS values into proper SUNXI_NO_PMIC and USB_EHCI_HCD symbols respectively. Also rename 002-add-olimex-a13-som.diff to 002-add-olimex-a13-som.patch and refresh the remaining patches of the series while we're at it. Reported-by: Mario Fischer <mario-fischer@web.de> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
33 lines
1013 B
Diff
33 lines
1013 B
Diff
From a58eb20fb80f478038243e9e0f30f6984725e265 Mon Sep 17 00:00:00 2001
|
|
From: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
|
|
Date: Tue, 6 Jan 2015 15:47:18 +0100
|
|
Subject: sun6i: Sync PLL1 multipliers/dividers with Boot1
|
|
|
|
This change syncs up the multipliers and dividers used to initialize
|
|
PLL1 (i.e. the fast clock driving the ARM cores) with the values used
|
|
in Allwinner's Boot1 on sun6i.
|
|
|
|
More specifically, the following settings are now used:
|
|
* up to 768MHz: mul=2, div=2 (was: mul=1, div=1)
|
|
* up to 1152MHz: mul=3, div=2 (unchanged)
|
|
* above 1152MHz: mul=4, div=2 (was: mul=2, div=1)
|
|
|
|
--- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
|
|
+++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
|
|
@@ -122,11 +122,12 @@ void clock_set_pll1(unsigned int clk)
|
|
struct sunxi_ccm_reg * const ccm =
|
|
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
const int p = 0;
|
|
- int k = 1;
|
|
- int m = 1;
|
|
+ int k = 2;
|
|
+ int m = 2;
|
|
|
|
if (clk > 1152000000) {
|
|
- k = 2;
|
|
+ k = 4;
|
|
+ m = 2;
|
|
} else if (clk > 768000000) {
|
|
k = 3;
|
|
m = 2;
|