openwrt/target/linux/ramips/dts/mt7621_tplink_mr600-v2-eu.dts

// SPDX-License-Identifier: GPL-2.0-or-later

#include "mt7621.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>

/ {
	compatible = "tplink,mr600-v2-eu", "mediatek,mt7621-soc";
	model = "TP-Link MR600 v2 (EU)";

	aliases {
		led-boot = &led_power;
		led-failsafe = &led_power;
		led-running = &led_power;
		led-upgrade = &led_power;
		label-mac-device = &gmac0;
	};

	chosen {
		bootargs = "console=ttyS0,115200";
	};

	keys {
		compatible = "gpio-keys";

		wlan {
			label = "wlan";
			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WLAN>;
		};

		reset {
			label = "reset";
			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led_power: power {
			label = "white:power";
			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
		};
		wlan {
			label = "white:wlan";
			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy1tpt";
		};
		wan {
			label = "white:wan";
			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
		};

		signal1 {
			label = "white:signal1";
			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
		};

		signal2 {
			label = "white:signal2";
			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
		};

		signal3 {
			label = "white:signal3";
			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
		};

		4g {
			label = "white:4g";
			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
		};
		lan {
			label = "white:lan";
			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
		};
	};

};

&spi0 {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <80000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "uboot";
				reg = <0x00000 0x20000>;
				read-only;
			};

			partition@20000 {
				compatible = "openwrt,uimage";
				openwrt,offset = <512>; /* account for the 512-byte long header */
				label = "firmware";
				reg = <0x20000 0xfa0000>;
			};

			romfile: partition@fc0000 {
				label = "romfile";
				reg = <0xfc0000 0x10000>;
				read-only;
			};

			partition@fd0000 {
				label = "config";
				reg = <0xfd0000 0x10000>;
				read-only;
			};

			radio: partition@fe0000 {
				label = "radio";
				reg = <0xfe0000 0x10000>;
				read-only;
			};
		};
	};
};

&pcie {
	status = "okay";
};


&pcie0 {
	mt76@0,0 {
		compatible = "mediatek,mt76";
		reg = <0x0000 0 0 0 0>;
		nvmem-cells = <&macaddr_romfile_f100>;
		nvmem-cell-names = "mac-address";
		mediatek,mtd-eeprom = <&radio 0x0>;
		mtd-mac-address = <&romfile 0xf100>;
		ieee80211-freq-limit = <2400000 2500000>;
	};
};

&pcie1 {
	mt76@0,0 {
		compatible = "mediatek,mt76";
		reg = <0x0000 0 0 0 0>;
		mediatek,mtd-eeprom = <&radio 0x8000>;
		ieee80211-freq-limit = <5000000 6000000>;
		nvmem-cells = <&macaddr_romfile_f100>;
		nvmem-cell-names = "mac-address";
		mac-address-increment = <(-1)>;
	};
};

&gmac0 {
	nvmem-cells = <&macaddr_romfile_f100>;
	nvmem-cell-names = "mac-address";
};

&gmac1 {
	status = "okay";
	label = "wan";
	phy-handle = <&ethphy4>;

	nvmem-cells = <&macaddr_romfile_f100>;
	nvmem-cell-names = "mac-address";
};

&mdio {
	ethphy4: ethernet-phy@4 {
		reg = <4>;
	};
};


&switch0 {
	ports {
		port@1 {
			status = "okay";
			label = "lan1";
		};
		port@2 {
			status = "okay";
			label = "lan2";
		};
		port@3 {
			status = "okay";
			label = "lan3";
		};
	};
};

&romfile {
	compatible = "nvmem-cells";
	#address-cells = <1>;
	#size-cells = <1>;

	macaddr_romfile_f100: romfile@f100 {
		reg = <0xf100 0x6>;
	};
};