openwrt/target/linux/adm5120/files/drivers/usb/host/adm5120-q.c
Gabor Juhos cda3dc3ae1 USB driver fixes
SVN-Revision: 9513
2007-11-08 12:28:27 +00:00

705 lines
17 KiB
C

/*
* OHCI HCD (Host Controller Driver) for USB.
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
*
* This file is licenced under the GPL.
*/
#include <linux/irq.h>
/*-------------------------------------------------------------------------*/
/*
* URB goes back to driver, and isn't reissued.
* It's completely gone from HC data structures.
* PRECONDITION: ahcd lock held, irqs blocked.
*/
static void
finish_urb(struct admhcd *ahcd, struct urb *urb)
__releases(ahcd->lock)
__acquires(ahcd->lock)
{
urb_priv_free(ahcd, urb->hcpriv);
urb->hcpriv = NULL;
spin_lock(&urb->lock);
if (likely(urb->status == -EINPROGRESS))
urb->status = 0;
/* report short control reads right even though the data TD always
* has TD_R set. (much simpler, but creates the 1-td limit.)
*/
if (unlikely(urb->transfer_flags & URB_SHORT_NOT_OK)
&& unlikely(usb_pipecontrol(urb->pipe))
&& urb->actual_length < urb->transfer_buffer_length
&& usb_pipein(urb->pipe)
&& urb->status == 0) {
urb->status = -EREMOTEIO;
#ifdef ADMHC_VERBOSE_DEBUG
urb_print(ahcd, urb, "SHORT", usb_pipeout (urb->pipe));
#endif
}
spin_unlock(&urb->lock);
switch (usb_pipetype(urb->pipe)) {
case PIPE_ISOCHRONOUS:
admhcd_to_hcd(ahcd)->self.bandwidth_isoc_reqs--;
break;
case PIPE_INTERRUPT:
admhcd_to_hcd(ahcd)->self.bandwidth_int_reqs--;
break;
}
#ifdef ADMHC_VERBOSE_DEBUG
urb_print(ahcd, urb, "FINISH", 0);
#endif
/* urb->complete() can reenter this HCD */
spin_unlock(&ahcd->lock);
usb_hcd_giveback_urb(admhcd_to_hcd(ahcd), urb);
spin_lock(&ahcd->lock);
}
/*-------------------------------------------------------------------------*
* ED handling functions
*-------------------------------------------------------------------------*/
static struct ed *ed_create(struct admhcd *ahcd, unsigned int type, u32 info)
{
struct ed *ed;
struct td *td;
ed = ed_alloc(ahcd, GFP_ATOMIC);
if (!ed)
goto err;
/* dummy td; end of td list for this ed */
td = td_alloc(ahcd, GFP_ATOMIC);
if (!td)
goto err_free_ed;
switch (type) {
case PIPE_INTERRUPT:
info |= ED_INT;
break;
case PIPE_ISOCHRONOUS:
info |= ED_ISO;
break;
}
ed->dummy = td;
ed->state = ED_NEW;
ed->type = type;
ed->hwINFO = cpu_to_hc32(ahcd, info);
ed->hwTailP = cpu_to_hc32(ahcd, td->td_dma);
ed->hwHeadP = cpu_to_hc32(ahcd, td->td_dma);
return ed;
err_free_ed:
ed_free(ahcd, ed);
err:
return NULL;
}
/* get and maybe (re)init an endpoint. init _should_ be done only as part
* of enumeration, usb_set_configuration() or usb_set_interface().
*/
static struct ed *ed_get(struct admhcd *ahcd, struct usb_host_endpoint *ep,
struct usb_device *udev, unsigned int pipe, int interval)
{
struct ed *ed;
unsigned long flags;
spin_lock_irqsave(&ahcd->lock, flags);
ed = ep->hcpriv;
if (!ed) {
u32 info;
/* FIXME: usbcore changes dev->devnum before SET_ADDRESS
* suceeds ... otherwise we wouldn't need "pipe".
*/
info = usb_pipedevice(pipe);
info |= (ep->desc.bEndpointAddress & ~USB_DIR_IN) << ED_EN_SHIFT;
info |= le16_to_cpu(ep->desc.wMaxPacketSize) << ED_MPS_SHIFT;
if (udev->speed == USB_SPEED_FULL)
info |= ED_SPEED_FULL;
ed = ed_create(ahcd, usb_pipetype(pipe), info);
if (ed)
ep->hcpriv = ed;
}
spin_unlock_irqrestore(&ahcd->lock, flags);
return ed;
}
/* link an ed into the HC chain */
static int ed_schedule(struct admhcd *ahcd, struct ed *ed)
{
struct ed *old_tail;
if (admhcd_to_hcd(ahcd)->state == HC_STATE_QUIESCING)
return -EAGAIN;
if (ed->state != ED_NEW)
return 0;
admhc_dump_ed(ahcd, "ED-SCHED", ed, 0);
ed->state = ED_IDLE;
ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP);
old_tail = ahcd->ed_tails[ed->type];
ed->ed_next = old_tail->ed_next;
if (ed->ed_next) {
ed->ed_next->ed_prev = ed;
ed->hwNextED = cpu_to_hc32(ahcd, ed->ed_next->dma);
}
ed->ed_prev = old_tail;
old_tail->ed_next = ed;
old_tail->hwNextED = cpu_to_hc32(ahcd, ed->dma);
ahcd->ed_tails[ed->type] = ed;
admhc_intr_enable(ahcd, ADMHC_INTR_SOFI);
return 0;
}
static void ed_deschedule(struct admhcd *ahcd, struct ed *ed)
{
admhc_dump_ed(ahcd, "ED-DESCHED", ed, 0);
/* remove this ED from the HC list */
ed->ed_prev->hwNextED = ed->hwNextED;
/* and remove it from our list */
ed->ed_prev->ed_next = ed->ed_next;
if (ed->ed_next) {
ed->ed_next->ed_prev = ed->ed_prev;
ed->ed_next = NULL;
}
if (ahcd->ed_tails[ed->type] == ed)
ahcd->ed_tails[ed->type] = ed->ed_prev;
ed->state = ED_NEW;
}
static void ed_start_deschedule(struct admhcd *ahcd, struct ed *ed)
{
admhc_dump_ed(ahcd, "ED-UNLINK", ed, 0);
ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP);
ed->state = ED_UNLINK;
/* add this ED into the remove list */
ed->ed_rm_next = ahcd->ed_rm_list;
ahcd->ed_rm_list = ed;
/* SOF interrupt might get delayed; record the frame counter value that
* indicates when the HC isn't looking at it, so concurrent unlinks
* behave. frame_no wraps every 2^16 msec, and changes right before
* SOF is triggered.
*/
ed->tick = admhc_frame_no(ahcd) + 1;
/* enable SOF interrupt */
admhc_intr_enable(ahcd, ADMHC_INTR_SOFI);
}
/*-------------------------------------------------------------------------*
* TD handling functions
*-------------------------------------------------------------------------*/
static void td_fill(struct admhcd *ahcd, u32 info, dma_addr_t data, int len,
struct urb_priv *up)
{
struct td *td;
u32 cbl = 0;
if (up->td_idx >= up->td_cnt) {
admhc_dbg(ahcd, "td_fill error, idx=%d, cnt=%d\n", up->td_idx,
up->td_cnt);
return;
}
td = up->td[up->td_idx];
td->data_dma = data;
if (!len)
data = 0;
#if 1
if (up->td_idx == up->td_cnt-1)
#endif
cbl |= TD_IE;
if (data)
cbl |= (len & TD_BL_MASK);
info |= TD_OWN;
/* setup hardware specific fields */
td->hwINFO = cpu_to_hc32(ahcd, info);
td->hwDBP = cpu_to_hc32(ahcd, data);
td->hwCBL = cpu_to_hc32(ahcd, cbl);
if (up->td_idx > 0)
up->td[up->td_idx-1]->hwNextTD = cpu_to_hc32(ahcd, td->td_dma);
up->td_idx++;
}
/*-------------------------------------------------------------------------*/
/* Prepare all TDs of a transfer, and queue them onto the ED.
* Caller guarantees HC is active.
* Usually the ED is already on the schedule, so TDs might be
* processed as soon as they're queued.
*/
static void td_submit_urb(struct admhcd *ahcd, struct urb *urb)
{
struct urb_priv *urb_priv = urb->hcpriv;
dma_addr_t data;
int data_len = urb->transfer_buffer_length;
int cnt = 0;
u32 info = 0;
int is_out = usb_pipeout(urb->pipe);
u32 toggle = 0;
/* OHCI handles the bulk/interrupt data toggles itself. We just
* use the device toggle bits for resetting, and rely on the fact
* that resetting toggle is meaningless if the endpoint is active.
*/
if (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), is_out)) {
toggle = TD_T_CARRY;
} else {
toggle = TD_T_DATA0;
usb_settoggle(urb->dev, usb_pipeendpoint (urb->pipe),
is_out, 1);
}
urb_priv->td_idx = 0;
if (data_len)
data = urb->transfer_dma;
else
data = 0;
/* NOTE: TD_CC is set so we can tell which TDs the HC processed by
* using TD_CC_GET, as well as by seeing them on the done list.
* (CC = NotAccessed ... 0x0F, or 0x0E in PSWs for ISO.)
*/
switch (urb_priv->ed->type) {
case PIPE_INTERRUPT:
info = is_out
? TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_OUT
: TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_IN;
/* setup service interval and starting frame number */
info |= (urb->start_frame & TD_FN_MASK);
info |= (urb->interval & TD_ISI_MASK) << TD_ISI_SHIFT;
td_fill(ahcd, info, data, data_len, urb_priv);
cnt++;
admhcd_to_hcd(ahcd)->self.bandwidth_int_reqs++;
break;
case PIPE_BULK:
info = is_out
? TD_SCC_NOTACCESSED | TD_DP_OUT
: TD_SCC_NOTACCESSED | TD_DP_IN;
/* TDs _could_ transfer up to 8K each */
while (data_len > TD_DATALEN_MAX) {
td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle),
data, TD_DATALEN_MAX, urb_priv);
data += TD_DATALEN_MAX;
data_len -= TD_DATALEN_MAX;
cnt++;
}
td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle), data,
data_len, urb_priv);
cnt++;
if ((urb->transfer_flags & URB_ZERO_PACKET)
&& (cnt < urb_priv->td_cnt)) {
td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle),
0, 0, urb_priv);
cnt++;
}
break;
/* control manages DATA0/DATA1 toggle per-request; SETUP resets it,
* any DATA phase works normally, and the STATUS ack is special.
*/
case PIPE_CONTROL:
/* fill a TD for the setup */
info = TD_SCC_NOTACCESSED | TD_DP_SETUP | TD_T_DATA0;
td_fill(ahcd, info, urb->setup_dma, 8, urb_priv);
cnt++;
if (data_len > 0) {
/* fill a TD for the data */
info = TD_SCC_NOTACCESSED | TD_T_DATA1;
info |= is_out ? TD_DP_OUT : TD_DP_IN;
/* NOTE: mishandles transfers >8K, some >4K */
td_fill(ahcd, info, data, data_len, urb_priv);
cnt++;
}
/* fill a TD for the ACK */
info = (is_out || data_len == 0)
? TD_SCC_NOTACCESSED | TD_DP_IN | TD_T_DATA1
: TD_SCC_NOTACCESSED | TD_DP_OUT | TD_T_DATA1;
td_fill(ahcd, info, data, 0, urb_priv);
cnt++;
break;
/* ISO has no retransmit, so no toggle;
* Each TD could handle multiple consecutive frames (interval 1);
* we could often reduce the number of TDs here.
*/
case PIPE_ISOCHRONOUS:
info = TD_SCC_NOTACCESSED;
for (cnt = 0; cnt < urb->number_of_packets; cnt++) {
int frame = urb->start_frame;
frame += cnt * urb->interval;
frame &= TD_FN_MASK;
td_fill(ahcd, info | frame,
data + urb->iso_frame_desc[cnt].offset,
urb->iso_frame_desc[cnt].length,
urb_priv);
}
admhcd_to_hcd(ahcd)->self.bandwidth_isoc_reqs++;
break;
}
if (urb_priv->td_cnt != cnt)
admhc_err(ahcd, "bad number of tds created for urb %p\n", urb);
urb_priv->td_idx = 0;
}
/* calculate transfer length/status and update the urb
* PRECONDITION: irqsafe (only for urb->status locking)
*/
static int td_done(struct admhcd *ahcd, struct urb *urb, struct td *td)
{
u32 info = hc32_to_cpup(ahcd, &td->hwINFO);
u32 dbp = hc32_to_cpup(ahcd, &td->hwDBP);
u32 cbl = TD_BL_GET(hc32_to_cpup(ahcd, &td->hwCBL));
int type = usb_pipetype(urb->pipe);
int cc;
cc = TD_CC_GET(info);
/* ISO ... drivers see per-TD length/status */
if (type == PIPE_ISOCHRONOUS) {
#if 0
/* TODO */
int dlen = 0;
/* NOTE: assumes FC in tdINFO == 0, and that
* only the first of 0..MAXPSW psws is used.
*/
cc = TD_CC_GET(td);
if (tdINFO & TD_CC) /* hc didn't touch? */
return;
if (usb_pipeout (urb->pipe))
dlen = urb->iso_frame_desc[td->index].length;
else {
/* short reads are always OK for ISO */
if (cc == TD_DATAUNDERRUN)
cc = TD_CC_NOERROR;
dlen = tdPSW & 0x3ff;
}
urb->actual_length += dlen;
urb->iso_frame_desc[td->index].actual_length = dlen;
urb->iso_frame_desc[td->index].status = cc_to_error[cc];
if (cc != TD_CC_NOERROR)
admhc_vdbg (ahcd,
"urb %p iso td %p (%d) len %d cc %d\n",
urb, td, 1 + td->index, dlen, cc);
#endif
/* BULK, INT, CONTROL ... drivers see aggregate length/status,
* except that "setup" bytes aren't counted and "short" transfers
* might not be reported as errors.
*/
} else {
admhc_dump_td(ahcd, "td_done", td);
/* count all non-empty packets except control SETUP packet */
if ((type != PIPE_CONTROL || td->index != 0) && dbp != 0) {
urb->actual_length += dbp - td->data_dma + cbl;
}
}
return cc;
}
/*-------------------------------------------------------------------------*/
static inline struct td *
ed_halted(struct admhcd *ahcd, struct td *td, int cc, struct td *rev)
{
#if 0
struct urb *urb = td->urb;
struct ed *ed = td->ed;
struct list_head *tmp = td->td_list.next;
__hc32 toggle = ed->hwHeadP & cpu_to_hc32 (ahcd, ED_C);
admhc_dump_ed(ahcd, "ed halted", td->ed, 1);
/* clear ed halt; this is the td that caused it, but keep it inactive
* until its urb->complete() has a chance to clean up.
*/
ed->hwINFO |= cpu_to_hc32 (ahcd, ED_SKIP);
wmb ();
ed->hwHeadP &= ~cpu_to_hc32 (ahcd, ED_H);
/* put any later tds from this urb onto the donelist, after 'td',
* order won't matter here: no errors, and nothing was transferred.
* also patch the ed so it looks as if those tds completed normally.
*/
while (tmp != &ed->td_list) {
struct td *next;
__hc32 info;
next = list_entry(tmp, struct td, td_list);
tmp = next->td_list.next;
if (next->urb != urb)
break;
/* NOTE: if multi-td control DATA segments get supported,
* this urb had one of them, this td wasn't the last td
* in that segment (TD_R clear), this ed halted because
* of a short read, _and_ URB_SHORT_NOT_OK is clear ...
* then we need to leave the control STATUS packet queued
* and clear ED_SKIP.
*/
info = next->hwINFO;
#if 0 /* FIXME */
info |= cpu_to_hc32 (ahcd, TD_DONE);
info &= ~cpu_to_hc32 (ahcd, TD_CC);
#endif
next->hwINFO = info;
next->next_dl_td = rev;
rev = next;
ed->hwHeadP = next->hwNextTD | toggle;
}
/* help for troubleshooting: report anything that
* looks odd ... that doesn't include protocol stalls
* (or maybe some other things)
*/
switch (cc) {
case TD_CC_DATAUNDERRUN:
if ((urb->transfer_flags & URB_SHORT_NOT_OK) == 0)
break;
/* fallthrough */
case TD_CC_STALL:
if (usb_pipecontrol (urb->pipe))
break;
/* fallthrough */
default:
admhc_dbg (ahcd,
"urb %p path %s ep%d%s %08x cc %d --> status %d\n",
urb, urb->dev->devpath,
usb_pipeendpoint (urb->pipe),
usb_pipein (urb->pipe) ? "in" : "out",
hc32_to_cpu(ahcd, td->hwINFO),
cc, cc_to_error [cc]);
}
return rev;
#else
return NULL;
#endif
}
/*-------------------------------------------------------------------------*/
static int ed_next_urb(struct admhcd *ahcd, struct ed *ed)
{
struct urb_priv *up;
u32 carry;
if (ed->state != ED_IDLE)
return 1;
if (ed->urb_active)
return 1;
if (list_empty(&ed->urb_pending))
return 0;
up = list_entry(ed->urb_pending.next, struct urb_priv, pending);
list_del(&up->pending);
ed->urb_active = up;
ed->state = ED_OPER;
#ifdef ADMHC_VERBOSE_DEBUG
urb_print(ahcd, up->urb, "NEXT", 0);
admhc_dump_ed(ahcd, " ", ed, 0);
#endif
up->td[up->td_cnt-1]->hwNextTD = cpu_to_hc32(ahcd, ed->dummy->td_dma);
carry = hc32_to_cpup(ahcd, &ed->hwHeadP) & ED_C;
ed->hwHeadP = cpu_to_hc32(ahcd, up->td[0]->td_dma | carry);
ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP);
return 1;
}
static void ed_update(struct admhcd *ahcd, struct ed *ed, int partial)
{
struct urb_priv *up;
struct urb *urb;
int cc;
up = ed->urb_active;
if (!up)
return;
urb = up->urb;
#ifdef ADMHC_VERBOSE_DEBUG
urb_print(ahcd, urb, "UPDATE", 0);
#endif
admhc_dump_ed(ahcd, "ED-UPDATE", ed, 1);
cc = TD_CC_NOERROR;
for (; up->td_idx < up->td_cnt; up->td_idx++) {
struct td *td = up->td[up->td_idx];
if (hc32_to_cpup(ahcd, &td->hwINFO) & TD_OWN)
break;
cc = td_done(ahcd, urb, td);
if (cc != TD_CC_NOERROR) {
admhc_vdbg(ahcd,
"urb %p td %p (%d) cc %d, len=%d/%d\n",
urb, td, td->index, cc,
urb->actual_length,
urb->transfer_buffer_length);
up->td_idx = up->td_cnt;
break;
}
}
if ((up->td_idx != up->td_cnt) && (!partial))
/* the URB is not completed yet */
return;
/* update packet status if needed (short is normally ok) */
if (cc == TD_CC_DATAUNDERRUN
&& !(urb->transfer_flags & URB_SHORT_NOT_OK))
cc = TD_CC_NOERROR;
if (cc != TD_CC_NOERROR && cc < TD_CC_HCD0) {
spin_lock(&urb->lock);
if (urb->status == -EINPROGRESS)
urb->status = cc_to_error[cc];
spin_unlock(&urb->lock);
}
finish_urb(ahcd, urb);
ed->urb_active = NULL;
ed->state = ED_IDLE;
}
/* there are some tds completed; called in_irq(), with HCD locked */
static void admhc_td_complete(struct admhcd *ahcd)
{
struct ed *ed;
for (ed = ahcd->ed_head; ed; ed = ed->ed_next) {
if (ed->state != ED_OPER)
continue;
if (hc32_to_cpup(ahcd, &ed->hwINFO) & ED_SKIP)
continue;
if (hc32_to_cpup(ahcd, &ed->hwHeadP) & ED_H) {
/* TODO */
continue;
}
ed_update(ahcd, ed, 0);
}
}
/* there are some urbs/eds to unlink; called in_irq(), with HCD locked */
static void admhc_finish_unlinks(struct admhcd *ahcd, u16 tick)
{
struct ed *ed;
for (ed = ahcd->ed_head; ed; ed = ed->ed_next) {
if (ed->state != ED_UNLINK)
continue;
if (likely(HC_IS_RUNNING(admhcd_to_hcd(ahcd)->state)))
if (tick_before(tick, ed->tick))
continue;
/* process partial status */
ed_update(ahcd, ed, 1);
}
}
static void admhc_sof_refill(struct admhcd *ahcd)
{
struct ed *ed;
int disable_dma = 1;
for (ed = ahcd->ed_head; ed; ed = ed->ed_next) {
if (hc32_to_cpup(ahcd, &ed->hwHeadP) & ED_H) {
ed_update(ahcd, ed, 1);
ed->hwHeadP &= ~cpu_to_hc32 (ahcd, ED_H);
}
if (ed_next_urb(ahcd, ed)) {
disable_dma = 0;
} else {
struct ed *tmp;
tmp = ed->ed_prev;
ed_deschedule(ahcd, ed);
ed = tmp;
}
}
if (disable_dma) {
admhc_intr_disable(ahcd, ADMHC_INTR_SOFI);
admhc_dma_disable(ahcd);
} else {
admhc_intr_enable(ahcd, ADMHC_INTR_SOFI);
admhc_dma_enable(ahcd);
}
}